Posts by CyberXenon

Hi All,

I'm running a Raspberry Pi 4b (4GB) System wit LE 11.0.3. I have a Problem with H.264 SD Data (576p). The Audo Video is not synchron (delay of 0.5 s). On all other codecs (and formats) I have no problem. I've tested H.264 1080p an 720p; MPEG-4 (480p) and H.265 with 576p. All these files have no problems. The settings "Adjust display refresh rate"and "Sync playback to display" solved both (single and in combination) not the problem. The command in config.txt (force_turbo=1 and core_freq_min=500) mentioned in the changelog helped not, too. After some investigation I found out that it is not the Video codec. It seems to be the Audio-format. When playing files with e.g. "ff-mp2, 16 bits, 44,1 Hz" evreything is fine. Playing "ff-mp3float, 32 bits, 48,0 Hz" the sync issue is there. The Issue is only on my Raspi. Playing the files on Windows or Android, there is no issue. The problem is there, playing the files from my NAS and playing files from USB-Drive. Here is my Log:

Pastekodi

Is there anyone out there, facing the same problem? Do you have a solution for this?

Thanks a lot!

Thanks, it was the cable! First I don't want to belive that, related to the fact that Raspberry Pi OS was working (and the old version of Libreelec, i guess 9). But with a new cable I now have a Signal. Thank you

Hi All,

after a fresh install, I have no Option to choose HDMI as Audio Output. I'm working on an RPI4b with LibreELEC 11.0.1. With LE 9.2 everything was working fine (same setup). First I had even no Video Output, but after adding "video=HDMI-A-1:1920x1080M@60" to the cmdline.txt, the Video was there. I`'ve tried also a couple of different options in config.txt, but with no positive effect. I've tried also different SD-Cards, Power-Supplies and Imager (LibreELEC-Creator and Etcher)

aplay -l lists me two HDMI - Cards, but these information is not finding its way to KODI.

Is there someone facing the same issue? Are there any possible actions to get back the audio? Thanks a lot for your help!