Posts by uomoint

uomoint · s905 and s912 Leia builds uomoint October 18, 2017 at 1:25 PM

Also in Leila Builds you have to run "echo '444,10bit' > /sys/class/amhdmitx/amhdmitx0/attr" for 10bit output?

uomoint · [8.2.3.1] LibreELEC 8.2 for S905/S905X uomoint September 16, 2017 at 8:15 PM

Quote from wrxtasy

I see the same behavior on my 10bit Hisense TV when switching to 4K as well - just have to calibrate the TV when in 4K mode.

Did you change ONLY saturation on you tv or can you suggest me others changes?

uomoint · [8.2.3.1] LibreELEC 8.2 for S905/S905X uomoint September 16, 2017 at 10:34 AM

Quote from 2re

Yes.

I've enabled 444 10bit but with 4k resolution GUI and also 10bit video (non HDR) are very oversaturated (RED is very strong). Why? I hav a 4k hisense tv with 10bit pannel (8bit+frc)

uomoint · [8.2.3.1] LibreELEC 8.2 for S905/S905X uomoint September 1, 2017 at 12:48 PM

Hi, I have a s905x amlogic tv box with dual boot (android + Libreelec 8.16).

Can I play 4k 10bit video in HDR Mode with Libreelec? I've tried and my tv switch to HDR mode.

Or is better through android os ? Thank You

uomoint · [8.2.3.1] LibreELEC 8.2 for S905/S905X uomoint August 7, 2017 at 9:16 PM

hello, I'm waiting for a s905x box. In order to see my 4k HDR 10bit video, I have only to insert this command line in autostart.sh ?

echo '444,10bit' > /sys/class/amhdmitx/amhdmitx0/attr

uomoint · [8.2.2.3] LibreELEC 8.2 for S912 uomoint August 7, 2017 at 4:35 PM

Quote from ChimeyJimmey
Well, create this autostart.sh, reboot, check if the setting is applied on boot:
Code
cat /sys/class/amhdmitx/amhdmitx0/attr
and test the UHD HDR 10bit playback.

How can I check in the setting is applied? thank you

uomoint · [8.2.2.3] LibreELEC 8.2 for S912 uomoint August 7, 2017 at 4:22 PM

Quote from ChimeyJimmey

That is from the media box part.

Do you have a TV/monitor, which supports YUV444, HDR and 10bit?

Yes I have a new 4k hisense tv with hdr

uomoint · [8.2.2.3] LibreELEC 8.2 for S912 uomoint August 7, 2017 at 4:13 PM

hello, I'm waiting for a s905x box. In order to see my 4k HDR 10bit video, I have only to insert this command line in autostart.sh ?

echo '444,10bit' > /sys/class/amhdmitx/amhdmitx0/attr

uomoint · 7.0.2.008 build for S905/S905X uomoint October 24, 2016 at 2:30 PM

I have a nexbox A95X (s905 1g ram 100mbit lan). I've installed the last devel build with gxbb_p200_1G_100M.dtb device tree on sd card and all is perfect except for remote. When I shut down the box, I can't power on with the remote. I can only unplug and replug power supply to power on the box. Remote during kodi use is perfect. Could anyone help me ?

uomoint · 7.0.2.007 build for S905 uomoint September 28, 2016 at 2:34 PM

Quote from kostaman

Very confusing boxes these.
I have the black box with no Beelink Written on it.
I believe this is what you have and it is not your fault that the name Beelink is used by some sellers.
The MiniMx is the 1GB / 8GB version.

Some people call this box MiniMx G being the 2GB / 16GB version.
I used the gxbb_p200_2G_1Gbit.dtb for the same box as you.
Please make sure you use the SD Card Install of LE and confirm everything works before installing to Nand.
If that is what you might do.

Display More

I don't received the box yet but this is the photo:

Thank You

uomoint · 7.0.2.007 build for S905 uomoint September 28, 2016 at 12:10 PM

Hello,

How device tree must I use to install libreelec on my Beelink MINI MX ver 1.0 2GB/16GB ? gxbb_p200_2G_beelink_minimxIII.dtb or gxbb_p200_2G_1Gbit.dtb ?

Thank You

uomoint · What s905 devices work without issues? uomoint September 28, 2016 at 11:59 AM

Quote from Pelican

MINI MX-G (MINI MX ver 1.0 2GB/16GB)

How device tree did you use for libreelec ? gxbb_p200_2G_beelink_minimxIII.dtb or gxbb_p200_2G_1Gbit.dtb ?

Thank You

uomoint · S905x support, what is needed? uomoint September 26, 2016 at 6:15 PM

Quote from kszaq

I don't know if the delay is present or where does it come from. You have to call the postal company which delivers my S905X box and tell them to hurry. [emoji14]

Which s905x box did you buy ? I'm waiting for a Mini M8S II and I'd like to try one of your libreelec version, as in my MX III Plus (s812) that works perfectly