The sources for the DTS build are in GIT ArmbianTV.
Thank you. I will look into this.
Posts by shieldee
-
-
Hi,
I'm trying to make LibreELEC-RK3399.arm-11.0.0-rock960.img.gz work on Rock 960 board. It doesn't go past the uboot.
Version 10 works just fine.Did anyone had any luck with it?
Here is the output from the u-boot over serial console:
Code
Display MoreDDR Version 1.09 20171117 In Channel 0: LPDDR3, 800MHz CS = 0 MR0=0x58 MR1=0x58 MR2=0x58 MR3=0x58 MR4=0x3 MR5=0x1 MR6=0x5 MR7=0x0 MR8=0x1F MR9=0x1F MR10=0x1F MR11=0x1F MR12=0x1F MR13=0x1F MR14=0x1F MR15=0x1F MR16=0x1F Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=32 Size=1024MB Channel 1: LPDDR3, 800MHz CS = 0 MR0=0x58 MR1=0x58 MR2=0x58 MR3=0x58 MR4=0x2 MR5=0x1 MR6=0x5 MR7=0x0 MR8=0x1F MR9=0x1F MR10=0x1F MR11=0x1F MR12=0x1F MR13=0x1F MR14=0x1F MR15=0x1F MR16=0x1F Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=32 Size=1024MB 256B stride ch 0 ddrconfig = 0x101, ddrsize = 0x20 ch 1 ddrconfig = 0x101, ddrsize = 0x20 pmugrf_os_reg[2] = 0x3280D280, stride = 0x9 OUT Boot1: 2017-06-09, version: 1.09 CPUId = 0x0 ChipType = 0x10, 1828 SdmmcInit=2 0 BootCapSize=100000 UserCapSize=14910MB FwPartOffset=2000 , 100000 SdmmcInit=0 0 BootCapSize=0 UserCapSize=14772MB FwPartOffset=2000 , 0 StorageInit ok = 144751 LoadTrustBL LoadTrustBL error:-1 LoadTrustBL No find bl30.bin Load uboot, ReadLba = 2000 Load OK, addr=0x200000, size=0x79874 RunBL31 0x10000 NOTICE: BL31: v1.3(debug):9f93abc NOTICE: BL31: Built : 10:18:20, Jul 27 2017 NOTICE: BL31: Rockchip release version: v1.1 INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3 INFO: plat_rockchip_pmu_init(1089): pd status 3e INFO: BL31: Initializing runtime services INFO: BL31: Initializing BL32 INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-106-g2d5da6a #1 Fri Oct 20 01:35:40 UTC 2017 aarch64) INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.1 INF [0x0] TEE-CORE:init_teecore:83: teecore inits done INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x200000 INFO: SPSR = 0x3c9 U-Boot 2014.10-RK3399-06-02588-gfa81fe4-dirty (May 22 2018 - 11:16:21) CPU: rk3399 cpu version = 0 CPU's clock information: aplll = 816000000HZ apllb = 24000000HZ gpll = 800000000HZ aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ aclk_periph_l0 = 100000000HZ, hclk_periph_l0 = 100000000HZ, pclk_periph_l0 = 50000000HZ hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ cpll = 800000000HZ dpll = 800000000HZ vpll = 24000000HZ npll = 24000000HZ ppll = 676000000HZ Board: Rockchip platform Board Uboot as second level loader DRAM: Found dram banks: 1 Adding bank:0000000000200000(000000007fe00000) Reserve memory for trust os. dram reserve bank: base = 0x08400000, size = 0x01200000 128 MiB SdmmcInit = 0 0 SDCard Update. storage init OK! Using default environment GetParam W: Invalid Parameter's tag (0xFFFFFFFF)! Invalid parameter remotectl v0.1 pwm freq=0xb8320 pwm_freq_nstime=0x52d No pmic detect. CPU's clock information: aplll = 816000000HZ apllb = 24000000HZ gpll = 800000000HZ aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ aclk_periph_l0 = 100000000HZ, hclk_periph_l0 = 100000000HZ, pclk_periph_l0 = 50000000HZ hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ cpll = 800000000HZ dpll = 800000000HZ vpll = 24000000HZ npll = 24000000HZ ppll = 676000000HZ SecureBootEn = 0, SecureBootLock = 0 #Boot ver: 0000-00-00#0.00 empty serial no. normal boot. no fuel gauge found no fuel gauge found read logo on state from dts [0] no fuel gauge found 'recovery' does not seem to be a partition nor an address Unable to boot:recovery try to start backup 'backup' does not seem to be a partition nor an address Unable to boot:backup try to start rockusbCode -
Would you be kind enough to share the source repository, so that I can build the dts myself?
-
Thanks for the response. Unfortunately, bitbucket is not something you can search easily.
Thanks for the heads-up. I think that it would be manageable to fix the DTB.
Hopefully I'll get a hold of the URL and try my luck
-
Hi,
Thank you very much for the image.
I'm starting to tinker with my station-p2 and rock-3a boards.
For start, I'm trying to run it on rock-3a. When using the firefly DTB the image boots and works fine. All except the ethernet port. When changing the DTB to rock-3a, the system doesn't boot at all. Attached is the u-boot and Linux boot output.
Can you help me with this?
I wanted to try and fix the issue myself. Tried checking out the source code at https://github.com/150balbes/LibreELEC.tv, but it looks like that this is an older repository. I've checked the official libreelec repositories as well and I can't seem to be able to find it.
Can you please share the repository with the source code as well? I'd link to get my hands dirty and try to help.
Code
Display Moreappend: boot=LABEL=LIBREELEC disk=LABEL=STORAGE quiet console=ttyS2,1500000 console=tty0 systemd.debug_shell=ttyS2 coherent_pool=2M cec.debounce_ms=5000 Retrieving file: /dtb/rockchip/rk3568-rock-3a.dtb reading /dtb/roc kchip/rk3568-rock-3a.dtb 116665 bytes read in 14 ms (7.9 MiB/s) Fdt Ramdisk skip relocation ## Flattened Device Tree blob at 0x0a100000 Booting using the fdt blob at 0x0a100000 Using Device Tree in place at 000000000a100000, end 000000000a11f7b8 can't found rockchip,drm-logo, use rockchip,fb-logo WARNING: could not set reg FDT_ERR_BADOFFSET. failed to reserve fb-loader-logo memory Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000) Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000) Adding bank: 0x1f0000000 - 0x200000000 (size: 0x10000000) Total: 15261.660 ms Starting kernel ... [ 3.007234] arm-scmi firmware:scmi: Failed. SCMI protocol 22 not active. [ 3.071226] rk_gmac-dwmac fe010000.ethernet: no regulator found [ 3.071800] rk_gmac-dwmac fe010000.ethernet: Can not read property: tx_delay. [ 3.072492] rk_gmac-dwmac fe010000.ethernet: set tx_delay to 0x30 [ 3.073054] rk_gmac-dwmac fe010000.ethernet: Can not read property: rx_delay. [ 3.073695] rk_gmac-dwmac fe010000.ethernet: set rx_delay to 0x10 [ 3.081220] mdio_bus stmmac-0: MDIO device at address 0 is missing. [ 3.123442] clk: failed to reparent i2s1_mclkout_tx to clk_i2s1_8ch_tx: -22 [ 3.171725] clk: failed to reparent i2s1_mclkout_tx to clk_i2s1_8ch_tx: -22 [ 3.290673] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active. [ 3.371473] mmc0: tuning execution failed: -5 [ 3.371873] mmc0: error -5 whilst initialising SD card [ 3.527567] mmc0: tuning execution failed: -5 [ 3.527996] mmc0: error -5 whilst initialising SD card [ 4.472890] rockchip-dw-pcie 3c0000000.pcie: Phy link never came up [ 4.490269] pcieport 0000:00:00.0: of_irq_parse_pci: failed with rc=-22
