http://libreelec.dtech.hu/_TEST_/kszaq-a…-8.2.3.1.img.gz
Are you looking for this image?
The dtbs are available here:
http://libreelec.dtech.hu/device_trees/
However, kszaq's LE repo is no longer available.
1.Yes, when i press on it,nothing happend.
2.Does open trees.
Download links for LibreELEC 8.2.3.1 are dead.
Is it still avaible for download?
MXQ(5G) -> It is not an exact type, just a fancy name. However, I cannot recommend a dtb without the correct specification.
By the way, there are actually some of these that do not even contain an Amlogic SoC. (e.g. Rockchip RK3229)
You should somehow find out what it contains and how much RAM is in the box.
I have bigger problem now.
I made contact with reseller, they said that MXQ 4K 5G have Allwinner H313 chipset.
Is there any hope for libreelec or i should send back this product(and look for amlogic = X96mini, de X96Max of de X96 x4)?
Is it possible to know the exact type? Unfortunately, the MXQ is a bit short. (The original MXQ is just an S805 box.)
TNX 4 responce....
Yeah,the original MXQ(5G)...only do not know what version Amlogic or else.
Have reset button but will not get into dual boot.
Evry time boot into normal no metter how long reset button is pressed.
WeTek images do not need aml_autoscript, but standard images need it. However, this only runs if you use the toothpick method:
The toothpick method only needs to be run once, but it is an important step because it sets a bunch of uboot variables, which are needed to boot LibreELEC from SD card or USB (and if it can't find them, it will boot from eMMC/NAND automatically). However, the aml_autoscript of LE8 and LE9 are not compatible with each other, so if LE8 was installed earlier, this may be the reason why LE9.2 does not start. But the toothpick method will solve this problem.
WeTek devices do this whole method differently: Power button -> whereToBootFrom uboot variable. This is one of the main reasons that WeTek images are really only for WeTek devices.
TNX 4 answer.
I dont have(anymore) reset buton.
First,long time ago did,now i opened the box and there is no reset buton.
Where it should be is a cean spot.
Now i dont know did it had reset or not.
Or did i broke it.
MXQ just arived...
Except Libreelec image, do i need to copy "tree" dtb to?
Display MoreYou should try a downgrade to v9.2.8.5. If the error was really caused by the update, then the error should disappear with the older image.
I would suggest a different combination, and preferably use a WeTek image only for WeTek devices.
Recommended image: MXQ-4K-Pro_2G, dtb: gxbb_p200_2G_1Gbit.dtb.I can't provide a remote control configuration until I see what kind of remote control it came with from the factory. Can you send a photo?
Edit:
Do you have this device? -> https://www.gearbest.com/tv-box-mini-pc/pp_555824.html
Something went wrong...i`m not able to boot into libreelec any more from sd card.
I ordered MXQ, will know soon more about it.
If it is different from the picture below, I would like to ask you for it.
But, if it matches, it's unnecessary. I have never met this type before.
It is the one!
Only thing is, what file did i use it to get it work.
Let u know tommorow about option 2.
Wait a sec... What you marked with 1. doesn't affect you, only the part of my previous post after 1234LP concerns you.
If you really have the box under the link, with the same remote control, then I can't recommend a remote.conf, because I don't know this remote control.
Ok. i will proceed with advice numm. 2.
Just to let you know, eariler i used libreelec with some image.
Do not remember which version but it did work out of box or with some file change.
It was about 2 years ago.Not so long ago some file corrupted on sd card.
So here i am again.
Do i need to take a photo of remote?
Display More1. You should try a downgrade to v9.2.8.5. If the error was really caused by the update, then the error should disappear with the older image.
2. I would suggest a different combination, and preferably use a WeTek image only for WeTek devices.
Recommended image: MXQ-4K-Pro_2G, dtb: gxbb_p200_2G_1Gbit.dtb.I can't provide a remote control configuration until I see what kind of remote control it came with from the factory. Can you send a photo?
Edit:
3. Do you have this device? -> https://www.gearbest.com/tv-box-mini-pc/pp_555824.html
1. If u can provide info where to look, gladly will do.
2. I'll try
3. Exactly that device !!!
What is your advice ?!
Greetings,
Do not know is a appropriate to put a question here...
Android box is: M8S-2 Amlogic s905h(gxbb)
LibreELEC-WeTek_Play_2.arm-9.2.8.6.img
Is working very well.
Only what not working is remote control.
At this moment i'm using a mouse.
Which .dtb file i must to replace from libreelec map?
Or is there some earlier version of WeTek?
