Posts by crotale

  • LE13, 12, 11, 10 - NUC11 Audio lost until reboot [sample file]

    Quote from blueribb

    If your NUC11 has dual HDMI outputs, be sure to use #2.

    I had given up on the NUC11TNHi3 which I could not get a solid audio experience from. (No audio for DTS-MA, Atmos and similar. Attempting to play videos with those audio formats broke all audio until a reboot)

    A firmware update made it slightly better if I recall correctly from last year, I think it was version 0067.

    I tried now recently when I had time and saw that there was a bunch of new firmwares released.

    The latest as of now, 0074, did not solve it, but I remembered reading about trying different HDMI ports and using port #2 solved all my audio passthrough issues!

    Perhaps firmware 0074 didn't have anything to do with it, but it in combination with HDMI #2 on LibreElec 11.0.3 has worked with all I have tried so far.

  • HDR on x86 Hardware

    I'm scatter-brained... I just realized that my TV actually supports HDR! (Sony KD-55XF9005)

    I changed the image to "LibreELEC-Generic.x86_64-11.0-devel-20220807005106-45816fd" and sure enough, the TV itself reports a HDR movie as such. However, I have issues with DTS audio with this build aswell, but I will see if I can find another thread for that.

  • HDR on x86 Hardware

    Ok, I will check some other test files.

    You're right, I didn't realize this thread had a different goal, my bad! Need to get a HDR TV then ;)

  • HDR on x86 Hardware

    New log paste fixed. (http://sprunge.us/tUrPwY)

    Yes, I mentioned the NUC5 I had before the NUC11 just to say that the video+audio to the TV+AVR worked with the NUC5.

    I have checked the BIOS and I have not found a setting for a DSP setting. I have also tried removing the CEC-USB adapter and disabled all CEC in BIOS.

  • HDR on x86 Hardware

    I'm having some issues with build nightly-20220819-354884a running on a NUC11 (Tiger Lake). Video works well with the formats I have tried, but passthrough audio is not working.

    (

    Background:

    This setup has worked well before, but only running 1080p, running Kodi 18.x on Ubuntu 16.04:

    NUC5PPYH (Braswell) + PulseEight HDMI-CEC dongle <-> (hdmi ?) Sony KD-55XF9005 (hdmi ARC) <-> Onkyo TX-NR646

    HDMI-CEC works, audio passthrough works, etc

    So, the TV+AVR is tested to work in this way

    )

    Setup:
    NUC11TNHi3 (hdmi 1) <-> (hdmi ?) Sony KD-55XF9005 (hdmi ARC) <-> Onkyo TX-NR646

    Test scenarios:

    - Ubuntu 20.04.3 HWE (kernel 5.15) + Kodi 19.4: No audio and I didn't manage to sort out anything with regards to audio and/or audio passthrough...

    - LibreELEC 10.0.2 (kernel 5.10): Audio settings and passthrough channels are recognized and shown in the GUI (says HDMI #3 fwiw). Setting the passthrough and all formats enabled I get GUI sounds after reboot. No audio in any videos I tried, except for one video file at one time. After reading up, I understood that Tiger Lake is not supported on this kernel.

    LibreELEC nightly-20220819-354884a (kernel 5.19), upgraded from stable 10.0.2 above. No audio at any setting after the upgrade. Audio passthrough is different from the stable release above, now recognizing the TV at "DisplayPort #0". Still no audio after several reboots, but after I pressed "Revert all settings" under Audio and then doing some basic settings (enabling passthrough) it actually started working, both GUI sounds and passthrough. The AVR picked up the different formats aswell.

    However, after one movie the sound stopped working and after that it doesn't come back until a restart. I think it was at a DTS audio file. I'll try to narrow it down...

    Here's a log for now: (should work better than before.
    https://paste.ubuntu.com/p/fsv7hNrnVx/

  • HDR on x86 Hardware

    Quote from orby

    just tried with the ubuntu install currently on there and i can go from 4k60 to 1080p24 but won't then let me go to 4k24 only 4k60, it does list all the modes my TV can support though

    when i hit apply i loose signal and tv goes to the default 1080p60 no signal mode until it auto reverts back as not been able to confirm it


    hoping to have at least some logs and info from the box which might be able to help, i inititialy gave up as i couldn't compile my own kernal, but i am hoping these will be better than nothing

    nearly bedtime though so tomorrow's fun

    I'm running a NUC11TNHi3 connected to a Sony KD-55XF9005 and I can change refresh rate between 4k30p and 4k60p on the following OS/Kernels:

    Ubuntu 20.04.3 HWE (5.15)

    LibreELEC 10.0.2 (5.10)

    LibreELEC nightly-20220819-354884a (5.19)

    I have some sound errors though which I will post separately...