Yeah suspend wont work with usb ir, you probably can set it to suspend but won't be able to wake it since the usb port won't have power.
Can you wake from suspend anyway (even using the built-in IR receiver) without using the original remote's power key? It's not something I've ever tried.
Why not just Poweroff then? Do you get the same issue then?
Because I want to use suspend?
Because it's a test build and I'm reporting what happens when I test?
Take your pick, both are applicable.
Obviously you don't see those notifications on powering up or down.
Good stuff.
I'm going to need to do that too at some point, so one less thing to scratch my head about.
Hello,
i updated my LE 7.0.2 to 7.90.006 and my remote.xml doesn't work.
With LE 7.0.2 no problems, but now the number buttons doesn't work.
Code<MyVideoLibrary> <remote> <zero>Number0</zero> <one>Number1</one> <two>JumpSMS2</two> <three>JumpSMS3</three> <four>JumpSMS4</four> <five>JumpSMS5</five> <six>JumpSMS6</six> <seven>JumpSMS7</seven> <eight>JumpSMS8</eight> <nine>JumpSMS9</nine> </remote> </MyVideoLibrary>
I don't think that's a bug, the keymap categories have changed. Try swapping <Videos> for <MyVideoLibrary>.
Unmount/mount is expected at this point, that's how drivers work.
I realise that - just don't see that behaviour (the notifications) on my revo after sleep, and I don't remember (edit: not that that means much these days) seeing it on the Beelink previously.
No biggie.
Second test build today, changes over the previous one include a fix for WiFi reconnect on wakeup: 2016-09-25-devel-2
Beelink minimxiii - wifi's now re-connecting on wake-up. It'll be nice to use suspend again, thanks.
I'm still seeing the unmount / mount notifications on wakeup... is that a bug or expected?
Latest development build uploaded: 2016-09-25-develI may have fixed suspend in this one (for both Broadcom and Realtek WiFi). A fix was trivial yet I spend almost 3 days looking for it...
It looks good! Great work!
I used suspend / wake a few times on my minimxiii and everything seemed to carry on working.
The one oddity is that on wake I get a 'Successfully removed storage device' notification and then a few seconds later 'Mounted removable storage device' (I have a 5TB HDD attached).
Never seen those notifications before after waking, and I routinely suspend pc's and used to use suspend on the Beelink on older builds.
Edit: that'll teach me not to post in the middle of the night! Suspend works (with the caveat above) but the wifi is lost on waking up. I don't normally use wifi and had a brain fade last night.
Wifi shows as working in the libreelec config settings on wake, but it isn't. Refresh doesn't help but disconnect followed by connect does. If you want logs just specify what.
Your link's broken...
LibreELEC
Is it still working from sd card?
What instructions are you following?
If you're using krypton or a Millhouse build the video cache settings have changed, so you'll need to edit advancedsettings.xml:
Kodi Wiki
I have tried disabling CEC in Kodi, but that doesn't work. The ODROID is actually responding to IR signals from the TV remote anyway not through CEC. I have proved this by covering up the IR sensor on the ODROID.
That doesn't make sense.
If you've covered the odroid IR receiver and your tv remote is controlling kodi it must be via cec.
I've had a few occasions where I've copied files to a different sd card / usb stick and SSH hasn't worked until I deleted the contents of /storage/.cache/ssh.
You mean on a wireless access point you've set up?
If it's still the same as openelec (probably?) it's not possible to change the channel.
astep... I haven't got time to post properly, and I'm not at home so can't post it, but if you look through my posts you'll find a remote.conf fo a Pivos xios ds that I'm using with a Harmony. There should be enough buttons on that to keep you happy.
Thank you for the answer.
I kept trying to find a solution based on your findings, in google and in other forums but nothing came up. Do you know a way to disable the hotspot feature, in order the card to work normally?
Should be in libreelec settings > Network > wireless.
Make sure 'enable wireless acces point' isn't checked.
Thanks Troggy
I did try and use the instructions from that thread. I downloaded both the ROM and also the TWRP file that I renamed recovery.img. I put the recovery.img file on a formatted sd card and stuck it in my box....I pulled the power cord, then did toothpick and then whilst toothpick was pressed I put the power cable back in.......nothing happened other than my TV screen going black.
cheers
All I can really say is it took me a few goes to get the toothpick right - make sure you can feel the switch being pressed down / released.
Have you looked at the files in the Beelink forum as an alternative? There are how-to videos, a link to the usb burning tool, firmware downloads - and no TWRP.
It's hard to say why it's not working for you - because all I had to do was follow the instructions in the thread I linked to.
I would, but I don't know what you've tried and why it's not failed.
I linked to the thread I used...
Mini MXIII TWRP Backup of Stock Rom -
FreakTab.com
The first post in that thread has instructions for loading TWRP.
Are you using the TWRP from that thread?
If so have you renamed it to recovery.img and stuck it in the root of your sd card?
If so what happens when you unplug the box and try the toothpick?
trogggy
As I understand irexec can run some external programm. If it's true the script like this#! /bin/sh
if [ -z "$(pidof kodi.bin)" ]; then systemctl start kodi.service; else systemctl stop kodi.service; fishould work.
IMHO.
Reading your previous post I thought you'd managed to get irexec working - which surprised me.
If you manage to get it going I'd be very interested, but as I say I've had no success.
