I compared the factory dtb of the KI T2 and my version of the HD18Q, and there is no entry in the audio settings that would justify not having audio over HDMI. Also, in my version, the analog audio output and S/PDIF should work. So without the logs, I don’t really know what the problem might be.
I don't know what the problem was, but I formatted the sd card and redid the process and now it works. anyway thanks for the help overall.
Hello again, I'm the guy with the Acemax K1 TV BOX. I have managed to fix the issue with the remote controller, but unfortunately I ran into a different problem. I don't have an audio playback. I have plugged HDMI, by hardware everything is working fine. I also checked every single audio output that is available and still no solution. Do you have any suggestions?
Quote from the IMPORTANT NOTES - Please read them carefully before asking section of the first post:
So even if you replace it, the kernel will ignore it. I need a full dmesg log, because I didn't find any wrong value in your uenv.
I interpret your first description to mean that your box is currently bricked. Then it seems that this is not true.
Now the question is, which image and which remote config did you use?
I recommend to try HD18Q image with FF00-Mecool (conf+xml) from this: http://libreelec.dtech.hu/remote.conf/.
Okay, I downloaded the files you mentioned and they work perfectly. my dumbass was going for the FE01-MXQ one. Anyway thanks a lot for your help.
The LibreELEC image does not qualify as a ROM because it does not contain elements that standard ROMs. (eg. bootloader, recorery, etc.)
This is what you need to check:
https://chinagadgetsreviews.com/download-lates…tv-box-4-2.html
Yea my bad at calling it ROM. I boot from the SDCARD like everyone. The thing is that the remote isn't usable. I also inserted the remote.conf file in the files but nothing changed.
Okay, I just found out this forum and I downloaded the ROM and booted it up from the SD CARD, the point is that neither the remote controller nor the power button work, is there any way to fix it?
model: k1 quad-core android DVB
amlogic S805
