Display MoreI now have a build and DTB that work really well on my r329q v3.0 board... which I've bult an .img.gz image from.
I burned to SD and booting from SD everything is OK... I then burned my build to the NAND, and again everything is working fabulously.... left the box running overnight, no Kodi issues, nothing weird in dmesg and 12hours uptime, which is great.
Only 1 small issue when booting from NAND..... Librelec 10.x does not seem to recognise the onboard MMC/SD card slot, or any SD card plugged into the onboard slot... It looks to be defined in the device tree, but there is no /dev/mmcblk0 device created when an sd card is inserted.The kernel detects it , and creates the necessary device and mounts the partitions when I boot from SD with the same image and DTB.
Is this a u-boot thing rather than the linux kernel?
I've taken on board your comments, and I'll try lowering the voltages from my baseline. I'll take 0.025V off every step, to see if things remain stable..
Temperature is something I am aware of, the 1st thing I did when I was donated this box was to change the heatsink to one that's about 2x the size.. The temperature is generally in the 65-75 range... and occasionally will get up to 82.
Thanks for all the advice!
Barry
Hello. I'm new to the subject and I still have some doubts about installing firmware..
What is the procedure for installing this firmware on NAND without PC?
(I'm from Brazil and I'm using Google Translate.. sorry kk)
