Unless you want to intentionally break internal tuner support and connect superior USB Dual Tuner DVB's to the Play2.I can look at a standard 64bit media_build for the WeTek Hub. Now we have the 64bit memory allocation problem fixed. This would then be compatible with the official 64bit LibreELEC Hub builds, so users can flip between them easily if they wish.
You are not right. Internal tuner support is possible move to media_build to avoid build conflict. I already done it for KI Plus.
I have come across a slight problem after successfully following afl1 tutorials etc.On watching the satellite stations, I have noted that my video frame rate (if this is the best way to describe it?)seems incorrect when watching sport.
I have it set up via the tvheadend cas tab newcamd.
I seem to get the vision in "bursts", in that it goes from ordinary speed, to slow, to quick catch up, making sports viewing impossible, and too hard to watch.
Have any others suffered with this problem and know of any work around?
Thanks
I don't know nothing about my tutorial. Hardly to help you without knowing your actual setup. But anyway, for best result use hdmi connection, no dvi or analog.
In Player sttings -> Videos:
- Adjust display refresh rate : On start/stop
- Sync playback to display : off
- Allow hardware acceleration - amcodec: On
- Accelerate MPEG2: Always
- Accelerate MPEG$: Always
- Accelerate h264: Always
In System settings -> Display:
- Refresh rate: TV refresh rate in your country, in Europe 50 Hz
pvr.hts-4.0.6.zip is buggy. Use pvr.hts - 3.4.16.1 from LibreELEC repository.
Same issue in both pvr.hts. Sometimes kodi after buffering is unable starts playback. But pvr thinks it did. This status is permanent and switching channel doesn't help. Starting playback from other source (e.g. play movie from hd) fix this status. It must be bug in kodi or in pvr addon.
ISDB-T?? The demod wasn't only dvbc/tx/sx?
In k1/k2 is AVL6862, DVB-T2/C+DVB-S2 demodulator.
AVL6882 is same as AVL6862 + ISDB-T.
The xbox one controller works perfectly!!. Thank you very much. Have you ever thought to include emulationstation + retroarch?
Never!!!
Scan is work in dvb-t ?
Thnks for your work
Fixing scanning issue is next stage.
afl1, this dvb driver will work with wetek play 2 as well ? Or just k1/2 ?
This driver is only for k1/k2 (AVL6862+R848).
[hr]
Update in #1.
New internal dvb driver supporting DVB-Sx/Tx/C based on public sources for TBS-5520.
afl1 If have pushed a fix for the media_build warning that you don't like: Commits · kszaq/linux-amlogic-le · GitHub
THX
New internal dvb driver ready. All sources public! You can integrate it to your build.
I am preparing to publish it.
Has anyone been able to run an xbox one controller?
I'll include support for xbox one in next build.
afl1 the new build dvb -c work good but dvb - s no working thanks for your work ?
This is test build for dvb-c/dvb-t. As I noticed dvb-s is fixing still.
HI. I can not run a satellite TV. VDR scans transponders but it is not the channels. Can someone litter kodi backup or libreelec backup. Oscam everything is working properly installed according to instructions, but dvb-s2 does not work. Thank you for any help.
Use tvheadend42 + oscam.
[ 1853.594760@2] AVL: DVB-C NoSignal Channel! [ 1853.595087@2] AVL: mode:0 channel unlocked! [ 1853.595092@2] avl6862_read_status: avl6862_read_status: LOCK_STATUS=0x0 [ 1853.595366@2] AVL: avl6862_set_property: cmd:2 [ 1853.595386@2] AVL: avl6862_set_property: cmd:17 [ 1853.595391@2] avl6862_set_dvbmode: avl6862_set_dvbmode: delivery_system:1 [ 1853.595396@2] avl6862_set_dvbmode: avl6862_set_dvbmode: SYS_DVBC [ 1853.595401@2] AVL: avl6862_set_property: DELIVERY_SYSTEM: DVBC [ 1853.595729@2] AVL: avl6862_set_property: cmd:3 [ 1853.595734@2] AVL: avl6862_set_property: cmd:6 [ 1853.595739@2] AVL: avl6862_set_property: cmd:8 [ 1853.595744@2] AVL: avl6862_set_property: cmd:9 [ 1853.595749@2] AVL: avl6862_set_property: cmd:4 [ 1853.595753@2] AVL: avl6862_set_property: cmd:1 [ 1853.595773@3] avl6862_tune: avl6862_tune: retune [ 1853.595781@3] avl6862_set_frontend: avl6862_set_frontend: Del.sys:! [ 1853.595787@3] avl6862_i2c_gate_ctrl: avl6862_i2c_gate_ctrl: 1 [ 1853.595792@3] avl6862_i2c_gate_ctrl: avl6862_i2c_gate_ctrl: SYS_DVBC [ 1854.318386@3] avl6862_i2c_gate_ctrl: avl6862_i2c_gate_ctrl: 0 [ 1854.318434@3] avl6862_i2c_gate_ctrl: avl6862_i2c_gate_ctrl: SYS_DVBC [ 1854.358679@3] avl6862_set_dvbc: %[AVL_ChannelScan_C] ret = 0 Freq = 130 MHz, Bandwide = 7 MHz [ 1854.358728@3] i2c i2c-1: avl6862_set_frontend: set DVBC ok! ret = 0 [ 1854.359803@3] AVL: mode:0 channel unlocked! [ 1854.359825@3] avl6862_read_status: avl6862_read_status: LOCK_STATUS=0x0 [ 1854.361254@2] AVL: mode:0 channel unlocked! [ 1854.361282@2] avl6862_read_status: avl6862_read_status: LOCK_STATUS=0x0 [ 1854.462342@2] AVL: DVB-C NoSignal Channel!this is what i get when tuning to a dvb-c channel. It is the same with VDR and w_scan.
I prepared special build with new driver. I tested dvb-t and dvb-c successfully. Dvb-s still not working, work in progress to fix dvb-s.
LibreELEC-S905.arm-8.0-devel-7.95.beta5X-20170207093751.img.gz
Pls, test it and let me know.
[hr]
I install LibreELEC-Amlogic.aarch64-KI_Plus-7.0.2.004.4, this old version.
The dvb-s with oscam work with this version. Sadly usb dvb-t isnt support with this version. But when i restore tvheadend settings from wetek, i can use dvb-t too with oscam.I dont know why, but oscam+tvh work only with this old version together, but i cannot know the reason.
So something broke with bump to libreelec 8.
Pls make me favour and do clean installation:
LibreELEC-S905.arm-8.0-devel-7.95.beta5b-20170206161635.img.gz
service.tvheadend42-8.1.109.zippvr.hts.4.0.6.zip
service.softcam.oscam-8.1.103.zip
service.system.pcscd-addon-8.1.0.zip
and test for me pcscd-addon if card-reader is working.
Can't see the link for the last update beta5b.Sent from my Redmi Note 3 using Tapatalk
You are probably blind!
Go to first post in this thread.
[ 1853.594760@2] AVL: DVB-C NoSignal Channel! [ 1853.595087@2] AVL: mode:0 channel unlocked! [ 1853.595092@2] avl6862_read_status: avl6862_read_status: LOCK_STATUS=0x0 [ 1853.595366@2] AVL: avl6862_set_property: cmd:2 [ 1853.595386@2] AVL: avl6862_set_property: cmd:17 [ 1853.595391@2] avl6862_set_dvbmode: avl6862_set_dvbmode: delivery_system:1 [ 1853.595396@2] avl6862_set_dvbmode: avl6862_set_dvbmode: SYS_DVBC [ 1853.595401@2] AVL: avl6862_set_property: DELIVERY_SYSTEM: DVBC [ 1853.595729@2] AVL: avl6862_set_property: cmd:3 [ 1853.595734@2] AVL: avl6862_set_property: cmd:6 [ 1853.595739@2] AVL: avl6862_set_property: cmd:8 [ 1853.595744@2] AVL: avl6862_set_property: cmd:9 [ 1853.595749@2] AVL: avl6862_set_property: cmd:4 [ 1853.595753@2] AVL: avl6862_set_property: cmd:1 [ 1853.595773@3] avl6862_tune: avl6862_tune: retune [ 1853.595781@3] avl6862_set_frontend: avl6862_set_frontend: Del.sys:! [ 1853.595787@3] avl6862_i2c_gate_ctrl: avl6862_i2c_gate_ctrl: 1 [ 1853.595792@3] avl6862_i2c_gate_ctrl: avl6862_i2c_gate_ctrl: SYS_DVBC [ 1854.318386@3] avl6862_i2c_gate_ctrl: avl6862_i2c_gate_ctrl: 0 [ 1854.318434@3] avl6862_i2c_gate_ctrl: avl6862_i2c_gate_ctrl: SYS_DVBC [ 1854.358679@3] avl6862_set_dvbc: %[AVL_ChannelScan_C] ret = 0 Freq = 130 MHz, Bandwide = 7 MHz [ 1854.358728@3] i2c i2c-1: avl6862_set_frontend: set DVBC ok! ret = 0 [ 1854.359803@3] AVL: mode:0 channel unlocked! [ 1854.359825@3] avl6862_read_status: avl6862_read_status: LOCK_STATUS=0x0 [ 1854.361254@2] AVL: mode:0 channel unlocked! [ 1854.361282@2] avl6862_read_status: avl6862_read_status: LOCK_STATUS=0x0 [ 1854.462342@2] AVL: DVB-C NoSignal Channel!this is what i get when tuning to a dvb-c channel. It is the same with VDR and w_scan.
THX. I see there is a issue with tuning DVB-C channels.
[hr]
Update version 7.95.beta5b in #1.
There is playback fix by removed waiting for a key frame in Amlogic decoder. Probably will fix channel switching issue.In my short testing channel switching looks reliable now. - issue still persist.
VDR is working again with your new version (2017-02-05), thanks a lot!dvb-c is not working with VDR, i get the following messages:
CodeFeb 06 12:28:28 k1plus vdr[3748]: [3788] frontend 0/0 timed out while tuning to channel 47 (Disney SD), tp 450 Feb 06 12:28:28 k1plus kernel: i2c i2c-1: avl6862_set_frontend: set DVBC ok! ret = 0 Feb 06 12:28:38 k1plus kernel: i2c i2c-1: avl6862_set_frontend: set DVBC ok! ret = 0 Feb 06 12:28:40 k1plus kernel: i2c i2c-1: avl6862_set_frontend: set DVBC ok! ret = 0 Feb 06 12:28:49 k1plus vdr[3748]: [3788] frontend 0/0 timed out while tuning to channel 202 (CNBC), tp 458 Feb 06 12:28:49 k1plus kernel: i2c i2c-1: avl6862_set_frontend: set DVBC ok! ret = 0 Feb 06 12:28:59 k1plus kernel: i2c i2c-1: avl6862_set_frontend: set DVBC ok! ret = 0 Feb 06 12:29:01 k1plus kernel: i2c i2c-1: avl6862_set_frontend: set DVBC ok! ret = 0
How can i debug this further?
if i understood you correctly, this is now the current version of the linux media_build driver? So the driver is open source now?
To debug driver from ssh use following commands:
echo 1 > /sys/module/avl6862/parameters/debug_avl
while true; do dmesg -c ; sleep 1; done
My tuner isn't working in the latest version, I know some tuners aren't working I'm just showing which one it is.2017-02-05 08:05:53.000 linuxdvb: Silicon Labs Si2168 : DVB-T #0 - DTV_CLEAR failed [e=Inappropriate ioctl for device]
It's an August T210 that uses Geniatech T230 drivers Geniatech T230 - LinuxTVWiki
I've got same issue with latest build:
2017-02-06 13:13:46.692 mpegts: 658MHz in dvbt - tuning on Realtek RTL2832 (DVB-T) : DVB-T #0
2017-02-06 13:13:46.693 linuxdvb: Realtek RTL2832 (DVB-T) : DVB-T #0 - DTV_CLEAR failed [e=Inappropriate ioctl for device]
2017-02-06 13:13:46.693 mpegts: 522MHz in dvbt - tuning on Realtek RTL2832 (DVB-T) : DVB-T #0
2017-02-06 13:13:46.693 linuxdvb: Realtek RTL2832 (DVB-T) : DVB-T #0 - DTV_CLEAR failed [e=Inappropriate ioctl for device]
2017-02-06 13:13:46.693 mpegts: 754MHz in dvbt - tuning on Realtek RTL2832 (DVB-T) : DVB-T #0
2017-02-06 13:13:46.693 linuxdvb: Realtek RTL2832 (DVB-T) : DVB-T #0 - DTV_CLEAR failed [e=Inappropriate ioctl for device]
but I can with w_scan scan channels:
##############################################
# LibreELEC #
# http://libreelec.tv #
##############################################
LibreELEC (community) Version: 7.95.beta5
LibreELEC git: 9a197f4ea5fcba5fa939f950fd5fa93f075e1b59
LibreELEC:~ # systemctl stop service.tvheadend42.service
LibreELEC:~ # /storage/w_scan -!v -ft
/storage/w_scan -!v -ft
w_scan version 20161022 (compiled for DVB API 5.10)
WARNING: could not guess your country. Falling back to 'DE'
guessing country 'DE', use -c <country> to override
using settings for GERMANY
DVB aerial
DVB-T Europe
scan type TERRESTRIAL, channellist 4
output format vdr-2.0
WARNING: could not guess your codepage. Falling back to 'UTF-8'
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
check Realtek RTL2832 (DVB-T):
DVB-T
/dev/dvb/adapter0/frontend0 -> TERRESTRIAL "Realtek RTL2832 (DVB-T)": good :-)
Using TERRESTRIAL frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.10
frontend 'Realtek RTL2832 (DVB-T)' supports
INVERSION_AUTO
QAM_AUTO
TRANSMISSION_MODE_AUTO
GUARD_INTERVAL_AUTO
HIERARCHY_AUTO
FEC_AUTO
BANDWIDTH_AUTO not supported, trying 6/7/8 MHz.
FREQ (174.00MHz ... 862.00MHz)
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
check Realtek RTL2832 (DVB-T):
DVB-T
Scanning DVB-T...
Scanning 8MHz frequencies...
474000: (time: 00:00.810)
482000: (time: 00:03.030)
490000: (time: 00:05.160)
498000: (time: 00:07.290)
506000: (time: 00:09.420)
514000: (time: 00:11.550)
(0.900sec): SC (0x7)
(0.900sec) signal
522000: (time: 00:12.510)
(0.880sec): SC (0x7)
(0.880sec) signal
(0.950sec): SCL (0x1F)
(0.950sec) lock
signal ok: QAM_AUTO f = 522000 kHz I999B8C999D999T999G999Y999 (0:0:0)
initial PAT lookup..
read_sections: count2: 32
PAT for transport_stream_id 259 (0x0103)
PAT (xxxx:xxxx:259)
===================== parse_pat ========================================
len = 20
0x00: 00 00 E0 10 0B B9 EC 1D 0B BA EC 81 0B BB EC E5 :
0x10: 0B BC ED 49 : I
========================================================================
QAM_AUTO f = 522000 kHz I999B8C999D999T999G999Y999 (0:0:0) : updating transport_stream_id: -> (0:0:259)
check_duplicate_transponders()
================= list_transponders() =======================
new_transponders(000): QAM_AUTO f = 522000 kHz I999B8C999D999T999G999Y999 (0:0:259)
=============================================================
initial NIT lookup..
read_sections: count2: 59
NIT(act): (xxxx:12290:xxxx)
===================== parse_nit ========================================
len = 47
0x00: F0 0A 40 08 54 6F 77 65 72 63 6F 6D F0 21 01 03 : @ Towercom !
0x10: 22 BF F0 1B 41 0C 0B B9 01 0B BA 01 0B BB 01 0B : " A
0x20: BC 01 5A 0B 04 7E 83 40 1F 81 1A FF FF FF FF : Z ~ @
========================================================================
QAM_AUTO f = 522000 kHz I999B8C999D999T999G999Y999 (0:0:259) : updating network_id -> (0:12290:259)
check_duplicate_transponders()
================= list_transponders() =======================
new_transponders(000): QAM_AUTO f = 522000 kHz I999B8C999D999T999G999Y999 (0:12290:259)
=============================================================
----------------------------------------------------------
NIT(act): (8895:12290:259)
===================== parse_terrestrial_delivery_system_descriptor =====
len = 11
0x00: 04 7E 83 40 1F 81 1A FF FF FF FF : ~ @
========================================================================
F754000 B8 M64 C23 D999 G4 T8 other_frequency=0 (0)
0 cells
find_transponder(8895:12290:259): -> not found.
find_transponder_by_freq(QAM_64 f = 754000 kHz I999B8C23D0T8G4Y0 (8895:12290:259)) -> not found.
find_transponder_by_freq(QAM_64 f = 754000 kHz I999B8C23D0T8G4Y0 (8895:12290:259)) -> not found.
new transponder: (QAM_64 f = 754000 kHz I999B8C23D0T8G4Y0 (8895:12290:259)) 0x405A
check_duplicate_transponders()
DELETING DUPLICATE TRANSPONDER new_transponders(001): QAM_64 f = 754000 kHz I999B8C23D0T8G4Y0 (8895:12290:259) (line:611)
================= list_transponders() =======================
new_transponders(000): QAM_64 f = 754000 kHz I999B8C23D0T8G4Y0 (8895:12290:259)
=============================================================
530000: (time: 00:16.800) ^C
ERROR: interrupted by SIGINT, dumping partial result...
(time: 00:17.990) dumping lists (0 services)
..
Done, scan time: 00:17.990
LibreELEC:~ #To fix this problem, use my build from :[7.95.beta5] LibreELEC 8.0 builds for KI Plus / KII Pro
If is same as kszaq's only adding support for internal dvb tuner. Also install tvheadend42 + pvr.hts from this post.
kszaq: I have two differences in my build:
1. Amlogic I2C support is necessary for internal dvb driver;
2. I had issue with patches to compile latest media_build. To fix it I temporary deleted media_build-02-add-to-backports.patch
Tvheadend HTSP Client 3.4.16.1 (installed from LE repository) do not work with fixed version service.tvheadend42-8.1.109.zip -> error message: Acces denied
and do not work with downloadable version from LE repository (same error message)It was also the same as the previous fixed version tvheadend42 (.108)
However service.tvheadend42-8.1.107.zip and pvr.hts-3.4.12.zip work very well
New version pvr.hts-4.0.6.zip in first post.
[hr]
Do I have to do anything more to make this work DVB-C on Kii besides including dtb.img for kii??? I had just tested it on dvb-c network with tvheadend working version indicated on the post from that zip file.
For testing you need only latest LibreELEC version (7.95.beta5). In tvheadend you have to create dvb-c mux best matching to your dvb-c provider and attach it to to dvb-c adapter. For testing disable all other avl6862 adapters or link them to dvb-c adapter. I only made blind copy of DVB-C support from TBS5520 (avl6882+r848) without any testing. Pls report testing results and attach log from tvheadend. Also run from ssh console w_scan. Copy attached version to /storage and submit following commands:
chmod 0755 /storage/w_scan
systemctl stop service.tvheadend42.service
/storage/w_scan -!v -fc
In w_scan you can specify country -cAT for Austria, default is DE.
You will get something like this:
LibreELEC:~ # chmod 0755 /storage/w_scan
LibreELEC:~ # systemctl stop service.tvheadend42.service
LibreELEC:~ # ./w_scan -!v -fc -cAT
./w_scan -!v -fc -cAT
w_scan version 20161022 (compiled for DVB API 5.10)
using settings for AUSTRIA
DVB cable
DVB-C
scan type CABLE, channellist 7
output format vdr-2.0
WARNING: could not guess your codepage. Falling back to 'UTF-8'
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
check Availink AVL6862:
DVB-C ann.B
DVB-C ann.A
DVB-T2
DVB-T
DVB-S2
DVB-S
/dev/dvb/adapter0/frontend0 -> CABLE "Availink AVL6862": very good :-))
Using CABLE frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.10
frontend 'Availink AVL6862' supports
INVERSION_AUTO
QAM_AUTO
FEC_AUTO
FREQ (47.00MHz ... 862.00MHz)
SRATE (1.000MSym/s ... 45.000MSym/s)
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
check Availink AVL6862:
DVB-C ann.B
DVB-C ann.A
DVB-T2
DVB-T
DVB-S2
DVB-S
73000: sr6900 (time: 00:00.020)
(0.760sec): S (0x1)
(0.760sec) signalsr6875 (time: 00:03.830)
(0.760sec): S (0x1)
(0.760sec) signal
81000: sr6900 (time: 00:07.640)
(0.770sec): S (0x1)
(0.770sec) signalsr6875 (time: 00:11.460)
(0.760sec): S (0x1)
(0.760sec) signal^C
ERROR: interrupted by SIGINT, dumping partial result...
(time: 00:14.700) dumping lists (0 services)
..
Done, scan time: 00:14.700
LibreELEC:~ #
afl1 as usual, thanks for the update.
this sentence still relevant?
- Latest addon service Tvheadend42 is broken. Install fixed version service.tvheadend42-8.1.109.zip and disable auto-update.
Yes.
P.S.
My release is based on kszaq's 7.95.beta5 only adding internal driver as a loadable module. You can run my kerrnel.img with kszaq's SYSTEM and v/v with only one constraining, loosing support for internal dvb driver.