hey.... effectively that configuration is correct 
the problem i using myDynDNS in LE wireguard .config file... using <myDynDNS> registered in dyndns.it handshake doesn't works, but if i use the really IP address, handshake is correct and VPN goes UP ...
i tried using both configurations in LE .. DHCP and StaticIP with google DNS.. but is the same
nslookup show my correct IP... but MyDDNS works only in Android Client and not in LE ... 
any idea ?
it works here
thank's anyway...
Last update...
i tried with the same Keys of Android device, using same IP too... and the result is always the same 
no handshake....
i'm thinking about something missing or wrong in my LibreEL PI 2 B ...
is there something i can check or verify on LE configurations ? ... sw ? config ? network ? ... iptables are disabled...
or maybe something on openWRT ? ... something that works with Android and not with LE...
i really don't know what to look for...
thaks for your patience..
Hi man... thank's for the suggestion but nothing is changed ...
theese are the steps following your suggestion..
i generated new keys in OpenWRT server (wg genkey | tee wgclient.key | wg pubkey > wgclient.pub) ... i changed the peer's Public on server using new .pub , i used new private key in .config on LibreELEC client
changed "WireGuard VPN Tunnel" with a one-word and WireGuard.Address = the same IP /24 , leaving peer on server always IP/32 (i also tried IP /24 )
after modify i rebooted LibreELEC and restarted Wg adapter on router
what else . i don't know...
OpenWRT Firewall accept WG UDP port from WAN (of course... otherwise Android wouldn't even work.. 
)
i've no idea what else to try...
hi to all, i'm Paolo...
i did a lot of research and tests, i generally like to find solutions by myself ... but i don't know what else to try so i'm asking your help...
i'm trying to configure WG Client on raspbery PI 2 using LibreELEC 9.2.8 to connect to an OpenWRT router... i think i've done all the configurations required but it doesn't work...
connmanctl services show me the VPN i've configured... "WireGuard VPN Tunnel vpn_<my selected name>"
the config file seems to be correct...
[provider_wireguard]
Type = WireGuard
Name = WireGuard VPN Tunnel
Host = <OpenWRT ddns ip>
WireGuard.Address = <my Client internal IP>/32
WireGuard.PrivateKey = <client generated Private KEY>
WireGuard.PublicKey = <OpenWRT Server Public KEY>
WireGuard.DNS = 8.8.8.8, 1.1.1.1
WireGuard.AllowedIPs = 0.0.0.0/0
WireGuard.EndpointPort = WG Server Listening port
WireGuard.PersistentKeepalive = 25
on OpenWRT router i've configured the Peer with <my Client internal IP>/32 and Public Client KEY...
when i use connmanctl connect vpn_<my selected name> it goes UP and on OpenWRT Wireguard Status i see some Tx and RX bytes but Last Handshakes reports "never"...
this is what on OpenWRT
this is my LibreELEC...
i'm sure.. keys are corrects .. possible are they wrong ?
Wireguard server on OpenWRT works correctly... i've tested using the same source connection (other modem) ... using my android phone in wifi connected works.. using LibreELEC Kodi wired connection it does'n work..
thank's to all
