Posts by billyme

Quote from vindio74

Hi, from my experience with my Minix X7 you can flash the img prepared by balbes 150 that I shared last Nov' 24th in an SD card. Native wifi and ethernet are not working, so you will need a wifi dongle for network connection. None of the later images shared for rk3188 boot in my system.

Regards

I manage to extract the boot.img from the original firmware of my box will this help to build a new libreelec compatible?

I manage to install and update LE for my old rk3188 tv box. its booting and i get a picture but after a while the screen goes black but the tv gets a singal (I dont get the message no signal) and i can see that the resolution is 1092x1080. Even when the screen is black I still have access via ssh. I tried to change some settings in the extlinux.conf in the video=HDMI-A-1:e with no luck. Any help for me?

Quote from balbes150

Sorry, I don't have such a model, I don't know what's wrong there.

Thanx for the response. If i change the extlinux.conf (video=HDMI-A-1:1024x768@60) to something else will this help?

Quote from vindio74

I hope I'm not breaking any forum rules...

https://drive.google.com/file/d/1JwSMMi…iew?usp=sharing

vindio74 i used the file above for my cs968 (rk3188) and everything works fine but after a while i loss the picture from the hdmi. Is there anything i can do about it? Maybe a change in extlinux.conf ? balbes150 can you help?

Quote from havhav

Code

Do you use 1080p 60hz resolution or lower? With the first it should work without problem

Yes this is the one im using… after a while the screen goes black

No since this happening when im using it actively. If I change the dtb to the cs968 i dont get picture at all. If i use the ugoos which is the default one i get picture as i described. Any thoughts?

Quote from havhav

I have tried this version on Minix Neo x7 (RK3188) and it works (the current ones in yandex are not). The ethernet card does not work, nor the internal wifi, I had to use a wifi usb. I leave here the dmesg in case it helps to support it: http://ix.io/3GeV

I have created a remote to be able to use the one that came with the tv box (I attach it).

Some facts about ethernet:

[ 1.336009] rockchip_emac 10204000.ethernet: ARC EMAC detected with id: 0x7fd02

[ 1.336017] rockchip_emac 10204000.ethernet: IRQ is 37

[ 1.336054] rockchip_emac 10204000.ethernet: MAC address is now 56:f5:ff:64:71:6a

[ 1.468098] rockchip_emac 10204000.ethernet: connected to Generic PHY phy with id 0xe000

[ 11.538234] rockchip-pinctrl pinctrl: pin gpio3-23 already requested by 10204000.ethernet; cannot claim for serial0-0

[ 14.641581] rockchip_emac 10204000.ethernet eth0: Link is Down

Display More

I tried it on my cs968 I get hdmi and ethernet working but after a while the screen from hdmi goes black but I have access via ssh. If I restart i have hdmi output for a while. an thoughts?

I have cs968 rk3188 is there a way to install it on that box?