Posts by 0987363

Quote from smp

Try this build

Hi

I upgraded from 06.18 to this version, kodi is normal, no panic, but still the same problem.

Quote

I tested at NUC11PAHI5 with LG OLED65BX.

If i turn on the nuc11 first, and then turn on the TV, it recognizes 4k+120hz and plays hdr video normally.

But if i turn on the TV first and then the nuc11, it can only recognize 4k+60hz, and hdr video playback black screen.

For example, when the TV is on, and restart the nuc11, this issue will occur.

Quote from smp

0987363

Try this build. I patched the intel driver so it would ignore HDMI hot plug events. This fixed an odd issue that I reported here. (This build will boot only on Tiger Lake and newer hardware e.g. NUC11).

Hi

NUC11PAHI5

I upgraded from 06.18 to 06.27, but again the same problem, still black screen, forced power off and restart all the time black screen, no access to kodi interface.

I found panic in dmesg

Quote

[ 17.574753] ------------[ cut here ]------------

[ 17.574755] WARNING: CPU: 0 PID: 922 at net/ipv4/inet_connection_sock.c:525 inet_csk_get_port+0x52b/0x6d0

[ 17.574763] Modules linked in: 8021q snd_hda_codec_hdmi ir_nec_decoder snd_hda_codec_realtek snd_hda_codec_generic bnep ledtrig_audio intel_rapl_msr iwlmvm intel_rapl_common snd_hda_intel mac80211 wl(PO) intel_powerclamp snd_hda_codec snd_hda_core libarc4 x86_pkg_temp_thermal snd_intel_dspcfg snd_hwdep idma64 iwlwifi btusb btrtl btbcm btintel btmtk bluetooth cfg80211 rfkill ir_rc6_decoder ecdh_generic ecc rc_rc6_mce ite_cir pkcs8_key_parser fuse

[ 17.574783] CPU: 0 PID: 922 Comm: kodi.bin Tainted: P O 5.19.0-rc2 #1

[ 17.574785] Hardware name: Intel(R) Client Systems NUC11PAHi5/NUC11PABi5, BIOS PATGL357.0041.2021.0811.1505 08/11/2021

[ 17.574786] RIP: 0010:inet_csk_get_port+0x52b/0x6d0

[ 17.574789] Code: 9c 48 8b 78 28 e8 15 ba ff ff 48 89 45 a0 48 85 c0 0f 84 14 01 00 00 44 0f b6 55 9c 45 89 ec 41 bf 01 00 00 00 e9 60 fe ff ff <0f> 0b e9 99 fe ff ff 0f 0b e9 7f fe ff ff 39 43 10 0f 85 97 fc ff

[ 17.574790] RSP: 0018:ffffaa7b807bbdd0 EFLAGS: 00010206

[ 17.574791] RAX: ffff9cf3d9fdb500 RBX: 0000000000000000 RCX: 0000000000000001

[ 17.574792] RDX: 000000000000000a RSI: ffffffff825dcf10 RDI: ffffffff810cf958

[ 17.574793] RBP: ffffaa7b807bbe58 R08: 0000000000000001 R09: 0000000000000001

[ 17.574794] R10: ffff9cf3e88a0000 R11: ffffffff8952a940 R12: 0000000000008f3a

[ 17.574795] R13: 0000000000008f3a R14: ffff9cf3e88a0000 R15: 0000000000000000

[ 17.574795] FS: 00007f6e6edfe340(0000) GS:ffff9cf568600000(0000) knlGS:0000000000000000

[ 17.574796] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033

[ 17.574797] CR2: 00007f6e70cae300 CR3: 0000000112c30001 CR4: 0000000000770eb0

[ 17.574798] PKRU: 55555554

[ 17.574799] Call Trace:

[ 17.574800] <TASK>

[ 17.574802] inet_csk_listen_start+0x7e/0xf0

[ 17.574804] inet_listen+0x91/0x170

[ 17.574806] ? __fdget+0x13/0x20

[ 17.574809] __sys_listen+0x56/0x90

[ 17.574812] __x64_sys_listen+0x14/0x20

[ 17.574814] do_syscall_64+0x34/0x80

[ 17.574817] entry_SYSCALL_64_after_hwframe+0x46/0xb0

[ 17.574819] RIP: 0033:0x7f6e70bd8767

[ 17.574820] Code: f0 ff ff 77 06 c3 0f 1f 44 00 00 48 8b 15 b1 b6 0b 00 f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 b8 32 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 89 b6 0b 00 f7 d8 64 89 01 48

[ 17.574821] RSP: 002b:00007ffe170a5b08 EFLAGS: 00000202 ORIG_RAX: 0000000000000032

[ 17.574823] RAX: ffffffffffffffda RBX: 00007f6e5c3d0780 RCX: 00007f6e70bd8767

[ 17.574824] RDX: 00007ffe170a5a44 RSI: 0000000000000005 RDI: 0000000000000031

[ 17.574824] RBP: 0000000000000031 R08: 0000000000000004 R09: 00007f6e6edfda40

[ 17.574825] R10: 000000000b794014 R11: 0000000000000202 R12: 00007ffe170a5b78

[ 17.574826] R13: 00007f6e5c3d07c8 R14: 00007ffe170a5c80 R15: 0000000000000000

[ 17.574827] </TASK>

[ 17.574827] ---[ end trace 0000000000000000 ]---

Display More

Hi.

I tested at NUC11PAHI5 with LG OLED65BX.

If i turn on the nuc11 first, and then turn on the TV, it recognizes 4k+120hz and plays hdr video normally.

But if i turn on the TV first and then the nuc11, it can only recognize 4k+60hz, and hdr video playback black screen.

For example, when the TV is on, and restart the nuc11, this issue will occur.

I tested at NUC11PAHI5 with LG OLED.

1. The hdr video could not enter HDR mode, but the previous(20211020222733-d3745e7) was find.

2. Still not support 4k120hz. (The built-in hdmi support 4k120hz, tested in win10)

Kodi jellyfin works in local mode and uses nfs for playback.

If turn off prime drm switch play hdr video is normal, just the video is sdr mode.

Quote from Klojum

For starters...

Please provide a full debug log.

How to post a log (wiki)

1. Enable debugging in Settings>System Settings>Logging
2. Restart Kodi
3. Replicate the problem
4. Generate a log URL (do not post/upload logs to the forum)

use "Settings > LibreELEC > System > Paste system logs" or run "pastekodi" over SSH, then post the URL link

The The file is too big, so I uploaded it to dropbox.

First enable hdr to play hdr, second disable hdr to play hdr.

kodi.log

Shared with Dropbox

www.dropbox.com

hardware: nuc11pahi5

system: nightly 2021.11.27

When the prime hdr switch is turned on, the video will be stuck.

But when closed prime hdr switch, it does not automatically enter hdr mode.