My ir-receiver works fine in Ubuntu
Posts by ferro9
-
-
No. Doesn’t work.
I execute the commands manually in that order.
modprobe ir_rc6_decoder
modprobe rc_rc6_mce
modprobe mceusb
systemctl restart kodi
None returns any error but the ir-receiver doesn’t work
-
Code
No module returned any errors but the ir-receiver still doesn't work. lsmod after start modules manually: http://ix.io/3LU1 lsmod after hot plug: http://ix.io/3LTY -
Thanks Da Flex for you help.
Now autostart.sh run the modules ir_rc6_decoder, rc_rc6_mce and mceusb but the ir-receiver stills no working.
-
Yes. I've tried everything and the ir-receiver doesn't work. I'm a beginner and I need some clue. Thanks
-
No one can help me?
No solution for my ir-reciver?
-
I use LE Generic.x86_64 10.0.1, motherboard Asus E35M1-I, and IR remote Philips SRM5100/10
https://www.philips.co.uk/c-p/SRM5100_10/
# dsmeg: http://ix.io/3H4y
If I start LE with the ir-receiver plugged, it doesn't work.
# lsusb: http://ix.io/3H4C
# ir-keytable: No devices found
If I unplugged it and plugs it back then it works fine.
# lsusb: http://ix.io/3H4G
# dmesg: http://ix.io/3H4J
# ir-keytable:
Found /sys/class/rc/rc0/ with:
Name: Media Center Ed. eHome Infrared Remote Transceiver (0471:060c)
Driver: mceusb
Default keymap: rc-rc6-mce
Input device: /dev/input/event11
LIRC device: /dev/lirc0
Supported kernel protocols: lirc rc-5 rc-5-sz jvc sony nec sanyo mce_kbd rc-6 sharp xmp imon rc-mm
Enabled kernel protocols: lirc rc-6
bus: 3, vendor/product: 0471:060c, version: 0x0101
I need help to configure my ir-receiver to boot properly with the system. Thanks