pi@raspberrypi:~ $ vcgencmd bootloader_config
[all]
BOOT_UART=0
WAKE_ON_GPIO=1
POWER_OFF_ON_HALT=0
DHCP_TIMEOUT=45000
DHCP_REQ_TIMEOUT=4000
TFTP_FILE_TIMEOUT=30000
ENABLE_SELF_UPDATE=1
DISABLE_HDMI=0
BOOT_ORDER=0xf41This is from a Kernel V5 Raspbian. As mentioned, with Kernel V4 I did not get a prompt or ssh-connect, becasue the system hangs.
Unfortunately no.
I also checked the UID with lsblk in my ARCH-Linux and edit it, no success. Also replacing the UUID with "/dev/sda1" and "/dev/sda2" did not solved the issue.
Booting only with HDMI without success.
The issue ist also with original bootloader (03.09.2020)
Bootloader (started from working image, from there I updated the bootloader)
> uname -a
Linux raspberrypi 5.10.17-v7l+ #1403 SMP Mon Feb 22 11:33:35 GMT 2021 armv7l GNU/Linux
> sudo rpi-eeprom-update
BCM2711 detected
VL805 firmware in bootloader EEPROM
Checking for updates in /lib/firmware/raspberrypi/bootloader/default
Use raspi-config to select either the default-production release or latest update.
BOOTLOADER: up-to-date
CURRENT: Do 18. Mär 08:54:11 UTC 2021 (1616057651)
LATEST: Do 3. Sep 12:11:43 UTC 2020 (1599135103)
RELEASE: default
VL805: up-to-date
CURRENT: 000138a1
LATEST: 000138a1Working cmdline.txt from Linux raspberrypi 5.10.17-v7l+
boot=UUID=1103-0809 disk=UUID=9ee2217f-7b96-4eee-8977-167cca3a35d6Not working cmdline.txt from LE V9.2.6
boot=UUID=2410-0508 disk=UUID=09814adf-0b3e-462b-ad3f-abd8815b9b92 initcall_debug=1 loglevel=8Login with ssh is not possible, because the system hangs . I have no login, no ssh.
Which bootloader version do you have installed? Check / upgrade it to latest from working OS as described here.
I have the latest bootloader installed. This was done with an Image based on Kernel 5. All the hangs on booting are with images based on Kernel V4.
No modifications or tweaks, I only removed "quiet" from config.txt.
Sorry, didn't mentioned it. I also tried newest Raspbian. Keep in mind, LibreElec MATRIX boots succesfully.
Same issue with Rufus to write the SD-Card.
It`s a fresh install. All tries, SD-card and USB-Stick.
I used LibreElec-USB-Creator, but also RaspberryPi-Imager.
Hello,
I have tried several versions of 9.2.x (.6 / .5. / .4). All hang with the message random: crng init done" . Before that the message "random: fast init done" lasts about 2 minutes.
I have tried different SD cards (all 32GB), and a 2GB USB stick. I have also tried different power supplies.
The V9.95.1 (Matrix) boots and works fine. However, I want to use Kodi V18.
Hardware: Raspberry4 with 2GB
Who can help me?
