Posts by Eagle5966

Thanks for the reply. I tried to do what you suggested, but the other HDMI power shows no signs of life. My TV is Samsung QE55Q950RBTXZT 8k Argon is a nice case and I would hate to go back to the previous case

I own a Raspberry Pi4 8gb - I changed the original case (white and red with miniHDMI ports) with the Argon one Pi4 V2 case. The problem, which was not present in the previous case, is the lack of audio. I tried to make the change in config by inserting the line hdmi_drive = 2 to no avail.

Also tested with hdmi_drive = 2

hdmi_ignore_edid = 0xa5000080

hdmi_mode = 16

hdmi_group = 1

As per post, but the second command blocks the boot

Thanks for each vs. valuable suggestion

I have already tried, but on Argon One the operational port is only the one near the power supply

Hi

I own a Raspberry Pi4 8gb - I changed the original case (white and red with miniHDMI ports) with the Argon one Pi4 V2 case. The problem, which was not present in the previous case, is the lack of audio. I tried to make the change in config by inserting the line hdmi_drive = 2 to no avail.

Also tested with hdmi_drive = 2
hdmi_ignore_edid = 0xa5000080
hdmi_mode = 16
hdmi_group = 1

As per post, but the second command blocks the boot

Thanks for each vs. valuable suggestion