Posts by janumix

On RPI3 with DVB-S2 receiver I observed very slow channel switching using slow SD-card (where LE was installed). Replacing it with faster one made it much much faster.

Quote from vpeter

Try

Code

LOCPATH=/storage/.kodi/addons/service.web.lamp/lib/locale php occ -h

Much better - thanks !

@vpeter - very bad news

Has one able to use 'occ' from owncloud ?
It seams that php do not respect environment from "/storage/.kodi/addons/http://service.web.lamp/lib" where en_US-UTF-8 exists. How to force it ?

HTPC:$ php occ -h


Setting locale to en_US.UTF-8/fr_FR.UTF-8/es_ES.UTF-8/de_DE.UTF-8/ru_RU.UTF-8/pt_BR.UTF-
8/it_IT.UTF-8/ja_JP.UTF-8/zh_CN.UTF-8 failed
Please install one of these locales on your system and restart your webserver

Finally all works fine !

Tip for others:
I replaced my power supply for both RPI and DVBSky. Since that time no error occurred.

Quote from lrusak

The rpi-tools addon includes the RPi.GPIO library.

then you would have to prepend the code with something like

Code

import sys
sys.path.append('/storage/.kodi/addons/virtual.rpi-tools/lib')


import RPi.GPIO as GPIO

Thanks, I'll try to use it.

Hi

Is there any add-on or script allowing to use volume knob link in this article ?
Rotary class

BR
Janusz

Quote from janumix

Connected to Ubuntu with CC drivers worked fine for 2 days with no error.
Today I installed your version (does it mean "media_build" ?) and will see...

It's working fine since that time, so I hope it's ok right now.
Maybe kernel ?

Quote from CvH

No idea whats wrong Did you found any proposals what could fix it ?
I would try media_build - if this is not working no idea (crazycat won't work at RPi)

Connected to Ubuntu with CC drivers worked fine for 2 days with no error.
Today I installed your version (does it mean "media_build" ?) and will see...

Quote from CvH

Uploaded 1.64
- updated Digital Device to latest
- updated ljalves-cc to latest
- updated tbs-oss to latest
- updated crazycat to latest
- updated media_build to kernel 4.9 drivers

DVBSky S960 works with LE official - for what do you need CrazyCat ?

Display More

suffer from this:
failure=-110

Hi

Is there any chance to have CrazyCat DVB drivers for DVBSky S960 USB receiver ?
Needed modules: dvb_usb_dvbsky, dvb_usb_v2, m88ds3103
and firmware:
DvbSky-firmware

BR
Janusz

Quote from m.hueske

Firmware is the same 3.B
But mine shows a valid MAC address...

To be honest I don't have an idea what might cause this issue, just wanted to share what helped me.
Anyone else here who can help?

Thanks - I know now that I have working fw and set up
Maybe somebody else could help me ...

Bit wired that MAC is always ff:ff:ff:ff:ff:ff .....

[    4.360655] usb 1-1.2: dvb_usb_v2: found a 'DVBSky S960/S860' in warm state
[    4.362607] usb 1-1.2: dvb_usb_v2: will pass the complete MPEG2 transport stream to t
he software demuxer
[    4.362660] DVB: registering new adapter (DVBSky S960/S860)
[    4.365723] usb 1-1.2: dvb_usb_v2: MAC address: ff:ff:ff:ff:ff:ff
[    4.372396] i2c i2c-3: Added multiplexed i2c bus 4
[    4.509694] ts2020 4-0060: Montage Technology TS2022 successfully identified
[    4.509742] usb 1-1.2: DVB: registering adapter 0 frontend 0 (Montage Technology M88D
S3103)...
[    4.557316] Registered IR keymap rc-dvbsky
[    4.557640] input: DVBSky S960/S860 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-
1.2/rc/rc0/input3
[    4.557804] rc0: DVBSky S960/S860 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.
2/rc/rc0
[    4.557818] usb 1-1.2: dvb_usb_v2: schedule remote query interval to 300 msecs
[    4.557830] usb 1-1.2: dvb_usb_v2: 'DVBSky S960/S860' successfully initialized and co
nnected
[    4.557899] usbcore: registered new interface driver dvb_usb_dvbsky

Here I can find fw version = 3.B. How about yours ?

[   10.356228] m88ds3103 3-0068: found a 'Montage Technology M88DS3103' in cold state
[   10.357459] m88ds3103 3-0068: downloading firmware from file 'dvb-demod-m88ds3103.fw'


[   11.390301] m88ds3103 3-0068: found a 'Montage Technology M88DS3103' in warm state
[   11.390315] m88ds3103 3-0068: firmware version: 3.B
[   11.406394] usb 1-1.2: DVB: adapter 0 frontend 0 frequency 0 out of range (950000..21
50000)

Quote from m.hueske

Directly attached (e.g. without the hub) the messages disappeared and everything was working as expected.

How is your setup? If you also have an USB hub maybe this could be worth a try.

It's connected directly to RPI....

Hi

I'm using DVBSky S960 USB SAT receiver on RPI3B with Libeelec. It generaly works fine until following lines appear in dmesg output:

[4952.874220] usb 1-1.2: dvb_usb_v2: usb_bulk_msg() failed=-110
[4952.874235] usb 1-1.2: failed=-110

Since that nothing but hard restet (power off) receiver and restart Libreelec can help.
I did some searching over Inet and found 2 solutions:
1. replace power supply (I did but without any special results)
2. install new firmware (don't know how to do it on Libreelec)

Any help appreciated
BR
Janusz

Hi

Is there any chance to compile php5-libsmbclient just to allow owncloud access external SMB drives (as it was introduced in 8.1 ownCloud 8.1 Release Notes — ownCloud 8.1 Server Administration Manual 8.1 documentation) ?

BR
Janusz