Posts by KRWaara

I have a rather old Grundig 24" TV in my kitchen. I have been using a R Pi with LibreElec 9.2 attached to the TV for long time without any problems. I gave the R Pi to my brother and thought that this would be a nice time to upgrade

So I created a new Raspberry Pi (4 B) with LibreElec 10.

Everything worked as it should, and I'm getting the KODI desktop when the Pi it has booted up, but no way I can cet the HDMI-CEC (Grundig is calling this DIGILINK) to work so using the TV remote is not working.

Under Source I am selecting HDMI 1 (where the Pi is attached) After this I'm supposed to select the DIGILINK source (the KODI) but it's not there. It just won't show up as it should.

I've tried this with two R Pi 4B and also changed the HDMI - cables. Both of which are brand new.

The R Pi I gave to my brother is also a R Pi 4B but with LibreElec 9.2 and when I attach this to my TV it work as it should, and the KODI is there under Digilink Sources.

Are there HDMI - cables out there that dont' support Digilink/CEC?

Anything? A link or a tip or two would be so nice. I've empied all my options (which are sort of limited).

Regards Roger, Sweden

Thanks for your help!

Thanks for your reply.

I know how to SSH myself in to LE and I also know where to shut down the whole thing (LE + KODI) but how/where do I stop just Kodi?

R

I have a 250 Mbit fibre to my house. My LE is running on a wired Cat 5 network today at some 100 Mbits/second. The IPTV freezes annoyingly often i yhink due to the slow speed.

I have access to a 5 GHz WiFi which should give me some 1,3 GGbits indoors and a full 250 Mbits to my LE. This 5GHz net is set to Type=manual rather than DHCP, and this can't be changed which is the problem....

In the "Connection" - section in LibreElec the network just sits there with the Type= "manual" and if I enter the network I have two options: "Connect" or "Update". I once was able to set this to "manual" but now it can't be set back to DHCP. Might be because it's not connected. And as the setting is wrong I can't connect to the router and change it. Catch 22, so to speak...

I consider this to be a bug, but these are only my 25 cents worth of opinion..

I have been searching far and wide with no success. So you guys are my last hope.

I'm running LE 9.2.6 in a Raspberry Pi 4. The installation is some 6 months old and has been updated in steps up to present level.

Besides this problem it works as a charm

Cheers and thank you in advance

Roger/Sweden