Posts by sengol

    Hello.
    I installed libreelec 10.0.3 in order to make my touch screen work in HDMI type waveshare 10.1".
    I installed the touchscreen addon but this one does not work. Everything worked fine with LE9.2.8 so I took the same settings in ts.conf and ts_env.sh
    The driver that manages the touchpad is an "egalax", the screen is 1024X600. The raspberry is not connected to the screen by the pins.
    Has anyone managed to get this device to work with LE10.0.3?
    evtest gives: evtest
    No device specified, trying to scan all of /dev/input/event*
    Available devices:
    /dev/input/event0: eGalax Inc. USB TouchController
    Select the device event number [0-0]: 0
    Input driver version is 1.0.1
    Input device ID: bus 0x3 vendor 0xeef product 0x1 version 0x100
    Input device name: "eGalax Inc. USB TouchController"
    Supported events: Event type 0 (EV_SYN) Event type 1 (EV_KEY) Event code 330 (BTN_TOUCH) Event type 3 (EV_ABS) Event code 0 (ABS_X) Value 0 Min 0 Max 2047 Event code 1 (ABS_Y) Value 0 Min 0 Max 2047
    Properties:
    Testing ... (interrupt to exit)
    Event: time 1673708044.451285, type 1 (EV_KEY), code 330 (BTN_TOUCH), value 1
    Event: time 1673708044.451285, type 3 (EV_ABS), code 0 (ABS_X), value 1494
    Event: time 1673708044.451285, type 3 (EV_ABS), code 1 (ABS_Y), value 1605
    Event: time 1673708044.451285, -------------- SYN_REPORT ------------
    Event: time 1673708044.470266, type 3 (EV_ABS), code 1 (ABS_Y), value 1606
    Event: time 1673708044.470266, -------------- SYN_REPORT ------------
    Event: time 1673708044.479266, type 3 (EV_ABS), code 1 (ABS_Y), value 1608
    Event: time 1673708044.479266, -------------- SYN_REPORT ------------
    Event: time 1673708044.484268, type 3 (EV_ABS), code 0 (ABS_X), value 1495
    Event: time 1673708044.484268, type 3 (EV_ABS), code 1 (ABS_Y), value 1612


    I also used with both files and every time when I start calibrating the wheel spins and nothing happens. Is what must be superuser? Is it possible to know the pattern of operation of the addon?

    Hello. My touch screen is this one HDMI/VGA + Conseil de Contrôle Pilote + 7 pouces AT070TN90 800x480 Écran lcd + Écran Tactile Pour Raspberry Pi + diy outils pas pour téléphone portable n dans Mobile Téléphone Lcd de Téléphones et Télécommunications sur AliExpress.com | Alibaba Group. It is very well set up and works fine with Raspbian. With libreelec 7.90 i do not come to the set, I have install the addon service.system.touchscreen and the addon estouchy, evtest recognizes the touchscreen, is what to say somewhere that the driver is egalax? Thank you.

    Hello, first I am sorry for my bad English. Secondly I tested a compilation of libreelec for my touchscreen egalax but happened to step "5.) Changing kernel configuration (linux.arm.conf) to enable touch support egalax" I can not find the following two lines CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH = y
    CONFIG_HID_MULTITOUCH = y. I have this lines # CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH is not set and # CONFIG_HID_MULTITOUCH is not set. Do you have an idea to solve this error? Is it possible to find something in the folder Libreelec.tv to solve thir problem ?
    . Thank you for the work you have done ...