Posts by Mak975

Hi, i'm testing LibreELEC-S905.arm-8.0-8.0.1j on mini mxIII 905 2gb 16 gb.
I'm not able to see in audio setting optical output, only hdmi or bluetooth.
How i can do to set spdif ?
Thankyou

Quote from RowanDDR

Mini MX is 1Gbit lan not 100Mbit? So try gxbb_p200_2G_1Gbit.dtb ?

You are right. It's on my friend not mine. I''will try right device tree. I hope that scaler problem is due to it.
Thank you

Inviato dal mio SM-G935F utilizzando Tapatalk

Quote from kszaq

Mak975 Please download from Index of /s905/device_trees/

I consolidated device trees folder because they are the same for 7.0 and 8.0 builds.

Hi kszaq, i tryed gxbb_p200_2G_100M.dtb on mini mx 2 gb but when play video i see only a quarter of image and this happen with 1080p divx and 4k.
Dashbord is ok, but when play video display show only a part of video
Before i had LibreELEC-S905.aarch64-7.0.2.006.img with this gxbb_p200_2G_mini_mxg_2_16.dtb and all worked fine.
What device tree i have to use ?
beelink mini mx (logo bear) have 2 gb ram and 16 gb storage with 905
Can i use old device tree ?
Thankyou

Hi friends, i need device tree for mini mx 2g 16gb for [7.0.3.012j] but device_trees is down.
where i can find it ?
Thankyou

Quote from pingu

As LibreELEC is the way forward with these Boxes as the supplied Android image is pretty much garbage, I have made an update for all S905/X Nexbox's with 2GB of RAM.

LibreELEC-S905X-gxl_p212_2g.zip
Mirror: uc?export=download&confirm=Lje1&id=0B21a8VVM4QfGby14ajZtb05pVlE

This is based on the 2016-10-03-devel version.

All I have done is included the dtb.img. Without it HD audio won't work and gives the crackling sound. I have also replaced the Nexbox boot image with the default Amlogic S905X boot image.

To install just flash with TWRP recovery.

(This is the TWRP recovery for the Nexbox A5, it may work with other S905X boxes but I have only tested it with the Nexbox A5. To install, rename the file recovery.img and place it onto a sd card then put it into the box. Hold the reset button while powering on the device and it will boot into TWRP. You can install TWRP to the Nexbox A5's recovery by going to install, selecting "image" instead of zip, and flashing it to "recovery".)

This should work with:

• Tanix TX5 Pro
• MINIM8SII
• Nexbox A5
• Nexbox A95x
• COOLEME MB1

Display More

Is possible install in sd card or only nand?
Thanks

Inviato dal mio SM-T815 utilizzando Tapatalk

Hi, i'have kszaq previous build on my m8s II sdcard (2gb ram) can i upgrade to latest dev build or i have to do fresh install? Then i'd like to know is necessary replace default dtb.image with gxl_p212_2g.dtb ?
Thankyou

Hi, i have a old kszaq buil on SD card of my mini m8s II. I'd like to update with latest kszaq build.
I read 905 topic.

Is it enough to put LibreELEC-S905.aarch64-7.0-devel-20160925032632-r23354-g31edb11.img in update folder (SD card) and reboot ?
Have to do other ?
Thanks

Quote from dastinger

As I told you before, I didn't do anything other than burning the img to the SD card and boot.

Are you having issues booting?

Thanks friend i'm out for work only the day afert tomorrow i could try.
I read that dtb.img file for 905x must be delete from root of sd card burned so i asked you confirm, but as you wrote i will non delete dtb.img file if for work so.

Quote from dastinger

Yes, that's it. The one on post #116.

I didn't do anything other than burning the img to an SD card and booting using the toothpick method.

Hi friend can ask you if you have delete db. IMG file ? Thanks

Inviato dal mio GT-N7100 utilizzando Tapatalk

Quote from dastinger

Yes, that's it. The one on post #116.

I didn't do anything other than burning the img to an SD card and booting using the toothpick method.

Ok, i will try
Can i ask you if wifi work ?
Thankyou

Quote from dastinger

Mine works perfectly.

Thanks, so are you using this build s905x-ap6255 ?
have you to copy remote.conf from Android firmware into sd root for remote work ?

Quote from dastinger

Do you mean the Mini M8S II? If so, post #116. I'm using that build and it's working flawlessly.

Yes mini m8s 2 905x 2gb ram 8gb storage.
does original remote work ?

Hi i have m8s ii, i read all 3d i don't understand which is at the momement best LE Image for this device. I know that 3build of kszaq worked but i don't find it Now. Also pulsar i know that work but i don't know if installation procedure for boot from sd is the same. Who has this device can Tell me which at the moment the best ? Thanks

Inviato dal mio GT-N7100 utilizzando Tapatalk

Hi, i have minimx ver 1. 2gb ram 16gb storage (bear logo).
I tryed to install 7.0.2.006 on samsumg evo 32 gb.
I downloaded LibreELEC-S905.aarch64-7.0.2.006.img.gz

extracted and burned with win32diskimage on sd
Then i replace on root dtb.img with (gxbb_p200_minimx.dtb renamed dtb.img)
I tryed to use toothpick method but recovery doesn't start, device freeze on bear logo.

What i can do ?
Thankyou