Posts by Schorsch

Hallo,

inzwischen gelang es mir, das Raspberry LibreELEC als Netzlaufwerk im Windows Explorer einzubinden. Und dort fand ich dann auch die LibreELEC Backup.tar Datei, die ich dann auf meinen PC separat gesichert habe.

Ich möchte allerdings auf meinem Windows 11 PC ein weiteres LibreELEC einrichten. Um die Bibliothek dazu nicht nochmals sehr zeitaufwändig erstellen zu müssen, hier meine Fragen:

1. Kann ich die Daten meiner Filmbibliothek aus dem vorhandenen Backup auslesen und für LibreELEC auf dem Windows-PC nutzen?

2. Oder gibt es andere Wege, dies zu bewerkstelligen?

Gruß Horst

Hat sich erledigt.

Google Translated

Hello,

In the meantime I managed to integrate the Raspberry LibreELEC as a network drive in Windows Explorer. And there I found the LibreELEC Backup.tar file, which I then backed up separately on my PC.

However, I would like to set up another LibreELEC on my Windows 11 PC. In order not to have to create the library again, which is very time-consuming, here are my questions:

1. Can I read the data from my film library from the existing backup and use it for LibreELEC on the Windows PC?

2. Or are there other ways to do this?

Greeting Horst

It's been dealt with.

Quote from Da Flex

The solution is easier. .....

Thanks for the hint. For the time being, however, I will still only switch on the Raspberry manually when the TV is on - I got used to it after a few days and it is not as annoying as I initially thought.

Hi,

When looking through some forums I encountered a problem with the HDMI connection between the Raspberry PI 4
and a connected TV.

Background: I switch TV and Raspberry via a single switch socket
at the same time.

After that, it may be necessary to turn on the TV in front of the Raspberry to watch the Raspberry boot
the possibility to recognize and use the HDMI interface of the TV. Otherwise the television will remain black.

Ask:
Is there a way with LibreELEC to stop the boot process for a few seconds (30 sec? Config file?) And only then with the Connect TV via HDMI,
if it is switched on and ready for operation?
And if so, how should I proceed?

Greetings Schorsch