Posts by wylda

The problem is still present, can't update/upgrade through GUI.

To update from v9.2.6 -> v9.95.1 i still have to update manually through CLI SSH console.

Problem is still present:

• v9.2.5 -> v9.2.6 (needs manual update through SSH console)

I wonder, why such simple and widespread bug isn't simply fixed by changing the string back to non-accented ANSI/ASCII letters or simply kept in English? Same way as bootloader firmware and USB firmware - asks me in English, but buttons are ANO / NE (YES / NO ) :c))

.

Problem is still present:

• v9.2.3 -> v9.2.4 (needs manual update through SSH console)
• v9.2.4 -> v9.2.5 (needs manual update through SSH console)

Thank you for help and support. So next time can i put TAR file into /storage/.update instead of IMG and reboot?

And when my SD card has two partition:

• mmcblk0p1 ... 512MB vFAT
• mmcblk0p2 ... 30GB+ ext4

TAR updates just the 30GB ext4?

IMG contains partition table + vFAT (boot?) + ext4 and does some trickery to adapt partition table to different size of SD card?

When i was reading your post i thought, that when i already used IMG it rewrote my vfat+ext4 and i lost recorded TV shows etc. on ext4 But when i double checked the content, all my data reminded intact on linux ext4. Uffff... Cool.

PS: shouldn't be that wiki page changed from IMG to TAR, when it mentions UPDATE?

I successfully updated through SSH / CLI:

cd /storage/.update
ls -alF
wget http://releases.libreelec.tv/LibreELEC-RPi4.arm-9.2.3.img.gz
reboot

But when i compared the image file with KODI log, i wonder, why GUI uses TAR archive instead of above image file??

wget http://releases.libreelec.tv/LibreELEC-RPi4.arm-9.2.3.tar

?

Hi, i have a RPi4 running 9.2.1. When i try to manually update LibreElec to 9.2.3, it silently fails.

Previous versions, at least 9.2.0 to 9.2.1 was fine, because i needed Wireguard

Log shows, that Czech letters are probably involved in this issues - wild guess "Jm\xc3\xa9no souboru:" vs. "Jméno souboru:"

2020-06-08 06:16:52.403 T:2980987760  NOTICE: PulseAudio: Opened device Default in pcm mode with Buffersize 300 ms

2020-06-08 06:16:56.728 T:3011858448   ERROR: Control 1000 in window 13001 has been asked to focus, but it can't

2020-06-08 06:17:03.165 T:2962219888   ERROR: ## LibreELEC Addon ## oe::download_file(http://releases.libreelec.tv/LibreELEC-RPi4.arm-9.2.3.tar, /storage/.kodi/temp/update_file) ## ERROR: (UnicodeDecodeError('ascii', 'Jm\xc3\xa9no souboru: ', 2, 3, 'ordinal not in range(128)'))

2020-06-08 06:17:03.166 T:2962219888   ERROR: Traceback (most recent call last):
File "/var/lib/jenkins/LE/build5/workspace/RPi4/build.LibreELEC-RPi4.arm-9.2.1/LibreELEC-settings-6f6ca1e46c230d1e5045e6bb92a03889e1f1c71a/.install_pkg/usr/share/kodi/addons/service.libreelec.settings/oe.py", line 389, in download_file
File "/var/lib/jenkins/LE/build5/workspace/RPi4/build.LibreELEC-RPi4.arm-9.2.1/LibreELEC-settings-6f6ca1e46c230d1e5045e6bb92a03889e1f1c71a/.install_pkg/usr/share/kodi/addons/service.libreelec.settings/oe.py", line 133, in update
UnicodeDecodeError: 'ascii' codec can't decode byte 0xc3 in position 2: ordinal not in range(128)

2020-06-08 06:22:43.752 T:2980987760  NOTICE: PulseAudio: Opened device Default in pcm mode with Buffersize 300 ms

I can probably fix that by SSH or switching into English, but i thought it could be useful to report.

Update LibreELEC [LibreELEC.wiki]

Thanks.