Hi all.
I have a Raspberry Pi 1b with cvh.libreelec.tv/LibreELEC/8.2_Krypton/ image and an Terratec Cinergy S2 USB Box in Rev4. I have installed the RazyCat driver but the box dont work.
dmesg | egrep -i "dvb|dw2102|ds3|firmware|ts2020"
[ 0.107913] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-10-24 17:13
[ 6.058833] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
[ 6.061653] kernel-overlays-setup: processing conf /storage/.cache/kernel-overlays/50-driver.dvb.crazycat.conf
[ 6.210127] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/driver.dvb.crazycat/lib/modules/4.9.59
[ 19.585597] 127e399e44fa0951ff497450db47e053fa600679 dvb-usb-dw2102: Geniatech X9320 support.
[ 19.718285] 127e399e44fa0951ff497450db47e053fa600679 dvb-usb-dw2102: Geniatech X9320 support.
[ 19.853372] dw2102: su3000_identify_state
[ 19.853389] dvb-usb: found a 'Terratec Cinergy S2 USB HD Rev.4' in warm state.
[ 19.853422] dw2102: su3000_power_ctrl: 1, initialized 0
[ 19.854206] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 19.854404] dvbdev: DVB: registering new adapter (Terratec Cinergy S2 USB HD Rev.4)
[ 19.899700] dvb-usb: MAC address: bc:ea:2b:46:13:a5
[ 20.421764] Invalid probe, probably not a DS300x
[ 20.619792] Modules linked in: m88ds3103(O) i2c_mux ds3000(O) dvb_usb_dw2102(O+) dvb_usb(O) dvb_core(O) rc_core(O) bcm2835_gpiomem fixed
[ 20.620039] LR is at su3000_frontend_attach+0x324/0x4a0 [dvb_usb_dw2102]
[ 20.622746] [<7f0381ac>] (su3000_frontend_attach [dvb_usb_dw2102]) from [<7f02f590>] (dvb_usb_adapter_frontend_init+0xfc/0x1e0 [dvb_usb])
[ 20.622930] [<7f02f494>] (dvb_usb_adapter_frontend_init [dvb_usb]) from [<7f02e90c>] (dvb_usb_device_init+0x46c/0x63c [dvb_usb])
[ 20.623156] [<7f02e4a0>] (dvb_usb_device_init [dvb_usb]) from [<7f03651c>] (dw2102_probe+0x30c/0x47c [dvb_usb_dw2102])
[ 20.623379] [<7f036210>] (dw2102_probe [dvb_usb_dw2102]) from [<803d6c28>] (usb_probe_interface+0x160/0x2a0)
[ 20.624478] [<803d56b8>] (usb_register_driver) from [<7f04301c>] (dw2102_driver_init+0x1c/0x2c [dvb_usb_dw2102])
[ 20.624643] [<7f043000>] (dw2102_driver_init [dvb_usb_dw2102]) from [<80009674>] (do_one_initcall+0x44/0x178)
Can somebody help me?