Posts by genidy.m

Dear Jernej,

Booting stuck because it didn't recognize the "boot and disk" UUID entry also same thing in "unofficial build of libreelec uses label instead of uuid", so i replaced those entry to use device logic name like this "APPEND boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 console=tty1 console=ttyS0,115200" and now worked very well, i don't know why it can't handle label or uuid, but for now it working well, i will play with it to discover it, finally i really thank you for all your support and thanks all "Libreelec" guys for that OS, it working really very fast, beautiful interface, i like it very much than ugly android os.

Tevii P500 (Sunvell Q+)

-------------------------------

*OS booting very fast

*HDMI video & audio working very well

*Ethernet working very well

*kore remote control working very well, i used to configure libreelec insted of mouse as (booting libreelec with attached lan and kore zeroconf worked very well), really good.

*Wireless not recognized ('ifconfig -a' showed no interface, driver missing or some thing else)

Thanks again to all "Libreelec" guys.

Quote from rix81

thanks genidy.m

at least error message is visible now

5yr6Ge.jpg

Dear rix81,

You are welcome, i faced same issue, "HDMI" never output unless i reversed the console entries. also i faced boot stuck and never worked unless i used device logic name like this "APPEND boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 console=tty1 console=ttyS0,115200"

Quote from rix81

Hi jernej, do you keep old images for H6 somewhere?

Beelink gs1 (H6) doesnt boot current LE image. Just black screen.

I checked my posts on other forum, an image from end of october 2019 was working. Don't remember exact date, any change to test old images to find working one? Thank you

Dear rix81,

could you reverse console entries in "extlinux.conf" to start with "console=tty1 console=ttyS0,115200" instead of "console=ttyS0,115200 console=tty1" to see if "HDMI" output again.

Quote from jernej

Nothing in the logs... This reminds me on Eachlink box, where no error is logged but HDMI output also doesn't work. Unless I get such unit, I can't do anything.

Dear Jernej,

I tried "Armbian" and found that "HDMI" output working, then tried unofficial build of "Libreelec" and found some success that screen appeared for one second then black screen, then reversed console entries to start with "console=tty1 console=ttyS0,115200" instead of "console=ttyS0,115200 console=tty1" and "HDMI" output working well, then i tried with official one here and it is working too, i can see now the output on TV, also if i removing "console=ttyS0,115200" and keeping "console=tty1" screen goes black again, so two console entries must exist and reversed, moreover i facing a new issue that it stuck at "mmc1: new DDR MMC card at address 0001", kodi not started.

Quote from jernej

Nothing in the logs... This reminds me on Eachlink box, where no error is logged but HDMI output also doesn't work. Unless I get such unit, I can't do anything.

Dear Jernej,

Thanks four your support, i will follow forum in case of any new, Thanks again.

Quote from Tytun

yes it went fine but the sound doesn't work. Neither the analog or the signal passthrough to the receiver.

the other thing is that if I connect HDMI directly to the TV, the picture goes, but if I connect HDMI to the AV receiver, the picture will not find ... I don't get it. It doesn't matter what resolution I set.

Dear Tytun,

What build number you tired with your box "Sunvell Q+", and if you still have it can you send to me.

Quote from jernej

Sorry to say, but configuration for display is same, so it should work. Can you test with different monitor and different HDMI cable?

Dear Jernej,

I tried different "HDMI" cables, another TV also same results, but while i "power on" and "power off" i noticed there are a new messages about "mmc1", but i saw this message only after restarting more than once, some times it comes some times not, kindly find the UART dump in attachments.

Quote from jernej

genidy.m No error can be found in logs, so I can't do anything. If you can find android image for that box (either full image or update file), I can check few things, but no promises. Device tree file from live system would also work but I can't guide you since every Android is a bit different.

Dear jernej,

Thanks for your quick reply, yes i have the the full official android image, i used because i bricked it after i installed "SuperSU," so i flashed it and working very well with android.

Tevii P500 is a rebrand for "sunvell Q+".

You can find the box and some picture for the SOC here "https://forum.freaktab.com/forum/frealkta…6-tv-box-review".

You can download the android image from here "https://mega.nz/file/g8VmiQxB#…G6VU5h46%20fGsI"
also i can upload it to my google drive if there issue in the mentioned link.

Thanks again.

Quote from chewitt

genidy.m please do not cross-post the same information to multiple threads. If you make one post it will be seen by the developers and mods. Multi-posting is annoying and will normally decrease (not increase) the chances of someone taking an interest in your problem.

Dear Chewitt,

Noted with thanks.

Sorry for that, i thought because there is more than one threads about same "SOC" it will be useful to put the UART dump, sorry i didn't mean to cross-posting, again i am sorry.

Quote from jernej

RedFighterCZ sorry for late response. Can you confirm this is still the case with latest nightly image, e.g. LibreELEC-H6.arm-9.80-devel-20200426012033-38764c8-tanix-tx6.img.gz ? I tested it and it seems to work correctly.

Dear jernej,

I tried with one you mentioned "LibreELEC-H6.arm-9.80-devel-20200426012033-38764c8-tanix-tx6.img.gz", but still same thing as "LibreELEC-H6.arm-9.80-nightly-20200601-83a3b6d-tanix-tx6.img.gz", black screen output, but UART confirm kernel boot, kindly find the UART dump in attachments.

Dears,

I own "Tevii p500" which is a "Sunvell Q+" and it's same as "Tanix x6", i booted from "SD card" but output on my TV is a black screen, so i connected to it's UART and i can confirm kernel booting till "init" start, then no message, so what is wrong, kindly find the UART dump in attachments.

Quote from genidy.m

Dears,

I own a tevii p500 android box which uses "allwinner h6", I think it's also "sunvell Q+" as it's boot showing "Q+" logo

I wish it to be supported by "libreELEC", how I can I test it with "Tanix TX6" img, what is the steps, can I burn the img directly with "phoenixcard" or what exactly the steps/

http://tevii.com/Products_p500_1.asp

Dears,

I connected to it's UART and i can confirm kernel boot, but i don't know why it output black screen on my TV, kindly find the UART dump in attachments.

Quote from lumpi

genidy.m as I have no H6 based device unfortunately I can't try anything, sorry.

Dear Lumpi,

Thanks for your reply, any way i will put it here for general debug.

Quote from genidy.m

Dears,

I own tevii p500 which is a sunvell Q+ but rebranded as tevii p500, i want to try libreelec so i downloaded last tanix x6 nightly img, burned with libreelec usb/sd writer software onto 32GB sandisk micro sd, inserted the sd onto tevii p500 and plug the power, i saw blue led light on but on TV no screen just black screen.

I think boot detect because TV printed "no hdmi signal detected" but after 30 seconds the TV message disappeared but the screen is black.

Any advice plz.

Products_p500_1.asp

Dears,

I connect via UART, and i can see kernel boot but no screen, kindly find the UART dump in attachments

Quote from lumpi

No need for any Allwinner tools. Just write the img to the sd card with dd, etcher, win32diskimager any tool writing the image bit for bit to your card. Then enther the sd into its slot and power up the box.

Dear Lumpi,

Thanks for your reply, i downloaded last "Tanix x6" nightly IMG, burned with "libreelec USB/SD writer" software onto 32GB Micro SD, inserted the SD onto "Tevii p500" and plug the power, i saw blue led lights on, but on TV no screen just black screen.

I think boot detect because TV printed "no hdmi signal detected" but after 30 seconds the TV message disappeared but the screen is black.

so i will connect to it's UART via "TTL USB" to catch the messages and put it here, Thanks again.

Dears,

I own tevii p500 which is a sunvell Q+ but rebranded as tevii p500, i want to try libreelec so i downloaded last tanix x6 nightly img, burned with libreelec usb/sd writer software onto 32GB sandisk micro sd, inserted the sd onto tevii p500 and plug the power, i saw blue led light on but on TV no screen just black screen.

I think boot detect because TV printed "no hdmi signal detected" but after 30 seconds the TV message disappeared but the screen is black.

Any advice plz.

Products_p500_1.asp

Dears,

I own a tevii p500 android box which uses "allwinner h6", I think it's also "sunvell Q+" as it's boot showing "Q+" logo

I wish it to be supported by "libreELEC", how I can I test it with "Tanix TX6" img, what is the steps, can I burn the img directly with "phoenixcard" or what exactly the steps/

http://tevii.com/Products_p500_1.asp