Posts by RacerX

    When I installed a test Libreelec generic version 9.95.5 everything appears to be fine. I'm using the stock estuary skin.

    I connect to a samba share and updated the data. It's good. When I watch a show after about 10 to 15 minutes. I notice the symptom of the issue, I would adjust the volume and it moves half of the way around the circle because my remote is not clicking one time it's actually 4 times for every single click. My Logitech keyboard still works properly when this happens. I enabled the developer debug log and look a little at LIRC. I needed some more insight, Another thing when I reboot the box my remote goes back to normal.

    For a workaround I created a small Custom Lircmap.xml

    /storage/.kodi/userdata/

    But this doesn't seem to help. I tested today with the screen menu up on the screen and was able to watch a show and move back an forth for about 56 minutes and then as soon a I turned it off the issue starts one click equals four clicks immediately. From this test I can see that menu stops this problem. In other words the problem happens when just watching a show with no menu.

    Hello

    This week I tested out

    LibreELEC-Generic.x86_64-9.2.2

    on my Asus AT3N7A-I Intel Atom board

    When I first tried the remote my board was out of the case the remote started to go crazy with double or triple clicks. So I put the board back into the case and moved the firefly wireless receiver r1000-1 dongle down away from the box. It still was still double clicking but not as much. So I started to use my keyboard.

    Then I found an old post in the forum

    remote double button press

    A developer HiassofT (thanks)

    suggested

    Create a /storage/.config/modprobe.d/atiremote.conf file like this:


    Code

    1. options ati_remote repeat_filter=XXX repeat_delay=YYY

    With Putty I ssh in and went to the director y /storage/.config/modprobe

    There is no atiremote.conf file

    So I used nano and created one with this line

    Code
    options ati_remote repeat_filter=XXX repeat_delay=YYY

    I saved the file and then rebooted and to my surprise it works fine.......:)