Posts by GRegNfo

I have 11.0.6 Legacy (with nVidia support) and can´t make CHROME work... it starts downloading, and then "FAILED!" message appears...

Is anything that I'm missing?

Hi Zomboided,

I have installed 11.0.5 on a intel PC.
I installed zomboided tools and manager and using PIA vpn.

Currently I'm suffering from very low speeds and was wondering:

* The vpn servers are updated automatically or must we manually update them?

* Will you use Wiregard protocol in the future?

I'll test later Libreelec on some other PC to check if it is only a local problem.

PIA vpn On linux and windows is updated and fast... no problems

Thanks

Quote from ilmich

Hi,

try to open file on sdcard first partition extlinux/extlinux.conf and remove/adjust the resolution inside kernel parameter 'video'

[EDIT]: I used a VGA to HDMI adapter to plug the monitor to the box!

Output: 1 x VGA DB15 fem. VESA up to WUXGA, 1920 x 1080 at 60 Hz + 3.5 mm stereo jack

link:

HDMI to VGA and audio adapter, single port, black (A-HDMI-VGA-02)

Hi guys,

I tried to plug my V88-4K (rk3229) box to a monitor (supports touch but whatever) that is capable of:

640 x 480 at 60Hz

800 x 600 at 60Hz

1024 x 768 at 60Hz

1280 x 800 at 60, 60RB Hz

1280 x 960 at 60Hz

1280 x 1024 at 60Hz

1360 x 768 at 60Hz

1366 x 768 at 60, 60RB Hz

I couldn't manage to make it sync so, no image at all... it tries to auto sync to the box with no result.

Do I need to change anything in the SYSTEM image, add some file to my SD card root or folders?

Thanks!!!

Quote from knaerzche

Just updated the legacy images where I reverted to use of UHS speeds and updated to everything latest. SD card releated boot problems should be gone by now: Check first post.

If your not familar with LE yet: You can always take the coresponding *.tar file - put it to the "update" folder (smb) or to /storage/.update/ (scp) and reboot the device - all your settings/addons will be kept this way.

tipaklong014: if you really want to install to internal nand (it won't have any advantages) - you can check how to do this here: [unoffical] LE-9.2/9.80-Images for RK3229/RK3228. I never would do this, when not having uart access

Got my V88 4K image to boot!!! just gotta figure out the remote... Thanks you guys rock... chip

When installing RK3229 images to SD, what is supposed to be the choice on the menu regarding the chips? no selection returns error... choosing rk3399 works... did not try to boot yet but writes to SD fine. Any thoughts??? No RK3229 choice there... or even generic RK32**

Quote from knaerzche

MX4N are usually DDR2 boards - so go ahead and try V88Mars LibreELEC-RK322x.arm-9.2-devel-20200301143855-b58333a-rk3228b-v88marsII.img.gz (RK3229) or Alfawise A8 LibreELEC-RK322x.arm-9.2-devel-20200301143608-b58333a-rk3228b-a8.img.gz (RK3228) image. Try to avoid using UHS SD cards with this any of the curent builds.

Hi very kind to reply!

After searching for specs on the chips this is what I found:

Organization:| DDR3L-1333 (9-9-9)| Package |

-----------------------------------------------------------

512MB x4 | K4B2G0446D | 78 FBGA |

K4B2G0446D-HYH9 datasheet(5/64 Pages) SAMSUNG | 2Gb D-die DDR3L SDRAM
//////////////////////////

My Board is V88-4k (not MINI, MARS or other that have different SOC)

Do you recommend the same?

pic front

pic back

Quote from jimjack12

Goodmorning everyone,

I tested the image on the Dolamee D5 yesterday:

"LibreELEC-RK322x.arm-9.2-devel-20200301144659-b58333a-rk3229-v884k.img"

and I confirm that both the lan connection and the wi-fi works!!!!!

Excellent work knaerzche

Thanks so much

Display More

Hi, I have a Scishion V88 4k, board: TX-MX4N-V20 (2017-03-29) CHIPTRIP
This is the right firmware for it? or for a more recent review of the board?

I tried one from 1 month ago and crashed :\

I'll update when I ahve time thanks so much!