Sure, the firmware is shared by Amlogic. To make it load while keeping the driver work with other chips, I need an output from the following command: cat /sys/bus/sdio/devices/*/device; cat /sys/bus/sdio/devices/*/vendor
Here is output from your s905x-test3 build (from stock android meson1.dtb copied to dtb.img)
0xa9bf
0xa9bf
0xa9bf
0x02d0
0x02d0
0x02d0
Here is a bluetooth firmware from stock android
Thanks for the help.
3rd test build: s905x-test3
Tested on Tanix TX5 Pro Amlogic s905x/2GB RAM/16GB eMMC/Ampak AP6255 module for WiFi 802.11 b/g/n/ac and Bluetooth 4.0 LE connectivity
From SD card it works normaly (From both USB ports hungs and complain about tty...)
!!! Be patient, first boot after SDCard preparation is 2-3 min !!!
Here is my findings on this build
remote - Works normaly (power on and power off of device also work),
WiFi 2.4 GHz - do not work,
WiFi 5 GHz - do not work
Bluetooth do not work,
Ethernet - works normaly
USB both ports - works normaly,
SSH login - works normaly
PlayBack
1080p all tested movies Auto refresh rate works normaly
h265, h264 works normaly
dont have 4k tv for testing 4k contents
Is there any possibility to use AP6255 modules from android stock rom ?
Attached is all BCM roms currently not present in test build
Great work!
Big thanks for the build!
... and here it is:http://www.memoryleaks.org/libreelec.tv/s905x/
Lets hope kszaq comes up with an idea how to use the same set of build options / patches etc for S905 and S905X. Diff against the "official" 006 branch: eUib - so there are mainly some additions and serial console changes to the linux kernel. Other changes are either cosmetics or not relevant for non-debug releases.
Please note that this is an experimental build and not well tested.
Tested on Tanix TX5 Pro Amlogic s905x/2GB RAM/16GB eMMC/Ampak AP6255 module for WiFi 802.11 b/g/n/ac and Bluetooth 4.0 LE connectivity
From SD card it works normaly (just copied meson1.dtb to dtb.img from stock android firmware, maybe this step is not necesary)
!!! Be patient, first boot after SDCard preparation is 2-3 min !!!
Here is my findings on this build
remote - Works normaly (power on and power of of device also work),
WiFi 2.4 GHz - do not work,
WiFi 5 GHz - do not work
Bluetooth do not work,
Ethernet - works normaly
USB botw ports works normaly,
SSH login works normaly
PlayBack
1080p all tested movies Auto refresh rate works normaly
h265, h264 works normaly
dont have 4k tv for testing 4k contents
Exelent smooth playback, much better than from stock android + kodi 16.1
Currently only one problem encountered on some h.265 and h.264 movies after fast forward (up key) there is problem with audio out of sync
Also tested starting from usb stick in both usb ports but without success (there is no LibreElec logo only black screen) and after 15 sec complains about tty...
Great work!
Big thaks for the build
