Posts by Keredo

Hi,

I couldn't believe it, but the problem seems to be the cable.... I feel like a bloody newbie not checking this first
But you gave to solution: the xrandr brought me first this line:

(old cable)

Quote

LibreELEC:~ # xrandr
Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 8192 x 8192
HDMI-0 connected primary (normal left inverted right x axis y axis)
1024x768 60.00
800x600 60.32 56.25
848x480 60.00
640x480 59.94
HDMI-1 disconnected (normal left inverted right x axis y axis)
VGA-0 disconnected 1280x1024+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1280x1024 (0x55) 108.000MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 63.98KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.02Hz

Display More

The new cable gave me:

Quote

LibreELEC:~ # xrandr
Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 8192 x 8192
HDMI-0 connected primary (normal left inverted right x axis y axis)
1920x1080 50.00 + 60.00 59.94 24.00 23.98
1920x1080i 60.00 50.00 59.94
1280x720 60.00 50.00 59.94
720x576 50.00
720x576i 50.00
720x480 60.00 59.94
720x480i 60.00 59.94
640x480 60.00 59.94
HDMI-1 disconnected (normal left inverted right x axis y axis)
VGA-0 disconnected 1280x1024+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1280x1024 (0x55) 108.000MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 63.98KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.02Hz

Display More

First I thought it was just a mistake, but I can reproduce it again and again... Stupid faulty cable

Thank you very much for your help.

Greetings

Hi,

my fault... stupid me
I switched the display before I generate the logs...

Here is the log with hdmi connected tv and switched on... but no change (no picture) at all

QEJW

Quote

Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 8192 x 8192
HDMI-0 connected primary (normal left inverted right x axis y axis)
1920x1080 50.00 + 60.00 59.94 24.00 23.98
1920x1080i 60.00 50.00 59.94
1280x720 60.00 50.00 59.94
720x576 50.00
720x576i 50.00
720x480 60.00 59.94
720x480i 60.00 59.94
640x480 60.00 59.94
HDMI-1 disconnected (normal left inverted right x axis y axis)
VGA-0 disconnected 1280x1024+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1280x1024 (0x55) 108.000MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 63.98KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.02Hz

Display More

Hello Klojum,

thank you very much for your response.

The box is directly connected to the tv. I've also tried the stable version of libreelec... same result

JESM

Quote

Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 8192 x 8192
HDMI-0 connected primary (normal left inverted right x axis y axis)
1024x768 60.00
800x600 60.32 56.25
848x480 60.00
640x480 59.94
HDMI-1 disconnected (normal left inverted right x axis y axis)
VGA-0 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 338mm x 270mm
1280x1024 60.02*+ 75.02 72.05
1152x864 75.00
1024x768 75.08 70.07 60.00
832x624 74.55
800x600 72.19 75.00 60.32
640x480 75.00 72.81 66.67 60.00
720x400 70.08
640x350 70.07

Display More

dDhN
AHFG

Greetings
Keredo

Hello everyone,

I hope so badly, someone could help me. Currently I try to setup my htpc with libreelec 7.9 (exactly: LibreELEC-Generic.x86_64-7.90.004.img ), but I fail at the first step... I couldn't get my TV to display any hdmi signal.

When I install libreelec with a VGA display connected, Everything seem to work, but with hdmi only nothing works.

My system:

Board: ASRock E350M1
ASRock > E350M1

With onboard graphics:
AMD Radeon HD 6310

dmesg also returns strange errors:

Quote

[ 7.631726] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 87
[ 7.631739] Raw EDID:
[ 7.631747] 00 ff ff ff ff ff ff 00 34 a9 29 c3 01 01 01 01
[ 7.631752] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.631757] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.631762] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.631767] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.631772] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.631776] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.631781] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.631793] radeon 0000:00:01.0: HDMI-A-1: EDID block 0 invalid.
[ 7.631803] [drm:radeon_dvi_detect] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[ 7.903019] [drm:radeon_dvi_detect] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[ 8.721031] r8169 0000:04:00.0 eth0: link up
[ 8.721062] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 8.728045] 8021q: 802.1Q VLAN Support v1.8
[ 9.735337] snd_hda_intel 0000:00:01.1: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 12.799632] [drm:radeon_dvi_detect] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[ 13.122225] [drm:radeon_dvi_detect] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[ 13.397904] [drm:radeon_dvi_detect] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[ 22.814271] [drm:radeon_dvi_detect] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID

Display More

I hope someone could help me to set the system up.

Greetings
Keredo