Posts by llegion2k6

  • MSI A78M-E35 wake up on LAN/USB possible?

    So it's activated at least for the yatse app if I'm right?

    Settings for eth0:
    Supported ports: [ TP AUI BNC MII FIBRE ]
    Supported link modes: 10baseT/Half 10baseT/Full
    100baseT/Half 100baseT/Full
    1000baseT/Full
    Supported pause frame use: Symmetric Receive-only
    Supports auto-negotiation: Yes
    Supported FEC modes: Not reported
    Advertised link modes: 10baseT/Half 10baseT/Full
    100baseT/Half 100baseT/Full
    1000baseT/Full
    Advertised pause frame use: Symmetric Receive-only
    Advertised auto-negotiation: Yes
    Advertised FEC modes: Not reported
    Link partner advertised link modes: 10baseT/Half 10baseT/Full
    100baseT/Half 100baseT/Full
    1000baseT/Full
    Link partner advertised pause frame use: Symmetric
    Link partner advertised auto-negotiation: Yes
    Link partner advertised FEC modes: Not reported
    Speed: 1000Mb/s
    Duplex: Full
    Port: MII
    PHYAD: 0
    Transceiver: internal
    Auto-negotiation: on
    Supports Wake-on: pumbg
    Wake-on: g
    Current message level: 0x00000033 (51)
    drv probe ifdown ifup
    Link detected: yes

  • MSI A78M-E35 wake up on LAN/USB possible?

    Hi,

    I upgraded my existing htpc and am wondering, if I can get wake up on LAN (via connected WIFI-router via cable) or USB (logitech K400+ wireless keyboard) to work?

    My mainboard is a MSI A78M-E35 and if my lookup is correct with a realtek RTL8111G network-chip.

    Of course I disabled eup2013 power-saving and enabled all the wake-up-options in bios, however nothing of that worked :(

    Maybe worth to note: stand-by via power-menu doesn't work but I don't care as i either torn it on or off.

    I found some solution via a small connected board which connects to the power-switch but I'd really prefer a software-solution