Nope. It's extremely ugly thing, which halves transfer speed. It was introduced only because I didn't have understanding how to properly write eMMC DT node. Now eMMC works for me on Tanix TX6 box and OrangePi 3 with full speed without issues. If it doesn't work for you, then root cause must be found and fixed.
Thanks for the answer. Unfortunately, i do not have enough knowledge. As soon as something else breaks, i will throw this TVbox in the trash.
Jernej, consider returning projects/Allwinner/devices/H6/patches/linux/14-eMMC-workaround.patch to master? This problem was solved only in this way. All this time i build LibreElec manually. Which is somewhat inconvenient.
No difference. Logs are from boot sd card.
Builds up to LibreELEC-H6.arm-9.80-nightly-20200119-635fa1e-tanix-tx6 work fine. I can to boot LibreELEC from eMMC.
I saw a change on git. I assumed that the problem would be fixed based on feedback. But judging by the activity on the forum, my box is worse.
U-Boot SPL 2020.01-rc1 (Jan 20 2020 - 13:57:23 +0100)
DRAM: 4096 MiB
Trying to boot from MMC1
NOTICE: BL31: v2.1(release):9.0.0-2495-g5c2daec2d2
NOTICE: BL31: Built : 12:25:17, Jan 20 2020
NOTICE: BL31: Detected Allwinner H6 SoC (1728)
NOTICE: BL31: Found U-Boot DTB at 0xc07a970, model: Eachlink H6 Mini
NOTICE: PMIC: Probing AXP805
ERROR: Start clear bit timeout
ERROR: PMIC: Cannot put AXP805 to master mode.
U-Boot 2020.01-rc1 (Jan 20 2020 - 13:57:23 +0100) Allwinner Technology, Build: jenkins-H6-165
CPU: Allwinner H6 (SUN50I)
Model: Eachlink H6 Mini
DRAM: 3 GiB
MMC: mmc@4020000: 0, mmc@4022000: 1
Loading Environment from FAT... *** Warning - bad CRC, using default environment
In: serial@5000000
Out: serial@5000000
Err: serial@5000000
Net: No ethernet found.
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
182 bytes read in 5 ms (35.2 KiB/s)
1: LibreELEC
Retrieving file: /KERNEL
17803776 bytes read in 1785 ms (9.5 MiB/s)
append: boot=UUID=2001-5337 disk=UUID=da6f8d5d-34a2-4da8-82e5-b411dfc2a7ac console=ttyS0,115200 systemd.debug-shell=1
Retrieving file: /sun50i-h6-tanix-tx6.dtb
18134 bytes read in 5 ms (3.5 MiB/s)
## Flattened Device Tree blob at 4fa00000
Booting using the fdt blob at 0x4fa00000
Loading Device Tree to 0000000049ff8000, end 0000000049fff6d5 ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.4.7 (jenkins@tsuboi) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #1 SMP PREEMPT Mon Jan 20 12:24:25 CET 2020
[ 0.000000] Machine model: Tanix TX6
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 384 MiB at 0x00000000e8000000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0xe79e0800-0xe79e1fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] percpu: Embedded 22 pages/cpu s49624 r8192 d32296 u90112
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] Speculative Store Bypass Disable mitigation not required
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 774144
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: boot=UUID=2001-5337 disk=UUID=da6f8d5d-34a2-4da8-82e5-b411dfc2a7ac console=ttyS0,115200 systemd.debug-shell=1
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 2672812K/3145728K available (9660K kernel code, 746K rwdata, 3912K rodata, 3008K init, 348K bss, 79700K reserved, 393216K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] random: get_random_bytes called from start_kernel+0x2b8/0x444 with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000253] Console: colour dummy device 80x25
[ 0.000323] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.000334] pid_max: default: 32768 minimum: 301
[ 0.000423] LSM: Security Framework initializing
[ 0.000496] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.000520] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.000570] *** VALIDATE tmpfs ***
[ 0.001006] *** VALIDATE proc ***
[ 0.001258] *** VALIDATE cgroup1 ***
[ 0.001267] *** VALIDATE cgroup2 ***
[ 0.024031] ASID allocator initialised with 32768 entries
[ 0.032027] rcu: Hierarchical SRCU implementation.
[ 0.040505] EFI services will not be available.
[ 0.048062] smp: Bringing up secondary CPUs ...
[ 0.080508] Detected VIPT I-cache on CPU1
[ 0.080557] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.112442] Detected VIPT I-cache on CPU2
[ 0.112473] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.144500] Detected VIPT I-cache on CPU3
[ 0.144529] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.144601] smp: Brought up 1 node, 4 CPUs
[ 0.144618] SMP: Total of 4 processors activated.
[ 0.144625] CPU features: detected: 32-bit EL0 Support
[ 0.144632] CPU features: detected: CRC32 instructions
[ 0.150262] CPU: All CPU(s) started at EL2
[ 0.150286] alternatives: patching kernel code
[ 0.151956] devtmpfs: initialized
[ 0.156136] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.156158] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.167493] pinctrl core: initialized pinctrl subsystem
[ 0.168321] DMI not present or invalid.
[ 0.168688] NET: Registered protocol family 16
[ 0.170137] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.170157] audit: initializing netlink subsys (disabled)
[ 0.170322] audit: type=2000 audit(0.168:1): state=initialized audit_enabled=0 res=1
[ 0.171282] cpuidle: using governor menu
[ 0.171529] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.172154] Serial: AMBA PL011 UART driver
[ 0.189126] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.189141] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.189149] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.189157] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.192331] cryptd: max_cpu_qlen set to 1000
[ 0.197558] iommu: Default domain type: Translated
[ 0.197961] SCSI subsystem initialized
[ 0.198466] usbcore: registered new interface driver usbfs
[ 0.198522] usbcore: registered new interface driver hub
[ 0.198607] usbcore: registered new device driver usb
[ 0.199004] mc: Linux media interface: v0.10
[ 0.199045] videodev: Linux video capture interface: v2.00
[ 0.199216] pps_core: LinuxPPS API ver. 1 registered
[ 0.199224] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.199248] PTP clock support registered
[ 0.199900] Advanced Linux Sound Architecture Driver Initialized.
[ 0.200749] clocksource: Switched to clocksource arch_sys_counter
[ 0.200972] VFS: Disk quotas dquot_6.6.0
[ 0.201032] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.201073] *** VALIDATE ramfs ***
[ 0.201090] *** VALIDATE hugetlbfs ***
[ 0.208668] thermal_sys: Registered thermal governor 'step_wise'
[ 0.208672] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.209195] NET: Registered protocol family 2
[ 0.209656] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.209717] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.209987] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.210492] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.210611] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.210710] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.210924] NET: Registered protocol family 1
[ 0.211362] RPC: Registered named UNIX socket transport module.
[ 0.211369] RPC: Registered udp transport module.
[ 0.211374] RPC: Registered tcp transport module.
[ 0.211379] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.250474] Initialise system trusted keyrings
[ 0.250603] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[ 0.258508] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.259249] NFS: Registering the id_resolver key type
[ 0.259277] Key type id_resolver registered
[ 0.259282] Key type id_legacy registered
[ 0.259296] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.259464] 9p: Installing v9fs 9p2000 file system support
[ 0.277179] NET: Registered protocol family 38
[ 0.277195] Key type asymmetric registered
[ 0.277202] Asymmetric key parser 'x509' registered
[ 0.277208] Asymmetric key parser 'pkcs8' registered
[ 0.277266] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.277395] io scheduler mq-deadline registered
[ 0.277403] io scheduler kyber registered
[ 0.277906] sun50i-de2-bus 1000000.bus: Error couldn't map SRAM to device
[ 0.278722] sun4i-usb-phy 5100400.phy: failed to get clock usb0_phy
[ 0.283114] sun50i-h6-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver
[ 0.283745] sun4i-pwm 300a000.pwm: get bus clock failed (____ptrval____)
[ 0.296814] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.300555] panfrost 1800000.gpu: clock rate = 432000000
[ 0.300583] panfrost 1800000.gpu: bus_clock rate = 100000000
[ 0.300605] panfrost 1800000.gpu: 1800000.gpu supply mali not found, using dummy regulator
[ 0.300705] panfrost 1800000.gpu: mali-t720 id 0x720 major 0x1 minor 0x1 status 0x0
[ 0.300715] panfrost 1800000.gpu: features: 00000000,10309e40, issues: 00000000,21054400
[ 0.300725] panfrost 1800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002821 AS:0xf JS:0x7
[ 0.300733] panfrost 1800000.gpu: shader_present=0x3 l2_present=0x1
[ 0.302131] [drm] Initialized panfrost 1.1.0 20180908 for 1800000.gpu on minor 0
[ 0.302519] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.309939] loop: module loaded
[ 0.312166] libphy: Fixed MDIO Bus: probed
[ 0.313157] tun: Universal TUN/TAP device driver, 1.6
[ 0.315737] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.315750] ehci-platform: EHCI generic platform driver
[ 0.315945] ehci-platform 5101000.usb: EHCI Host Controller
[ 0.315971] ehci-platform 5101000.usb: new USB bus registered, assigned bus number 1
[ 0.316087] ehci-platform 5101000.usb: irq 23, io mem 0x05101000
[ 0.328762] ehci-platform 5101000.usb: USB 2.0 started, EHCI 1.00
[ 0.329454] hub 1-0:1.0: USB hub found
[ 0.329488] hub 1-0:1.0: 1 port detected
[ 0.330069] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.330097] ohci-platform: OHCI generic platform driver
[ 0.330282] ohci-platform 5101400.usb: Generic Platform OHCI controller
[ 0.330303] ohci-platform 5101400.usb: new USB bus registered, assigned bus number 2
[ 0.330406] ohci-platform 5101400.usb: irq 24, io mem 0x05101400
[ 0.393432] hub 2-0:1.0: USB hub found
[ 0.393468] hub 2-0:1.0: 1 port detected
[ 0.394386] usbcore: registered new interface driver uas
[ 0.394476] usbcore: registered new interface driver usb-storage
[ 0.397170] sun6i-rtc 7000000.rtc: registered as rtc0
[ 0.397183] sun6i-rtc 7000000.rtc: RTC enabled
[ 0.397289] i2c /dev entries driver
[ 0.397801] IR NEC protocol handler initialized
[ 0.397808] IR RC5(x/sz) protocol handler initialized
[ 0.397813] IR RC6 protocol handler initialized
[ 0.397818] IR JVC protocol handler initialized
[ 0.397822] IR Sony protocol handler initialized
[ 0.397827] IR SANYO protocol handler initialized
[ 0.397832] IR Sharp protocol handler initialized
[ 0.397837] IR MCE Keyboard/mouse protocol handler initialized
[ 0.397841] IR XMP protocol handler initialized
[ 0.397846] ir_imon_decoder: IR iMON protocol handler initialized
[ 0.397851] IR RCMM protocol handler initialized
[ 0.398016] sun50i-h6-r-pinctrl 7022000.pinctrl: 7022000.pinctrl supply vcc-pl not found, using dummy regulator
[ 0.398238] Registered IR keymap rc-tanix-tx5max
[ 0.398322] rc rc0: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0
[ 0.398458] input: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0/input0
[ 0.398736] rc rc0: lirc_dev: driver sunxi-ir registered at minor = 0, raw IR receiver, no transmitter
[ 0.398888] sunxi-ir 7040000.ir: initialized sunXi IR driver
[ 0.399058] usbcore: registered new interface driver xbox_remote
[ 0.400486] sunxi-wdt 7020400.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[ 0.401052] sun50i-cpufreq-nvmem: probe of sun50i-cpufreq-nvmem failed with error -2
[ 0.401355] sdhci: Secure Digital Host Controller Interface driver
[ 0.401362] sdhci: Copyright(c) Pierre Ossman
[ 0.401479] Synopsys Designware Multimedia Card Interface Driver
[ 0.402142] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.402802] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.403066] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.403834] usbcore: registered new interface driver usbhid
[ 0.403845] usbhid: USB HID core driver
[ 0.404781] cedrus 1c0e000.video-codec: Device registered as /dev/video0
[ 0.408014] Initializing XFRM netlink socket
[ 0.408039] NET: Registered protocol family 17
[ 0.408231] 9pnet: Installing 9P2000 support
[ 0.408261] Key type dns_resolver registered
[ 0.408593] registered taskstats version 1
[ 0.408599] Loading compiled-in X.509 certificates
[ 0.425310] sun50i-h6-pinctrl 300b000.pinctrl: initialized sunXi PIO driver
[ 0.425815] sun50i-h6-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-pb not found, using dummy regulator
[ 0.457183] sun50i-h6-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-ph not found, using dummy regulator
[ 0.457602] printk: console [ttyS0] disabled
[ 0.478418] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 18, base_baud = 1500000) is a 16550A
[ 1.681215] printk: console [ttyS0] enabled
[ 1.705109] sun4i-drm display-engine: bound 1100000.mixer (ops sun8i_mixer_ops)
[ 1.712578] sun4i-drm display-engine: bound 6510000.tcon-top (ops sun8i_tcon_top_ops)
[ 1.720679] sun4i-drm display-engine: bound 6515000.lcd-controller (ops sun4i_tcon_ops)
[ 1.728748] sun8i-dw-hdmi 6000000.hdmi: 6000000.hdmi supply hvcc not found, using dummy regulator
[ 1.737939] sun8i-dw-hdmi 6000000.hdmi: Detected HDMI TX controller v2.12a with HDCP (DWC HDMI 2.0 TX PHY)
[ 1.748058] sun8i-dw-hdmi 6000000.hdmi: registered DesignWare HDMI I2C bus driver
[ 1.756444] sun4i-drm display-engine: bound 6000000.hdmi (ops sun8i_dw_hdmi_ops)
[ 1.763858] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.770472] [drm] No driver support for vblank timestamp query.
[ 1.776721] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 1
[ 1.784521] [drm] Cannot find any crtc or sizes
[ 1.789936] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[ 1.795450] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 3
[ 1.803238] xhci-hcd xhci-hcd.3.auto: hcc params 0x0220f064 hci version 0x100 quirks 0x0000000002010010
[ 1.812676] xhci-hcd xhci-hcd.3.auto: irq 25, io mem 0x05200000
[ 1.819115] [drm] Cannot find any crtc or sizes
[ 1.823875] hub 3-0:1.0: USB hub found
[ 1.827658] hub 3-0:1.0: 1 port detected
[ 1.831870] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[ 1.837373] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 4
[ 1.845038] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed
[ 1.851616] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.860208] hub 4-0:1.0: USB hub found
[ 1.863991] hub 4-0:1.0: 1 port detected
[ 1.868832] ehci-platform 5311000.usb: EHCI Host Controller
[ 1.874430] ehci-platform 5311000.usb: new USB bus registered, assigned bus number 5
[ 1.882266] ehci-platform 5311000.usb: irq 26, io mem 0x05311000
[ 1.900763] ehci-platform 5311000.usb: USB 2.0 started, EHCI 1.00
[ 1.907413] hub 5-0:1.0: USB hub found
[ 1.911196] hub 5-0:1.0: 1 port detected
[ 1.915890] ohci-platform 5311400.usb: Generic Platform OHCI controller
[ 1.922529] ohci-platform 5311400.usb: new USB bus registered, assigned bus number 6
[ 1.930378] ohci-platform 5311400.usb: irq 27, io mem 0x05311400
[ 1.997313] hub 6-0:1.0: USB hub found
[ 2.001097] hub 6-0:1.0: 1 port detected
[ 2.005886] usb_phy_generic usb_phy_generic.4.auto: usb_phy_generic.4.auto supply vcc not found, using dummy regulator
[ 2.017079] musb-hdrc musb-hdrc.5.auto: MUSB HDRC host driver
[ 2.022848] musb-hdrc musb-hdrc.5.auto: new USB bus registered, assigned bus number 7
[ 2.031255] hub 7-0:1.0: USB hub found
[ 2.035040] hub 7-0:1.0: 1 port detected
[ 2.043001] ac200-ephy ac200-ephy: DMA mask not set
[ 2.052874] sun50i-h6-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-pf not found, using dummy regulator
[ 2.063323] sunxi-mmc 4020000.mmc: Got CD GPIO
[ 2.093148] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
[ 2.127063] sunxi-mmc 4022000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
[ 2.137806] asoc-simple-card sound: i2s-hifi <-> 5091000.i2s mapping ok
[ 2.144477] asoc-simple-card sound: ASoC: no DMI vendor name!
[ 2.151101] sun6i-rtc 7000000.rtc: setting system clock to 1970-01-01T00:00:05 UTC (5)
[ 2.159295] ALSA device list:
[ 2.162302] #0: allwinner-hdmi
[ 2.167161] Freeing unused kernel memory: 3008K
[ 2.170088] mmc0: host does not support reading read-only switch, assuming write-enable
[ 2.185483] mmc0: new high speed SDHC card at address aaaa
[ 2.188804] Run /init as init process
[ 2.191766] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
[ 2.209439] mmcblk0: p1 p2
[H[J[?25lThe kernel started? I think no.
Hello. I hope this help you.
U-Boot SPL 2020.01-rc1 (Jan 20 2020 - 13:57:23 +0100)
DRAM: 4096 MiB
Trying to boot from MMC1
NOTICE: BL31: v2.1(release):9.0.0-2495-g5c2daec2d2
NOTICE: BL31: Built : 12:25:17, Jan 20 2020
NOTICE: BL31: Detected Allwinner H6 SoC (1728)
NOTICE: BL31: Found U-Boot DTB at 0xc07a970, model: Eachlink H6 Mini
NOTICE: PMIC: Probing AXP805
ERROR: Start clear bit timeout
ERROR: PMIC: Cannot put AXP805 to master mode.
U-Boot 2020.01-rc1 (Jan 20 2020 - 13:57:23 +0100) Allwinner Technology, Build: jenkins-H6-165
CPU: Allwinner H6 (SUN50I)
Model: Eachlink H6 Mini
DRAM: 3 GiB
MMC: mmc@4020000: 0, mmc@4022000: 1
Loading Environment from FAT... *** Warning - bad CRC, using default environment
In: serial@5000000
Out: serial@5000000
Err: serial@5000000
Net: No ethernet found.
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
179 bytes read in 6 ms (28.3 KiB/s)
1: LibreELEC
Retrieving file: /KERNEL
17803776 bytes read in 1784 ms (9.5 MiB/s)
append: boot=UUID=2001-5337 disk=UUID=da6f8d5d-34a2-4da8-82e5-b411dfc2a7ac quiet console=ttyS0,115200 console=tty1
Retrieving file: /sun50i-h6-tanix-tx6.dtb
18134 bytes read in 6 ms (2.9 MiB/s)
## Flattened Device Tree blob at 4fa00000
Booting using the fdt blob at 0x4fa00000
Loading Device Tree to 0000000049ff8000, end 0000000049fff6d5 ... OK
Starting kernel ...
[ 0.278349] sun50i-de2-bus 1000000.bus: Error couldn't map SRAM to device
[ 0.279177] sun4i-usb-phy 5100400.phy: failed to get clock usb0_phy
[ 0.284353] sun4i-pwm 300a000.pwm: get bus clock failed (____ptrval____)Hallo new ver. Tanix TX6 not booting? Pls help.
Yes, I also have this problem.
We have to wait what jernej to say.
