I tried these parameters, but it didn't help:
gpu_mem=320
force_turbo-0
hdmi_ignore_edid=0xa5000080
# I have no idea what 0xa5000080 means
disable_overscan=1
framebuffer_width=1920
framebuffer_height=1080
hdmi_force_hotplug=1
hdmi_group=1
hdmi_mode=16
hdmi_ignore_cec=1
dtparam=audio=on
dtoverlay=vc4-fkms-v3d
max_framebuffers=2
Also tried the other mode with 50hz, but screen still stayed black.
Have removed almost everything and put tvservice -p im autostart.sh and it keeps working at 1080p.
Thank you! hdmi_edid_file=1 did help, but now the resolution is limited to 768p max..
Do you know why kodi only finds these few resolutions?
Thanks for the hints!
I already tried almost everything except for the custom edid file.
Turning on the projector first and then the avr and at last the raspi didn't help either.
But the funny thing is that I tried following commands and now it's working:
Raspi-Kodi:~ # tvservice -s
state 0xa [HDMI CUSTOM RGB lim 16:9], 1920x1080 @ 50.00Hz, progressive
Raspi-Kodi:~ # tvservice -p
Powering on HDMI with preferred settings
Sadly I don't know why and have to go for now. But I keep on trying 
I loaded Libreelec 9.2.0 on my Raspberry PI 4 4GB and connected hdmi 0 to my Yamaha AV receiver. An Optoma projector is connected to the avr, but the receiver is searching for a video signal all the time, but I can hear the Kodi menu. The problem is the same with raspbian and I tried various options like hdmi safe=1, ignore edid, etc., but it didn't help.
The cable is working fine, because when I connect it to my LG monitor I have no problems at all.
The only thing which helped a little was disabling dtoverlay=vc4-fkms-v3d, then raspbian did work, but Kodi didn't and Libreelec at least showed the splash screen.
Please help!
