Posts by peter0815

Just tried the rule for the legacy driver but unfortunately the pc is still freezing. Before it was at least every second time and with the rule it took five tries. Maybe the legacy driver was an improvement but I think it was only by chance.

Hi,

I'm using LibreElec generic x86_64 on a rather old Asus Eee Box EB1501P. I updated from LibreELEC v9.02 to v9.2. Now LibreElec is crashing allmost everytime it is going to standby. This means that screen wents black but the PC is still running (power LED is on, fan is running etc.). A wakeup is not possible, only powering off works

With LibreELEC v9.02 I had no issue. After having problems with v9.2 I also tested the betas. Same problem with v9.2 Beta1 and Beta2.

The EB1501 is using a nvidia ion chipset GPU.

This is the kodi.old.log:

Additional information: First attempt to suspend was successful at 18:53 with wake up at 18:54. But the second attempt at 18:55 led to a crash.

And the output of dmesg:

I used the getedid script. First I tried getedid delete. Then tested the standby. Crash after 3 trials. Then I gave getedid create a try. Some result.

I also did the manual procedure for nvidia GPUs without success. So I guess that some forgotten edid is not the problem.

Now all the edid is removed via getedid delete.

Hi da flex,

Yes, just tried it. With disconnected hdmi it also crashes.

Could it be that some old configuration is the problem? I had a Onkyo AV receiver some years ago that requiered some hard coded hdmi information because after waking up after standby the hdmi was not working. But this was 5 years ago and I removed this after the Onkyo receiver broke down. But maybe some of this information left inside my installation.

Sorry, but the log was cut by pastebin after pasting it, not by me. Thats why I did it again only with the end of the log. I tried just it again, now the log seems to be complete:

I tried to paste a full log but this stops in pastbin after line 1044:

And the other log starts with the resume 18:54 and ends with the crash 18:55

additional information:

I tried the betas. And since LibreELEC 9.2 Beta1 the standby is not working. So it seems the reason is something changed in LibreELEC 9.2 Beta1.

Hi Klojum,

I copied the temp folder before restoring the image. There is no kodi.old.log, only some kodi_crash.logs. I switched the logging on right before testing the issue again. May be logging works if I do a restart after switching the logging on. Can I update to v9.2 and go back to v9.02 using the LibreElec update dialog? So I could try it again.

And yes, the eeePC has a nvida graphics card (nvidea ion).

Re-edit:

I switched on the logging and updated again. Now I can provide a kodi.old.log:

Hi,

I'm using LibreElec generic x86_64 on an asus eeePC. I updated from v9.02 to v9.2. Now LibreElec is crashing everytime it is going in standby. The log seems not be very helpful. A kodi crash log for this crash is missing at all and the normal kodi log seems to start right after the crash. Because I did a back up with clonezilla before updating I'm now on v9.02 again and it is working.

What can I do to find the reason for crashing?

Is it possible to update to v9.2 and go back to v9.02 via the LibreElec update dialog? That would save a lot of time because I can skip the backup.

Peter