Posts by okaiuz

okaiuz

Quote from jbinkley60

If you look in your /etc folder do you see these entries ?

lrwxrwxrwx 1 root root 27 Sep 2 22:04 rc_keymaps -> /storage/.config/rc_keymaps

-rw-r--r-- 1 root root 6594 Sep 2 22:04 rc_maps.cfg

Actually I get the same output when I run the ir-keytable command on my Intel NUC running the latest beta. It actually looks like lircd is running vs. ir-keytable. Maybe there was a change between releases ? I thought prior releases were running ir-keytable but I never looked that closely.

i'll check when back home!

thanks for the tips!

edit: here the output of ls in /etc

Code

drwxrwxr-x    2 root     root           678 Sep  3 03:59 eventlircd.d
-rw-rw-r--    1 root     root          1721 Sep  3 00:53 inputrc
drwxrwxr-x    2 root     root            58 Sep  3 02:35 lirc
-rw-rw-r--    1 root     root            33 Sep  3 00:51 nanorc
lrwxrwxrwx    1 root     root            27 Sep  3 04:04 rc_keymaps -> /storage/.config/rc_keymaps
-rw-r--r--    1 root     root          6594 Sep  3 04:04 rc_maps.cfg
-rw-r--r--    1 root     root          1437 Sep  3 04:18 slsh.rc

okaiuz

Hi All,

i'm facing issue with LibreELEC (official): 9.1.501 (Generic.x86_64) and my remote/airmouse (this one: Telecomando retroilluminato con mini tastiera wireless, Air mouse con porta USB e sensori giroscopici incorporati ideale per piattaforme Kodi e Android scatole, HTPCs, Smart TV, Apple TV, Rasberry Pi: Amazon.it: Elettronica).

i've installed Librelelec on a fujitsu futro s920 thinclient(the same disk previouslsy was installed on gigabyte brix that has dead).

The remote work flawesly out of the box (remote/keyboard and airmouse), but i can't wake from suspend from remote.

here the output of dmsed when i plug the usb receiver:

Code

170992.176683] usb 5-1: new full-speed USB device number 4 using xhci_hcd
[170992.348600] input: 123 COM Smart Control as /devices/pci0000:00/0000:00:10.0/usb5/5-1/5-1:1.0/0003:1915:1028.0006/input/input20
[170992.403885] hid-generic 0003:1915:1028.0006: input,hidraw0: USB HID v1.01 Keyboard [123 COM Smart Control] on usb-0000:00:10.0-1/input0
[170992.412924] input: 123 COM Smart Control Mouse as /devices/pci0000:00/0000:00:10.0/usb5/5-1/5-1:1.1/0003:1915:1028.0007/input/input21
[170992.413251] input: 123 COM Smart Control Consumer Control as /devices/pci0000:00/0000:00:10.0/usb5/5-1/5-1:1.1/0003:1915:1028.0007/input/input22
[170992.466951] input: 123 COM Smart Control System Control as /devices/pci0000:00/0000:00:10.0/usb5/5-1/5-1:1.1/0003:1915:1028.0007/input/input23
[170992.467133] hid-generic 0003:1915:1028.0007: input,hidraw1: USB HID v1.01 Mouse [123 COM Smart Control] on usb-0000:00:10.0-1/input1

this is the output of lsusb and lsusb -t:

Code

omega:/sys/bus # lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 13d3:3315 IMC Networks Bluetooth module
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 7392:7811 Edimax Technology Co., Ltd EW-7811Un 802.11n Wireless Adapter [Realtek RTL8188CUS]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 08bb:2902 Texas Instruments PCM2902 Audio Codec
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 003: ID 24ae:2000  <--usb keyboard
Bus 005 Device 002: ID 1915:1028 Nordic Semiconductor ASA  <-- remote
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

omega:/sys/devices/pci0000:00/0000:00:10.0/usb5/5-2/power # lsusb -t
/:  Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 5000M
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hum4n Interface Device, Driver=usbhid, 12M
    |__ Port 1: Dev 2, If 1, Class=Hum4n Interface Device, Driver=usbhid, 12M
    |__ Port 2: Dev 3, If 0, Class=Hum4n Interface Device, Driver=usbhid, 12M
    |__ Port 2: Dev 3, If 1, Class=Hum4n Interface Device, Driver=usbhid, 12M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/4p, 12M
    |__ Port 3: Dev 2, If 0, Class=Wireless, Driver=btusb, 12M
    |__ Port 3: Dev 2, If 1, Class=Wireless, Driver=btusb, 12M
    |__ Port 3: Dev 2, If 2, Class=Vendor Specific Class, Driver=, 12M
    |__ Port 3: Dev 2, If 3, Class=Application Specific Interface, Driver=, 12M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/4p, 12M
    |__ Port 3: Dev 2, If 0, Class=Audio, Driver=snd-usb-audio, 12M
    |__ Port 3: Dev 2, If 1, Class=Audio, Driver=snd-usb-audio, 12M
    |__ Port 3: Dev 2, If 2, Class=Audio, Driver=snd-usb-audio, 12M
    |__ Port 3: Dev 2, If 3, Class=Hum4n Interface Device, Driver=usbhid, 12M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/4p, 480M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/4p, 480M
    |__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=rtl8192cu, 480M

Display More

this is the output of wakeup properties in usb devices:

Code

omega:/sys/devices/pci0000:00/0000:00:10.0/usb5/5-2/power # grep enabled /sys/bus/usb/devices/*/power/wakeup
/sys/bus/usb/devices/4-3/power/wakeup:enabled
/sys/bus/usb/devices/5-1/power/wakeup:enabled
/sys/bus/usb/devices/5-2/power/wakeup:enabled
/sys/bus/usb/devices/usb1/power/wakeup:enabled
/sys/bus/usb/devices/usb2/power/wakeup:enabled
/sys/bus/usb/devices/usb3/power/wakeup:enabled
/sys/bus/usb/devices/usb4/power/wakeup:enabled
/sys/bus/usb/devices/usb5/power/wakeup:enabled
/sys/bus/usb/devices/usb6/power/wakeup:enabled

this is the output of /proc/acpi/wakeup

Code

omega:~ # cat /proc/acpi/wakeup
Device    S-state      Status   Sysfs node
LAN1      S4    *enabled   pci:0000:01:00.0
LAN2      S4    *disabled
SBAZ      S4    *disabled  pci:0000:00:14.2
OHC1      S4    *enabled   pci:0000:00:12.0
EHC1      S4    *enabled   pci:0000:00:12.2
OHC2      S4    *enabled   pci:0000:00:13.0
EHC2      S4    *enabled   pci:0000:00:13.2
OHC3      S4    *disabled
EHC3      S4    *disabled
XHC0      S4    *enabled   pci:0000:00:10.0
ODD8      S3    *disabled  no-bus:dev2.0
GFX      S3    *disabled

Display More

if i try to run ir-keytable (kodi was runnng) i got this output:

Code

omega:~ # ir-keytable
/sys/class/rc/: No such file or directory
No devices found

i can wake my htpc with usb keyboard (listed on previous lsusb) without problem, but i can't whit remote.

i don't understand what i was missing to get it work!

thanks in advice for your help!

Posts by okaiuz

Libreelec 9.1.501 (Generic.x86_64) wake from remote

Libreelec 9.1.501 (Generic.x86_64) wake from remote