Posts by harun-cuk17

Quote from HiassofT

The journal shows that hyperion can't connect to Kodi. Please change the kodi check address in your hyperion config from

192.168.2.14 to 127.0.0.1.

In addition to that you may also need to enable "Allow remote control from applications on other systems" in Settings->Services->Control (IIRC older kodi versions had a bug that even local connections to 127.0.0.1 didn't work unless this was enabled - could well be that this has been resolved, though).

so long,

Hias

Hias,

I am thinking to buy again and rpi4 4gb because the other one I sent back.

Could you test on the rpi4 if your green and white lights is turning on with an image test? To test the image you should put the images in the map pictures by your rpi ip address

Here are the images to test:

ambilight_test_images.zip

If green and white is working then I will buy an new one.

Waiting for your reply.

Problem solved!

The problem was in the software self.

Thanks all

Hi,

I decided to go from openelec 8.0.4 to libreelec.

In openelec I made an full backup of kodi and copy that to my usb stick.

Then I made an new fresh install of libreelec last software on my rpi3. After that I put back the backup file of OE8.0.4.

So all my addons en settings came back.

The problem now is: when I open an movie or serie my tv is going to flicker every time. When I stop the movie the flickering is stopping.

To check if there is something with the pi or sd card I put back my image file of OE8.0.4. Then I opened an movie and the result was: no flickering.

Could somebody help what this problem is and hoe to solve it?

Hi,

Just make an backup in kodi self. You will navigate to libreelec folder and make an backup. After it is finished you need to copy that backup file to an usb stick. The name of the file is with numbers. Do not change this file name.

Step 2

You need to write the the image file of rpi4 to an new or empty sd card. When it is finished put the sd card in the rpi4. Then boot the pi. You will see that it is preparing the software on the pi.

When it is finished you need to follow some steps like language etc. Then put the usb stick in the pi and go to file Manager. You need to copy the backup file to the root of your pi. When finished then go to libreelec folder and choose for put backup back. Then choose the backup file and wait on that process.

Cheers

Quote from HiassofT

The journal shows that hyperion can't connect to Kodi. Please change the kodi check address in your hyperion config from

192.168.2.14 to 127.0.0.1.

In addition to that you may also need to enable "Allow remote control from applications on other systems" in Settings->Services->Control (IIRC older kodi versions had a bug that even local connections to 127.0.0.1 didn't work unless this was enabled - could well be that this has been resolved, though).

so long,

Hias

Hi buddy,

thanks for your messages. I made the changes and steps you wrote to me. But still problem with the green and white color. After a long proces I decided to sent back the rpi4 to the shop where I bought it. I think there is an problem with the pi self and not other things.

I want to thank you for all your time.

Harun

Hi buddy,

I did all the steps. When I do this:

1. cd pictures
2. hyperion-dispmanx --width 320 --height 180 --screenshot

I see in the map PICTURES on my laptop the color of the picture. Red Blue and green. But green is still not working with the leds.

After step 2 I did also the other 4 steps and here are the links what was made:

http://ix.io/1vvy

http://ix.io/1vvz

http://ix.io/1vva

http://ix.io/1vvb

I hope you could help me and find the problem or solution. I am still thinking that the board is not good but I am not sure.

Waiting on your message.

Many thanks

Do I need to do that by putty?

Hi,

I did a fresh install. Then I installed the hyperion addon. After that I added the text to config.txt

After that I connect via ssh with hypercon from the libreelec site. Local config path and after that I sent the config.

When I reboot the pi I see the rainbow swirl. When I open then image with red and blue picture the lights show thet color. But still not green and white.

I really did what you say to me. But I do not know what the problem could be. When I connect my rpi3 everything works well.

So what could be the problem?

And how could I put the json files to rpi4 then? Which is the bewt method?

Many thanks

So I need to install the hyperion addon and add the text to config file right? Dtpsram=spi=on

After that I need to place the hyperion json files in which map/folder?

Normally I navigate to my rpi from browser like:

//ip adres.

Then I see folders like configfiles, userdata, pictures and more.

I installed the addon by usb stick. After that I changed my config file for: dtparam=spi=on

Then I put my json files in folder configfiles.

After reboot the rpi4 no rainbow effect. So I decided to install hyperion by hypercon but also no result.

So I went to my addons and disabled the hyperion addon. Then reboot the rpi4 again and I saw the rainbow.

But again no working green pictures and white. It is working only by colorwheel in hypercon and smartphone.

I also put the code in putty with ssh but I did not get an screenshot.

So, could we say that the rpi4 board that I have is not okay?

Quote from HiassofT

If you downloaded hypercon from the hyperion website and used that to install hyperion you are running the wrong version.

In that case try to remove whatever hypercon changed on the LibreELEC installation (or just start with a fresh LibreELEC installation, that might be easier) and install hyperion from the LibreELEC addon repository - that'll be the correct version to use.

You can then use hypercon from here Hypercon [LibreELEC.wiki] to configure hyperion on LibreELEC.

Read also here for more information: Hyperion [LibreELEC.wiki]

so long,

Hias

Display More

Hi,

I also try that one with an fresh installation of libreelec, but the same problem. Could be the problem in the pi self?

Many thanks

I have installed my hyperion from hypercon on my raspberry pi 4 4gb.

When I open an blue or red image the led

Lights are working. When I open green or white the lights stay off.

With hypercon ssh on my laptop I can turn on the green and white light. Also the greend and white lights working with my app on my smartphone.

Could somebody please help me what the issue is?

Is thus issue about libreelec or rpi 4 itself?

Ws2801 led strip 118leds

5v 15a power supply for led strip

Original power supply for rpi 4