Posts by PackElend

Quote from petediscrete

I’ll make a suggestion just to see if it gets you going. Also make sure your RPI4 has the latest firmware.

Download the LE 10.0.03 again just to ensure you are getting a good image. As soon as it completes do the following

Format your SD card using SD Formatter

https://www.sdcard.org/downloads/formatter/

Unpack the image file you just downloaded using 7 Zip

https://www.7-zip.org/download.html

Finally use Win 32 Disk imager to write that image you just unpacked to your SD card.

https://win32diskimager.org/

I’ve just completed the above steps and LE is now running on the RPI4 here.

Display More

did that with v11 all works fine.
could be that v11 fixed it

I would say it can not reach docker hub

Does it work with other images / container?

hope that the old topic becomes active again, as I have the same issue with my Pi 4 and Panasonic TX-P55VT30, 55" 3D Plasma, 600Hz, WiFi, Black Pro - digitec

Quote from CvH

We have also Custom EDID [LibreELEC.wiki] , but I am not sure if the RPi is supported there.

changed to EDID - LibreELEC.wiki but no GPU information given

LibreELEC:~ # getedid -help
/usr/bin/getedid create|delete|help

but 
LibreELEC:~ # getedid create
successfully installed edid override for HDMI-A-1

Raspi Docu is probably that one Raspberry Pi Documentation - The config.txt file

from Pi4 without EDID info and can't read EDID - Raspberry Pi Forums I did

LibreELEC:~ # tvservice -l
tvservice is not supported when using the vc4-kms-v3d driver.
Similar features are available with standard linux tools
such as kmsprint from kms++-utils
LibreELEC:~ # kmsprint
Connector 0 (32) HDMI-A-1 (disconnected)
  Encoder 0 (31) TMDS
    Crtc 3 (96) [email protected] 148.500 1920/528/44/148/+ 1080/4/5/36/+ 50 (50.00) P|D
      Plane 6 (119) fb-id: 344 (crtcs: 0 1 2 3 4 5) 0,0 1920x1080 -> 0,0 1920x1080 (XR24 AR24 AB24 XB24 RG16 BG16 AR15 XR15 RG24 BG24 YU16 YV16 YU24 YV24 YU12 YV12 NV12 NV21 NV16 NV61 P030 XR30 AR30 AB30 XB30 RGB8 BGR8 XR12 AR12 XB12 AB12 BX12 BA12 RX12 RA12)
        FB 344 1920x1080 XR24
Connector 1 (42) HDMI-A-2 (disconnected)
  Encoder 1 (41) TMDS

command output is the same, regardless if the TV is off or on and shows the GUI

I hope that helps

Quote from PackElend

Code but LibreELEC:~ # getedid create successfully installed edid override for HDMI-A-1

solved it thx to

- Leave video driver enabled also without monitor connected. - General Support - LibreELEC Forum

- EDID NUC + LibreELEC 10.0.1 - General Support - LibreELEC Forum

- Pi 4 + LE 10.0.1: Need help set custom EDID to fix audio white noise - General Support - LibreELEC Forum

working, serial read:

Quote

��� PRODOGY 49������ VIDEO 2 49�\�� VIDEO 2 49 ������ TAPE 49��� TAPE 49 �}����TP 5 �u� TAPE 54 �y�

although I'm lucky, my rotel does use default settings as screen seems not to support all possible parameters and stty is not available.

It is available as addon, juhu 😀😀

Will do as soon as I am back home

Holà, that was quick😃

Quote from chewitt

access it from a terminal app

What terminal app are available in LibreELEC?

So far I haven't found any.

Hello community,

I hope someone can help me out here.

According to LibreElec + other Linux stuff installed - General Support - LibreELEC Forum, I cannot install any Linux serial console programs mentioned How To Check and Use Serial Ports Under Linux - nixCraft.

How can I check if the host itself (LibreELEC on Pi 4) would be able to control my surround receiver via RS232 using

LibreELEC:~ # dmesg | grep "usb 1-1.4"
[    2.243577] usb 1-1.4: new full-speed USB device number 3 using xhci_hcd
[    2.349783] usb 1-1.4: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
[    2.349797] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.349808] usb 1-1.4: Product: FT232R USB UART
[    2.349819] usb 1-1.4: Manufacturer: FTDI
[    2.349829] usb 1-1.4: SerialNumber: A10K5SV4
[    5.173412] usb 1-1.4: Detected FT232RL
[    5.185287] usb 1-1.4: FTDI USB Serial Device converter now attached to ttyUSB0

Could LIRC an option?

According to LIRC - FTDI driver --> FTDI USB driver the chip itself is supported.

Is the procedure as I linked 😃.

By the way, I updated the procedure to match the current version.

I run a home automation system in parallel.

This shall allow me to control the different player (stereo system, TV etc.)

as Linux-server's docker-compose is deprecated it is a bit different now

1. Create NEW folder within LibreELEC him folder contain the executable
   mkdir /storage/bin (my choice: mkdir /storage/system/bin)
2. Add this to $PATH
   nano /storage/.profile
   PATH=$HOME/bin:$PATH (my choice: PATH=$HOME/system/bin:$PATH )
3. Download Docker compose (All one line)
   1. Pi 4: curl -SL https://github.com/docker/compose…e-linux-aarch64 -o /storage/bin/docker-compose
      (my choice: curl -SL https://github.com/docker/compose…e-linux-aarch64 -o /storage/system/bin/docker-compose)
   2. Pi 3: same as above?
4. Make it executable
   chmod +x /storage/bin/docker-compose
5. Check to see if it works
   cd /storage/bin (my choice: cd //storage/system/bin)
   LibreELEC:~/system/bin # ./docker-compose --version
   Docker Compose version v2.16.
6. If it all works reboot and check again (if the path is set correctly)
   LibreELEC:~ # docker-compose --version
   Docker Compose version v2.16.

where I found help as well:

1. https://github.com/docker/compose…mment-973080626
2. emmtte/LibreELEC-Startup (github.com)

Quote from excalibur

I also use docker compose files.

how did you installed docker-compose? Did you followed Docker compose on LE ? - General Support - LibreELEC Forum?

Quote from excalibur

Ctrl + C

I tried that but terminal is not reacting, I can write what ever I like, no reaction.

Only ending the container using portainer gets me out of this

I tried LibreELEC:~/.kodi/addons/docker.linuxserver.swag/bin # docker.linuxserver.swag to see the output live but cannot exit when the starts fails. Only stopping via Portain GUI helps to exit it.

How can I exit docker.linuxserver.swag if the script fails/get stuck?

ANSWER

I have just figured it, is done with the above referenced simple bash script, so you enter

`/storage/.kodi/addons/docker.linuxserver.swag/bin/docker.linuxserver.swag`

Quote from excalibur

You can use systemctl :

systemctl start docker.linuxserver.swag

start

stop

restart

status

reload

reset-failed

...

Display More

oh thx, overlooked that answer
but it won't reload data from settings.xml?

Quote from elonesna

docker addon, this is a service

I'm referring to that one.

Any chance to start the different services (docker container) from the command line?

For example SWAG. I know that its settings are located in

/storage/.kodi/userdata/addon_data/docker.linuxserver.swag/settings.xml

and these are parsed to docker as coded in libreelec-addon-repo/docker.linuxserver.swag at master · linuxserver/libreelec-addon-repo (github.com).
I want to play around with swag: add support for additional args by aptalca · Pull Request #92 · linuxserver/libreelec-addon-repo (github.com) but via command line only.

Is it better explained now?

It does not work to switch LinuxServer dockers on and off from the WebGUI, how can I do it when I ssh into kodi?

Is there any command what does the same, when I switch on/off a docker on my TV?

FYI

the root cause is fixed https://github.com/portainer/portainer/issues/8455

sorry I have mistaken Portainer for Plex