I hope that this firmware will solve your issue. I think that you know how USB Burning Tool will recognize your device.
Posts by b_ignatov
-
-
I'm going to use this tuner on my Wetek Hub with some of the official releases of Libreelec.
-
This image is official Android 7.1 for Amlogic 905x devices(P212) . You have to flash it over USB burning tool.If you need the dtb file you can find it inside the archive file.
-
Just try this link
Download Android Nougat 7.1 firmware for Acemax U2+ TV Box - China Gadgets Reviews
If you have any problems I'll download it for you and share a link.
-
I have installed this version from your link. I didn't install the display drivers and everything run perfect. Your remote config file do not work for me. I have to generate a new one for my remote.
-
So...
I installed this libreelec version to my neighbor's GTC Box today.Everything run good.I did not install any display drivers.Do I need to do it, or may be they are included in this build?
-
I think this little bug will be cleared in the next official release and I hope, because I ordered the same Hauppauge tuner
-
Good to see that official LE builds support DVB drivers. Thanks for your great work and support.
-
I finally reflash my box with stock firmware, using USB Burning Tools. The problem was not in the firmware I used, but in the fact that the device was powered all the time with the usb cable and loaded libreelec from the internal memory. When I plugged in the hdmi cable to my TV to see what was happening, I realized that the device works only with power from the usb cable and not from the adapter. Because of this, the "toothpick" method did not work and the usb burning tool did not detect the device because it had already loaded libreelec. Then I tried the "toothpick" method again, before I plug the USB cable. Just hold the toothpick for couple seconds and my box was detected from USB Burning Tool. After that I choose my IMG file with stock android and flash it successfully. Everything works great now.... like a new one.
-
Card burn maker is a program to prepare your mSD card to boot the firmware and then to flash it. I boot to recovery with my prepared mSD Card and when the flash procedure start just gives an error after some time. That's why I think that my card is OK....but will try to prepare it with card burn maker too.
I'm not sure about the firmware!You are right. If the firmware is wrong may cause this issue and brick my device. After this error, my device boot Libreelec from Internel with factory data reset but is not bricked.
Very strange for me.
-
I already did it, but without any success yet.
-
Hi there,
I have Sunvell T95X box with Amlogic 905X 2/8GB and run LibreElec 7.0.3.012jon internel.I'm trying to revert back to stock firmware.Can someone help me to do this.I have trouble with USB Burning Tool to recognize my device.The "thootpick" method does not work for me and I'm not able to flash it.Also I've tried to flash the stock firmware as I folow instruction in Libreelec forum:
1.prepare a clean, FAT32-formatted SD card or USB drive
2.copy recovery.img and dtb.img from your Android firmware to SD card (don't use dtb.img for LE!)
3.use "toothpick" method to boot from SD card/USB drive or execute reboot recovery over SSH
When I do this the green Android starting the flash procedure and when start the ereasing gives an error.
Please someone to help me revert back to Stock Firmware.
Thanks in advane and good day to all. -
CE.8.95.7 has been released with some 4k video fixes.
-
We hope so.
New year, new wonders
-
Dear linch
Is there any chance, to get Internel tuners to work with Libreelec?
-
Thanks for your information!
HDHomerun is a good choice for network tune and there is no any drivers issues, but little expensive for me.
Now I'm thinking about Hauppaug WinTV-dualHD DVB-C/T2/T
I also see that there was some problems with the dual version's driver and I am not sure again that this tuner will work well on my Amlogic device
-
Hmm...strange for me.
I also have two TVHeadend servers, and I can access both of them with port forwarding outside my network. Are you sure that your router settings are correct?
-
If you need to access your TVHeadend server outside your local network, you can use port forwarding on your router.