Thanks for replying.
Does this mean this tuner won't work with libreELEC?
Posts by dnacore
-
-
Hi,
I'm using this USB tuner DVBWorld DW-2102 (linuxtv.org) and after checking dmesg it was recognized, but it says "no front end was attached by 'DVBWorld DVB-S 2102 USB2.0" (which is weird as clearly this is a DVB-S2 capable instead DVB-S). No adapters shows up on TVHeadend either and I wonder if there's more step I must do before giving up?
This is the logs from dmesg: http://ix.io/1i5h.
Code
Display More[ 0.000000] Booting Linux on physical CPU 0xf00 [ 0.000000] Linux version 4.19.23 (jenkins@tsuboi) (gcc version 8.2.0 (GCC)) #1 SMP Thu Feb 21 04:04:42 CET 2019 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B Rev 1.1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 8 MiB at 0x2f800000 [ 0.000000] On node 0 totalpages: 196608 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:63 [ 0.000000] random: get_random_bytes called from start_kernel+0xb0/0x4a8 with crng_init=0 [ 0.000000] percpu: Embedded 18 pages/cpu @(ptrval) s41036 r8192 d24500 u73728 [ 0.000000] pcpu-alloc: s41036 r8192 d24500 u73728 alloc=18*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 194880 [ 0.000000] Kernel command line: bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 boot=UUID=2901-3633 disk=UUID=b4dcdfde-4873-4c35-9e80-6506818fb1ce quiet root=/dev/ram0 rdinit=/init usbcore.autosuspend=-1 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 754560K/786432K available (9216K kernel code, 688K rwdata, 1988K rodata, 3072K init, 527K bss, 23680K reserved, 8192K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xb0800000 - 0xff800000 (1264 MB) [ 0.000000] lowmem : 0x80000000 - 0xb0000000 ( 768 MB) [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (3072 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 689 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 528 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 29545 entries in 87 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000010] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000024] Switching to timer-based delay loop, resolution 52ns [ 0.000351] Console: colour dummy device 80x30 [ 0.000385] console [tty0] enabled [ 0.000455] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000) [ 0.000483] pid_max: default: 32768 minimum: 301 [ 0.000804] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000830] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002439] Disabling memory control group subsystem [ 0.002499] CPU: Testing write buffer coherency: ok [ 0.003352] CPU0: update cpu_capacity 1024 [ 0.003371] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 [ 0.004528] Setting up static identity map for 0x100000 - 0x10003c [ 0.004790] rcu: Hierarchical SRCU implementation. [ 0.008259] smp: Bringing up secondary CPUs ... [ 0.009726] CPU1: update cpu_capacity 1024 [ 0.009740] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 [ 0.011374] CPU2: update cpu_capacity 1024 [ 0.011386] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02 [ 0.012855] CPU3: update cpu_capacity 1024 [ 0.012866] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03 [ 0.013074] smp: Brought up 1 node, 4 CPUs [ 0.013094] SMP: Total of 4 processors activated (153.00 BogoMIPS). [ 0.013105] CPU: All CPU(s) started in HYP mode. [ 0.013115] CPU: Virtualization extensions available. [ 0.014413] devtmpfs: initialized [ 0.029711] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.030086] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.030124] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.031089] pinctrl core: initialized pinctrl subsystem [ 0.032600] NET: Registered protocol family 16 [ 0.036654] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.043468] cpuidle: using governor ladder [ 0.043529] cpuidle: using governor menu [ 0.044208] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.044222] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.044528] Serial: AMBA PL011 UART driver [ 0.049574] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.102622] bcm2835-dma 3f007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1 [ 0.105376] SCSI subsystem initialized [ 0.105706] usbcore: registered new interface driver usbfs [ 0.105806] usbcore: registered new interface driver hub [ 0.105983] usbcore: registered new device driver usb [ 0.111955] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-02-12 19:46, variant start_x [ 0.114199] raspberrypi-firmware soc:firmware: Firmware hash is 8eff5e4023657a8b3b59e1f90dc966f62d74908c [ 0.119594] clocksource: Switched to clocksource arch_sys_counter [ 0.232879] FS-Cache: Loaded [ 0.248632] NET: Registered protocol family 2 [ 0.249696] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.249768] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.249889] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.250083] TCP: Hash tables configured (established 8192 bind 8192) [ 0.250299] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.250369] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.250824] NET: Registered protocol family 1 [ 0.251822] RPC: Registered named UNIX socket transport module. [ 0.251836] RPC: Registered udp transport module. [ 0.251847] RPC: Registered tcp transport module. [ 0.251859] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.437575] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.440815] Initialise system trusted keyrings [ 0.441130] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.454113] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.455215] FS-Cache: Netfs 'nfs' registered for caching [ 0.456337] NFS: Registering the id_resolver key type [ 0.456400] Key type id_resolver registered [ 0.456413] Key type id_legacy registered [ 0.456440] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.457016] FS-Cache: Netfs 'cifs' registered for caching [ 0.467894] Key type asymmetric registered [ 0.467913] Asymmetric key parser 'x509' registered [ 0.468014] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.468033] io scheduler noop registered (default) [ 0.468046] io scheduler deadline registered [ 0.468320] io scheduler cfq registered [ 0.468336] io scheduler mq-deadline registered [ 0.468349] io scheduler kyber registered [ 0.468572] io scheduler bfq registered [ 0.473024] BCM2708FB: allocated DMA memory 0xef840000 [ 0.473078] BCM2708FB: allocated DMA channel 0 [ 0.527235] Console: switching to colour frame buffer device 228x61 [ 0.564173] bcm2835-rng 3f104000.rng: hwrng registered [ 0.564452] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 0.565369] vc-sm: Videocore shared memory driver [ 0.585079] brd: module loaded [ 0.585299] loop: module loaded [ 0.618061] usbcore: registered new interface driver rtsx_usb [ 0.618083] Loading iSCSI transport class v2.0-870. [ 0.618864] iscsi: registered transport (tcp) [ 0.619668] libphy: Fixed MDIO Bus: probed [ 0.619741] tun: Universal TUN/TAP device driver, 1.6 [ 0.620199] usbcore: registered new interface driver lan78xx [ 0.620273] usbcore: registered new interface driver dm9601 [ 0.620357] usbcore: registered new interface driver smsc95xx [ 0.620425] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.648549] dwc_otg 3f980000.usb: base=(ptrval) [ 0.849023] Core Release: 2.80a [ 0.849043] Setting default values for core params [ 0.849087] Finished setting default values for core params [ 1.049553] Using Buffer DMA mode [ 1.049592] Periodic Transfer Interrupt Enhancement - disabled [ 1.049604] Multiprocessor Interrupt Enhancement - disabled [ 1.049617] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 1.049636] Dedicated Tx FIFOs mode [ 1.050509] WARN::dwc_otg_hcd_init:1049: FIQ DMA bounce buffers: virt = af854000 dma = 0xef854000 len=9024 [ 1.050550] FIQ FSM acceleration enabled for : [ 1.050550] Non-periodic Split Transactions [ 1.050550] Periodic Split Transactions [ 1.050550] High-Speed Isochronous Endpoints [ 1.050550] Interrupt/Control Split Transaction hack enabled [ 1.050567] dwc_otg: Microframe scheduler enabled [ 1.050651] WARN::hcd_init_fiq:457: FIQ on core 1 [ 1.050665] WARN::hcd_init_fiq:458: FIQ ASM at 80722400 length 36 [ 1.050680] WARN::hcd_init_fiq:484: MPHI regs_base at f0006000 [ 1.050791] dwc_otg 3f980000.usb: DWC OTG Controller [ 1.050848] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 1.050912] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000 [ 1.050967] Init: Port Power? op_state=1 [ 1.050978] Init: Power Port (0) [ 1.051496] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.051515] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.051532] usb usb1: Product: DWC OTG Controller [ 1.051547] usb usb1: Manufacturer: Linux 4.19.23 dwc_otg_hcd [ 1.051563] usb usb1: SerialNumber: 3f980000.usb [ 1.052528] hub 1-0:1.0: USB hub found [ 1.052613] hub 1-0:1.0: 1 port detected [ 1.053786] dwc_otg: FIQ enabled [ 1.053799] dwc_otg: NAK holdoff enabled [ 1.053811] dwc_otg: FIQ split-transaction FSM enabled [ 1.053830] Module dwc_common_port init [ 1.054288] usbcore: registered new interface driver usb-storage [ 1.054651] mousedev: PS/2 mouse device common for all mice [ 1.055251] i2c /dev entries driver [ 1.057719] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer [ 1.058215] bcm2835-cpufreq: min=600000 max=900000 [ 1.059089] sdhci: Secure Digital Host Controller Interface driver [ 1.059101] sdhci: Copyright(c) Pierre Ossman [ 1.060113] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe [ 1.060373] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.061289] ledtrig-cpu: registered to indicate activity on CPUs [ 1.061417] hidraw: raw HID events driver (C) Jiri Kosina [ 1.064223] usbcore: registered new interface driver usbhid [ 1.064232] usbhid: USB HID core driver [ 1.065127] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0 [ 1.067014] [vc_sm_connected_init]: start [ 1.076533] [vc_sm_connected_init]: end - returning 0 [ 1.078714] NET: Registered protocol family 10 [ 1.080066] Segment Routing with IPv6 [ 1.080155] NET: Registered protocol family 17 [ 1.080283] Key type dns_resolver registered [ 1.080541] Registering SWP/SWPB emulation handler [ 1.081379] Loading compiled-in X.509 certificates [ 1.092675] uart-pl011 3f201000.serial: cts_event_workaround enabled [ 1.092812] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2 [ 1.096937] sdhost: log_buf @ (ptrval) (ef853000) [ 1.144559] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 1.147107] console [netcon0] enabled [ 1.147119] netconsole: network logging started [ 1.147131] of_cfs_init [ 1.147203] of_cfs_init: OK [ 1.170106] Freeing unused kernel memory: 3072K [ 1.170358] Run /init as init process [ 1.229061] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.233862] mmc0: new high speed SDHC card at address aaaa [ 1.235372] mmcblk0: mmc0:aaaa SL08G 7.40 GiB [ 1.239462] mmcblk0: p1 p2 [ 1.269858] Indeed it is in host mode hprt0 = 00021501 [ 1.355292] random: fast init done [ 1.453010] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 1.453219] Indeed it is in host mode hprt0 = 00001101 [ 1.653336] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 1.653356] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.654136] hub 1-1:1.0: USB hub found [ 1.654235] hub 1-1:1.0: 5 ports detected [ 1.932975] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 2.023523] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 2.023543] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.026623] smsc95xx v1.0.6 [ 2.081173] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:ba:7e:3c [ 2.169805] usb 1-1.5: new high-speed USB device number 4 using dwc_otg [ 2.260353] usb 1-1.5: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 2 [ 2.260904] usb 1-1.5: New USB device found, idVendor=04b4, idProduct=2102, bcdDevice= 0.00 [ 2.260920] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.260932] usb 1-1.5: Product: EZ-USB FX2 [ 2.260943] usb 1-1.5: Manufacturer: Cypress [ 2.379475] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.579683] usb 1-1.4: new high-speed USB device number 5 using dwc_otg [ 2.675289] usb 1-1.4: New USB device found, idVendor=0781, idProduct=5595, bcdDevice= 1.00 [ 2.675309] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.675320] usb 1-1.4: Product: Ultra USB 3.0 [ 2.675332] usb 1-1.4: Manufacturer: SanDisk [ 2.675342] usb 1-1.4: SerialNumber: 4C531001401025105074 [ 2.676421] usb-storage 1-1.4:1.0: USB Mass Storage device detected [ 2.677884] scsi host0: usb-storage 1-1.4:1.0 [ 3.003986] systemd[1]: System time before build time, advancing clock. [ 3.020396] systemd[1]: systemd 239 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 3.020998] systemd[1]: Detected architecture arm. [ 3.025386] systemd[1]: Set hostname to <LibreELEC>. [ 3.311849] random: systemd: uninitialized urandom read (16 bytes read) [ 3.340037] systemd[1]: Listening on RPCbind Server Activation Socket. [ 3.340479] random: systemd: uninitialized urandom read (16 bytes read) [ 3.340582] systemd[1]: Reached target RPC Port Mapper. [ 3.340886] random: systemd: uninitialized urandom read (16 bytes read) [ 3.345307] systemd[1]: Starting Show Version... [ 3.347364] systemd[1]: Created slice User and Session Slice. [ 3.348942] systemd[1]: Listening on udev Control Socket. [ 3.349520] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.350457] systemd[1]: Listening on udev Kernel Socket. [ 3.575252] kernel-overlays-setup: setup base modules [ 3.681235] scsi 0:0:0:0: Direct-Access SanDisk Ultra USB 3.0 1.00 PQ: 0 ANSI: 6 [ 3.683423] sd 0:0:0:0: [sda] 492503040 512-byte logical blocks: (252 GB/235 GiB) [ 3.684597] sd 0:0:0:0: [sda] Write Protect is off [ 3.684621] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 3.685328] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3.695600] sda: sda1 [ 3.699121] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 3.724393] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.19.23 [ 3.791974] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware [ 3.792344] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays [ 3.793828] kernel-overlays-setup: processing conf /storage/.cache/kernel-overlays/50-driver.dvb.crazycat.conf [ 3.933845] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/driver.dvb.crazycat/lib/modules/4.19.23 [ 3.934115] kernel-overlays-setup: running depmod [ 8.143849] kernel-overlays-setup: done [ 8.147397] systemd[1]: Started Create kernel modules tree from overlays. [ 8.152667] systemd[1]: Starting Mounting swapfile... [ 8.158182] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.165113] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 8.171706] systemd[1]: Starting udev Coldplug all Devices... [ 8.178877] systemd[1]: Starting Setup machine-id... [ 8.193078] systemd[1]: Starting Load Kernel Modules... [ 8.197284] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 8.208259] systemd[1]: Started Remount Root and Kernel File Systems. [ 8.234331] systemd[1]: Started Load Kernel Modules. [ 8.513878] systemd-journald[203]: Received request to flush runtime journal from PID 1 [ 9.268097] random: crng init done [ 9.268122] random: 7 urandom warning(s) missed due to ratelimiting [ 10.534642] Console: switching to colour dummy device 80x30 [ 11.292180] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 11.302639] 8021q: 802.1Q VLAN Support v1.8 [ 11.744404] fuse init (API version 7.27) [ 12.322460] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 12.381354] media: loading out-of-tree module taints kernel. [ 12.385680] media: Linux media interface: v0.10 [ 12.418742] videodev: Linux video capture interface: v2.00 [ 12.418764] WARNING: You are using an experimental version of the media stack. [ 12.418764] As the driver is backported to an older kernel, it doesn't offer [ 12.418764] enough quality for its usage in production. [ 12.418764] Use it with care. [ 12.418764] Latest git patches (needed if you report a bug to [email protected]): [ 12.418764] b9ac0e830b87e363d357353ab54ae9f892bbd821 si2183: i2x_mutex in base. [ 12.440306] WARNING: You are using an experimental version of the media stack. [ 12.440306] As the driver is backported to an older kernel, it doesn't offer [ 12.440306] enough quality for its usage in production. [ 12.440306] Use it with care. [ 12.440306] Latest git patches (needed if you report a bug to [email protected]): [ 12.440306] b9ac0e830b87e363d357353ab54ae9f892bbd821 si2183: i2x_mutex in base. [ 12.451444] WARNING: You are using an experimental version of the media stack. [ 12.451444] As the driver is backported to an older kernel, it doesn't offer [ 12.451444] enough quality for its usage in production. [ 12.451444] Use it with care. [ 12.451444] Latest git patches (needed if you report a bug to [email protected]): [ 12.451444] b9ac0e830b87e363d357353ab54ae9f892bbd821 si2183: i2x_mutex in base. [ 12.458550] dvb-usb: found a 'DVBWorld DVB-S 2102 USB2.0' in cold state, will try to load a firmware [ 12.516046] dvb-usb: downloading firmware from file 'dvb-usb-dw2102.fw' [ 12.516074] dw2102: start downloading DW210X firmware [ 12.952005] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ 16.693523] dwc_otg: DEVICE:004 : update_urb_state_xfer_comp:747:trimming xfer length [ 16.799799] dvb-usb: found a 'DVBWorld DVB-S 2102 USB2.0' in warm state. [ 16.800480] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 16.805449] dvbdev: DVB: registering new adapter (DVBWorld DVB-S 2102 USB2.0) [ 16.805486] usb 1-1.5: media controller created [ 17.004107] dvb-usb: MAC address: 00:18:bd:00:88:8b [ 17.006759] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered. [ 27.786432] dvb-usb: no frontend was attached by 'DVBWorld DVB-S 2102 USB2.0' [ 27.849680] Registered IR keymap rc-dm1105-nec [ 27.850038] rc rc0: DVBWorld DVB-S 2102 USB2.0 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/rc/rc0 [ 27.850363] input: DVBWorld DVB-S 2102 USB2.0 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/rc/rc0/input0 [ 27.853500] rc rc0: lirc_dev: driver dw2102 registered at minor = 0, scancode receiver, no transmitter [ 27.853531] dvb-usb: schedule remote query interval to 150 msecs. [ 27.853561] dvb-usb: DVBWorld DVB-S 2102 USB2.0 successfully initialized and connected. [ 27.853926] usbcore: registered new interface driver dw2102