Posts by mr_d

mr_d · Early community images for H3, H6 and A64 mr_d March 22, 2019 at 7:56 PM

I add this in config file but nothing changed.

extlinux.conf:

LABEL LibreELEC

LINUX /KERNEL

FDT /sun8i-h3-orangepi-pc.dtb

APPEND boot=UUID=2103-3042 disk=UUID=f9d49f22-9a8c-4afe-9759-7d245eaf6197 console=ttyS0,115200 drm.edid_firmware=edid/1920x1080.bin

It seems to be a problem with the HDMI output. Are there any other options?

I changed sd card, power supply and HDMI cable, nothing helps.

mr_d · Early community images for H3, H6 and A64 mr_d March 22, 2019 at 7:21 PM

jernej

Thanks for your reply

This is the whole output when Orange pi pc is booting into libreelec.

output_serial_console.txt

At the last row output stops and is showing the cursor.

There is no output on HDMI, screen is blank. The green led on the board is on, the red led is off.

mr_d · Early community images for H3, H6 and A64 mr_d March 22, 2019 at 1:46 PM

I tried to install this and earlier images but the orange pi pc wont boot. I used several sd cards with no luck. An ubuntu 16.04 image is booting with no problems. So the orange pi pc should work.

This is the output from serial console

Any ideas?