Posts by Charlie_743

  • My Zotac MCE Remote stop working after 9.0.0 Update

    Hi

    Sorry for bad english.

    I have Zotac nano with built-in ITE8713CIR and Zotac MCE Remote.

    First used openelec, then migrated to Libreelec, the problems started with 8.2.5, but I just turned off the Libreelec settings/services lirc service and everything worked.

    After upgrade to 9.0.0 i can't off lirc. What do I do now, this function is no longer in the settings.

    I read theme My MCE remote stopped working, changes to lirc? and tried these advices, but nothing happened, the remote still don't work

    Now after clean install 9.0.0 i see this

    Code
    LibreELEC:~ # ir-keytable
Found /sys/class/rc/rc0/ (/dev/input/event5) with:
    Name: ITE8713 CIR transceiver
    Driver: ite-cir, table: rc-rc6-mce
    lirc device: /dev/lirc0
    Supported protocols: other lirc rc-5 rc-5-sz jvc sony nec sanyo mce_kbd rc-6 sharp xmp 
    Enabled protocols: lirc 
    bus: 25, vendor/product: 1283:0000, version: 0x0000
    Repeat delay = 500 ms, repeat period = 125 ms

    And this

    Code
    LibreELEC:~ # ir-keytable -t
Testing events. Please, press CTRL-C to abort.
69.361939: lirc protocol(rc6_6a_32): scancode = 0x80340459
69.468673: lirc protocol(rc6_6a_32): scancode = 0x80340459
70.571532: lirc protocol(rc6_6a_32): scancode = 0x8034845b
70.678315: lirc protocol(rc6_6a_32): scancode = 0x8034845b
71.228069: lirc protocol(rc6_6a_32): scancode = 0x80340458
71.333716: lirc protocol(rc6_6a_32): scancode = 0x80340458
71.766740: lirc protocol(rc6_6a_32): scancode = 0x8034845a
71.872466: lirc protocol(rc6_6a_32): scancode = 0x8034845a

    Help please :)