Posts by topix

LibreELEC (community) Version: 7.90.003
LibreELEC:~ # cat /flash/config.txt
################################################################################
#      This file is part of LibreELEC - http://www.libreelec.tv
#      Copyright (C) 2016 Team LibreELEC
#
#  LibreELEC is free software: you can redistribute it and/or modify
#  it under the terms of the GNU General Public License as published by
#  the Free Software Foundation, either version 2 of the License, or
#  (at your option) any later version.
#
#  LibreELEC is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#  GNU General Public License for more details.
#
#  You should have received a copy of the GNU General Public License
#  along with LibreELEC.  If not, see <http://www.gnu.org/licenses/>.
################################################################################
# Bootloader configuration - config.txt
################################################################################


################################################################################
# Memory (System/GPU configuration )
################################################################################


# Default GPU memory split (do not change if you do not know what you are doing)
  gpu_mem=128


# Configure GPU memory based on SDRAM size - overrides above setting
  gpu_mem_256=112
  gpu_mem_512=160
  gpu_mem_1024=256


################################################################################
# For overclocking and various other settings, see:
# https://www.raspberrypi.org/documentation/configuration/config-txt.md
################################################################################
# Set 'force_turbo=1' to disable dynamic overclocking and enable overclocking always.
force_turbo=0


# Make display smaller to stop text spilling off the screen
#
# Note that the overscan settings only affect the splash screen and not Kodi.
#
# If you experience overscan/underscan issues the best solution is to adjust
# your TV settings ("full pixel", "1-1 pixel" etc.). Alternatively, there is a
# calibration menu in the Kodi GUI.
# disable_overscan=1


# Force HDMI even if unplugged or powered off
# hdmi_force_hotplug=1


# Doesn't sent initial active source message.
# Avoids bringing CEC (enabled TV) out of standby and channel switch when
# rebooting.
hdmi_ignore_cec_init=1


################################################################################
# License keys to enable GPU hardware decoding for various codecs
# to obtain keys visit the shop at http://www.raspberrypi.com
################################################################################


# decode_MPG2=0x00000000
# decode_WVC1=0x00000000


################################################################################
# End of default configuration
################################################################################


################################################################################
# Include distribution specific config file if it exists.
################################################################################
[all]
include distroconfig.txt
dtoverlay=hifiberry-digi
dtdebug=1
LibreELEC:~ # aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: sndrpihifiberry [snd_rpi_hifiberry_digi], device 0: HifiBerry Digi HiFi wm8804-spdif-0 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
LibreELEC:~ # aplay -L
null
    Discard all samples (playback) or generate zero samples (capture)
default:CARD=sndrpihifiberry
    snd_rpi_hifiberry_digi,
    Default Audio Device
sysdefault:CARD=sndrpihifiberry
    snd_rpi_hifiberry_digi,
    Default Audio Device
LibreELEC:~ # dtoverlay hifiberry-digi
LibreELEC:~ # aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: sndrpihifiberry [snd_rpi_hifiberry_digi], device 0: HifiBerry Digi HiFi wm8804-spdif-0 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
LibreELEC:~ # aplay -L
null
    Discard all samples (playback) or generate zero samples (capture)
default:CARD=sndrpihifiberry
    snd_rpi_hifiberry_digi,
    Default Audio Device
sysdefault:CARD=sndrpihifiberry
    snd_rpi_hifiberry_digi,
    Default Audio Device
LibreELEC:~ #