Posts by srmendi

    Again have you installed my S905 image without modifications and entered the following into a terminal:

    Code
    systemctl stop kodi
    systemctl stop eventlircd
    ir-keytable -t

    Now press buttons on your remote and make a note of the keycodes in notepad if there is an output.

    i try it and in kodi the ir dont work, but in putty i putt your commands and the ir works well see

    login as: root

    root@libreelec's password:

    ##############################################

    # LibreELEC 9.0 Reborn Remix #

    # https://goo.gl/temeuw #

    # based on LibreELEC – Just enough OS for KODI #

    ##############################################

    LibreELEC (5schatten): RR-201845-f38db5f (S905.arm)

    LibreELEC:~ # systemctl detener kodi

    Unknown operation detener.

    LibreELEC:~ # systemctl stop kodi

    LibreELEC:~ # systemctl stop eventlircd

    LibreELEC:~ # ir-keytable -t

    Testing events. Please, press CTRL-C to abort.

    290.637758: event type EV_MSC(0x04): scancode = 0x06

    290.637758: event type EV_SYN(0x00).

    291.808582: event type EV_MSC(0x04): scancode = 0x16

    291.808582: event type EV_SYN(0x00).

    292.422415: event type EV_MSC(0x04): scancode = 0x5a

    292.422415: event type EV_SYN(0x00).

    293.128919: event type EV_MSC(0x04): scancode = 0x1b

    293.128919: event type EV_SYN(0x00).

    293.983901: event type EV_MSC(0x04): scancode = 0x1a

    293.983901: event type EV_SYN(0x00).

    295.265027: event type EV_MSC(0x04): scancode = 0x13

    295.265027: event type EV_SYN(0x00).

    295.878421: event type EV_MSC(0x04): scancode = 0x17

    295.878421: event type EV_SYN(0x00).

    296.695877: event type EV_MSC(0x04): scancode = 0x15

    296.695877: event type EV_SYN(0x00).

    297.310022: event type EV_MSC(0x04): scancode = 0x55

    297.310022: event type EV_SYN(0x00).

    298.425651: event type EV_MSC(0x04): scancode = 0x52

    298.425651: event type EV_SYN(0x00).

    298.871993: event type EV_MSC(0x04): scancode = 0x50

    298.871993: event type EV_SYN(0x00).

    299.336983: event type EV_MSC(0x04): scancode = 0x10

    299.336983: event type EV_SYN(0x00).

    299.783242: event type EV_MSC(0x04): scancode = 0x56

    299.783242: event type EV_SYN(0x00).

    300.099788: event type EV_MSC(0x04): scancode = 0x54

    300.099788: event type EV_SYN(0x00).

    300.397817: event type EV_MSC(0x04): scancode = 0x14

    300.397817: event type EV_SYN(0x00).

    301.214995: event type EV_MSC(0x04): scancode = 0x4e

    301.214995: event type EV_SYN(0x00).

    301.740098: event type EV_MSC(0x04): scancode = 0x4c

    301.740098: event type EV_SYN(0x00).

    302.027306: event type EV_MSC(0x04): scancode = 0x0c

    302.027306: event type EV_SYN(0x00).

    302.473681: event type EV_MSC(0x04): scancode = 0x18

    302.473681: event type EV_SYN(0x00).

    302.845840: event type EV_MSC(0x04): scancode = 0x0f

    302.845840: event type EV_SYN(0x00).

    303.384755: event type EV_MSC(0x04): scancode = 0x51

    303.384755: event type EV_SYN(0x00).

    305.685014: event type EV_MSC(0x04): scancode = 0x0d

    305.685014: event type EV_SYN(0x00).

    306.261371: event type EV_MSC(0x04): scancode = 0x11

    306.261371: event type EV_SYN(0x00).

    306.745068: event type EV_MSC(0x04): scancode = 0x4d

    306.745068: event type EV_SYN(0x00).

    307.098623: event type EV_MSC(0x04): scancode = 0x02

    307.098623: event type EV_SYN(0x00).

    307.489380: event type EV_MSC(0x04): scancode = 0x01

    307.489380: event type EV_SYN(0x00).

    307.970021: event type EV_MSC(0x04): scancode = 0x04

    307.970021: event type EV_SYN(0x00).

    308.208700: event type EV_MSC(0x04): scancode = 0x1f

    308.208700: event type EV_SYN(0x00).

    308.506735: event type EV_MSC(0x04): scancode = 0x44

    308.506735: event type EV_SYN(0x00).

    308.841815: event type EV_MSC(0x04): scancode = 0x46

    308.841815: event type EV_SYN(0x00).

    309.473477: event type EV_MSC(0x04): scancode = 0x4a

    309.473477: event type EV_SYN(0x00).

    309.900023: event type EV_MSC(0x04): scancode = 0x48

    309.900023: event type EV_SYN(0x00).

    310.290023: event type EV_MSC(0x04): scancode = 0x0b

    310.290023: event type EV_SYN(0x00).

    310.669192: event type EV_MSC(0x04): scancode = 0x08

    310.669192: event type EV_SYN(0x00).

    Ok i follow the guide and works perfectly!!! thanks :D

    I had some advices about remote config in mind ^^ So if you know if mecool remotes are supported by upstream for example.

    As your tv box is no Khadas VIM you should not use this build. Stick to the S905 builds and try this file https://github.com/alexelec/s905-trees/tree/master/s905d as I already mentioned.

    Hi re, i tried now that dtb, but stucks in logo mecool, if i want run libreelec, i only can run it using the dtb that are in the folder device tree, when image was created, but dont work the ir remote.

    Any more idea?

    thanks

    Have you checked out this thread? LE9.0 remote configs ir-keytable Amlogic devices

    It says:

    So you made sure that your remote is working & it is not detected? Infrared Remotes [LibreELEC.wiki] I guess the dtb is only needed if your remote isn't detected at all. Maybe this dtb file works though https://github.com/alexelec/s905-trees/tree/master/s905d /shrug

    HiassofT  CvH any hints about that?

    Yes, i view this thread, but i dont know where find the update device tree :(

    I used the one already included in the Khadas vim image. Just wrote it to an sd card popped in the K1 Pro and booted first time. There is a dedicated dtb for the k1 pro and have used it for other libreelec images. I also have a wetek play 2 so will try it at some time.

    Any idea if Amiga CD32 is working with your build ?

    Where can i find dtb?

    I tried the bulild Amlogic S905 | builds for common S905 devices but original remote controller dont works only can move with keyboard or mouse

    I view your post and i try burn build khadas .img.gz, and no dtb folder, the only way to boot is getting the dtb from the amlogic s905 build, with the same issue from remote controller ( dont works only can move with keyboard or mouse )

    If u can send me a link for download your working gxl_p230_k1_pro.dtb

    Thanks