CvH just realized that you did the Crazy cat builds.
I've read the DVB issue since LE switched to kernel 4.9.x post, and am having the continuity errors.
Could you update the build with the 8.2.3/4.8 kernel?
Posts by wbrco
-
-
Additional - thought about this after I clicked reply:
HomePVR:~ # lsmod
Module Size Used by
rc_hauppauge 16384 0
em28xx_rc 20480 0
rc_core 36864 3 em28xx_rc,rc_hauppauge
si2157 20480 2
lgdt3306a 28672 2
i2c_mux 16384 1 lgdt3306a
em28xx_dvb 36864 32
dvb_core 131072 1 em28xx_dvb
videobuf2_vmalloc 16384 1 dvb_core
videobuf2_memops 16384 1 videobuf2_vmalloc
videobuf2_common 45056 1 dvb_core
8021q 24576 0
intel_powerclamp 16384 0
intel_soc_dts_thermal 16384 0
intel_soc_dts_iosf 16384 1 intel_soc_dts_thermal
em28xx 86016 2 em28xx_rc,em28xx_dvb
tveeprom 24576 1 em28xx
v4l2_common 16384 1 em28xx
videodev 167936 2 v4l2_common,videobuf2_common
media 32768 4 videodev,si2157,dvb_core,em28xx
snd_hda_codec_hdmi 49152 1
snd_hda_intel 36864 3
snd_hda_codec 106496 2 snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 16384 1 snd_hda_codec
snd_hda_core 65536 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
pcc_cpufreq 16384 0
-
Having similar issues: Still lots of continuity errors. Signal strength and SNR both good.
I went from CrazyCat's 8 builds to the Alpha because of this.
LibreELEC (official): 8.90.006 (Generic.x
HomePVR:~ # uname -r
4.18.11
Hauppauge Win DualHD USB (I'm in USA, so ATSC..)
HTS Tvheadend 4.2.6-62 ~ LibreELEC Tvh-addon v9.0.116
hastebin Kodi Log File.
For some reason dmesg isn't found..
Hardware - Lanner Electronics NCA-1010 E3825 CPU
HomePVR:/var/log # lsusb -v -d 2040:826d
Bus 001 Device 002: ID 2040:826d Hauppauge
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x2040 Hauppauge
idProduct 0x826d
bcdDevice 1.00
iManufacturer 3 HCW
iProduct 1 955D
iSerial 2 0014043801
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 55
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0000
(Bus Powered)
HomePVR:/var/log #