Posts by Da Flex

Aug 27 07:07:41.915077 LibreELEC kernel: usb usb1-port2: Cannot enable. Maybe the USB cable is bad?

Please try without the USB hub.

We have similar case here: Click! In short: Very few TV's produce a very long CEC initialization time since LE 10+. No solution so far.

Quote from carsten888

I installed LE9 from scratch and all is working wonderfull again.

Quote from Da Flex

You have to install LE 10+ from scratch instead.

If you want to build your own LE, open a new thread at Development section. We also have basic Wiki instructions.

No idea, and nobody will do this for you. Easiest workaround: Install Raspberry Pi OS, and autostart Kodi on it. So you'll get JACK.

Quote from lich000king

Hm, why would I need JACK if the thing works fine in ALSA?

The audio interface provides a ton of ins and out, without any standard, how to route them to a speaker system. I guess that's why the ALSA driver only provides an API for JACK. JACK is the expert for connection management.

"aplay" makes an assumption about connections, and that worked. Kodi wants to do it right, and asks the driver for input channels. The answer is NULL (see post #8), because JACK should answer instead.

My Behringer UMC22 has two ins, and two outs. In that case stereo routing is obvious, and that works for Kodi.

Current theory: The driver was loaded OK, but you need JACK to configure ins and outs of the audio interface.

Ardour has JACK, because it's made for musicians, LE doesn't. UMC1820 configuration for JACK: Click!

Sorry, we don't support JACK.

We support it, we just have other things to do sometimes.

2023-02-16 18:11:52.194 T:1375     info <general>:     Device 1
2023-02-16 18:11:52.194 T:1375     info <general>:         m_deviceName      : @:CARD=UMC1820,DEV=0
2023-02-16 18:11:52.194 T:1375     info <general>:         m_displayName     : UMC1820
2023-02-16 18:11:52.194 T:1375     info <general>:         m_displayNameExtra: Analog
2023-02-16 18:11:52.194 T:1375     info <general>:         m_deviceType      : AE_DEVTYPE_PCM
2023-02-16 18:11:52.194 T:1375     info <general>:         m_channels        : NULL
2023-02-16 18:11:52.194 T:1375     info <general>:         m_sampleRates     : 48000
2023-02-16 18:11:52.194 T:1375     info <general>:         m_dataFormats     : AE_FMT_S24NE3
2023-02-16 18:11:52.194 T:1375     info <general>:         m_streamTypes     : No passthrough capabilities
2023-02-16 18:11:52.194 T:1375     info <general>:     Device 2
2023-02-16 18:11:52.194 T:1375     info <general>:         m_deviceName      : iec958:CARD=UMC1820,DEV=0
2023-02-16 18:11:52.194 T:1375     info <general>:         m_displayName     : UMC1820
2023-02-16 18:11:52.194 T:1375     info <general>:         m_displayNameExtra: S/PDIF
2023-02-16 18:11:52.194 T:1375     info <general>:         m_deviceType      : AE_DEVTYPE_IEC958
2023-02-16 18:11:52.194 T:1375     info <general>:         m_channels        : NULL
2023-02-16 18:11:52.194 T:1375     info <general>:         m_sampleRates     : 44100,48000,88200,96000
2023-02-16 18:11:52.195 T:1375     info <general>:         m_dataFormats     : AE_FMT_RAW,AE_FMT_S24NE3
2023-02-16 18:11:52.195 T:1375     info <general>:         m_streamTypes     : STREAM_TYPE_AC3,STREAM_TYPE_DTSHD_CORE,STREAM_TYPE_DTS_1024,STREAM_TYPE_DTS_2048,STREAM_TYPE_DTS_512

Channels are "NULL" for both output options. I think the "aplay" creates two stereo channels, but Kodi tries to use the channels, provided by the audio interface.

"Device 2" has passthrough capabilities. Please try the passthrough option in LE's audio settings.

Quote from REXus

Tomorrow. But probably everything is exactly the same.

chewitt has just informed me that he found his C2 board. So the log is not necessary anymore.

With that extra C2 board I'm optimistic.

Quote from REXus

Nothing changed in sound playing - "crack" then no data when passthough enabled, stereo when disabled.

Your version has broken my GPIO script started from autostart.sh (power on speakers when TV is on etc.), so I've turned back to official one.

Can you please go back to chewitt build, activate debug logging, replicate the issue, and post a link to the log?

I'm curious whether the missing data formats are available on that build:

• AE_FMT_S24NE3
• AE_FMT_S32NE
• AE_FMT_S16BE
• AE_FMT_U8

Nah, you can't update from LE 9 to LE 10+, because it generates errors. You have to install LE 10+ from scratch instead.

Did you installed from scratch?

Behringer UMC22 (ASIO conform) works fine here (RPi3B+). Which driver do you use at your music production OS? I bet it's not ASIO.

I got feedback from a dev. It seems like the Samsung UE40H6470 has an issue. Read this:

Samsung TV not reacting on CEC command - Ubuntu Mate 16.04 Raspberry Pi 2 · Issue #366 · Pulse-Eight/libcec

Setup: Samsung TV UE40H6470 Raspberry Pi 2 Model B connected via HDMI cable Installed libcec by the instructions from here: So a work-around that worked for me…

github.com

Thanks! That's important info. I gave our devs a ping.

I think rosede means the frequency settings in the router menu. I also have such options.

You can wait another year, but I don't think it will fix the problem. I'm familiar with RPi issues, because I'm reading the forum all the time. To my knowledge, you're the only one with such an issue.

Any chance to try the RPi on another TV? Maybe your TV is defective (see post #8).