Posts by Da Flex

2024-02-11 13:52:21.183 T:1119     info <general>: CDVDVideoCodecDRMPRIME::Open - using decoder V4L2 mem2mem H.264 decoder wrapper
2024-02-11 13:52:21.183 T:1119     info <general>: CDVDVideoCodecDRMPRIME::Open - unable to open codec
2024-02-11 13:52:21.184 T:1119     info <general>: CDVDVideoCodecDRMPRIME::Open - using decoder H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10
2024-02-11 13:52:21.197 T:1119    error <general>: CDVDVideoCodecDRMPRIME::FilterOpen - avfilter_graph_config:  Invalid argument (-22)

Disable DRM Prime.

Quote from kapqa

well, if it aint used, it wont consume much ram, i suppose.

Nah, on analog audio, there is no chance to detect usage, so it's always on or off.

To safe RAM storage, developers only activate necessary drivers. Analog audio is not very common, so they don't load that driver by default.

Quote from milhaus2000

Command "tvservice -s" results "state 0x6 [DVI CUSTOM RGB full 4:3], 1024x768 @ 60.00Hz, progressive"

So you're missing some HDMI modes, right? The reason could be bad communication over HDMI.

Check your HDMI cable. It should be conform to HDMI 2.0 or 2.1 standard.

Quote from bam

I want to use HAT on RPi4, but on Android TV.

Wrong forum. Closed.

Network issues:

2024-02-10 13:47:32.922 T:1336  warning <general>: OutputPicture - timeout waiting for buffer
2024-02-10 13:47:40.489 T:1337     info <general>: Skipped 147 duplicate messages..
2024-02-10 13:47:40.489 T:1337     info <general>: CVideoPlayerAudio::Process - stream stalled
2024-02-10 13:47:40.498 T:1328    debug <general>: CVideoPlayer::HandlePlaySpeed - audio stream stalled, triggering re-sync

Most USB DACs are also cheap. Search for "RPi USB DAC" on this forum, because a proper driver is needed.

I successfully tried the Behringer UMC22 on my RPi3B+, but there are cheaper options.

Quote from kapqa

why is this no longer activated by standard?

Audio quality is low, so analog users prefer HiFiBerry HATs these days.

Thx. No obvious errors. You're still at log level 0:

2024-02-09 19:29:02.418 T:1056     info <general>: Disabled debug logging due to GUI setting. Level 0.

Use this advancedsettings.xml for log level 1:

<?xml version="1.0" encoding="utf-8" ?>
<advancedsettings version="1.0">
	<loglevel hide="true">1</loglevel>                                            
</advancedsettings>

Not sure, what to do next. Provide another log at log level 1. Maybe we'll find more details then.

That message is harmless.

1. Activate log level 1 by creating an advancedsettings.xml file.
2. Reboot.
3. Login by SSH, run pastekodi, and post the resulting URL.

You're still at log level 0. Use log level 1 or 2.

2024-02-07 21:25:10.143 T:841      info <general>: Disabled debug logging due to GUI setting. Level 0.

The cmdline.txt from RPi4 has the default settings, so in theory you don't need extra options on RPi5, except SSH.

Please install the LE image again on microSD. This time use Balena Etcher. It does verification after writing.

Do you use the HDMI-0 port of RPi5? That's the one near to the USB-C port.

It's a pretty new device, so it's not unexpected.

1. Login by SSH, and open the file cmdline.txt. It works similar to config.txt.
2. Append vc4.force_hotplug=1 to the end of the line.
3. Store that file, and reboot.

I beliefe there is a "sync to display" option somewhere (video settings or gear icon on playback bar). Can you try that?

Zewkin On which build the issue started to happen? It could help to narrow it down.