Posts by Da Flex

A little research says that "HDMI High-Speed" is lower than HDMI 2.0. Because you have several "display reset" messages on your logs, I highly recommend to use an "HDMI Premium High-Speed" cable, which is available as HDMI 2.0 or HDMI 2.1 variant.

Thanks, the error is visible!

2021-11-08 18:53:06.185 T:1106    DEBUG <general>: CActiveAESink::OpenSink - ALSA Initialized:
2021-11-08 18:53:06.185 T:1106    DEBUG <general>:   Output Device : Wireless Stereo Headset
2021-11-08 18:53:06.185 T:1106    DEBUG <general>:   Sample Rate   : 48000
2021-11-08 18:53:06.185 T:1106    DEBUG <general>:   Sample Format : AE_FMT_S16NE
2021-11-08 18:53:06.185 T:1106    DEBUG <general>:   Channel Count : 2
2021-11-08 18:53:06.185 T:1106    DEBUG <general>:   Channel Layout: FL, UNKNOWN1

I'll ping a dev...

Thanks for testing! Hmm, this headset is pretty unusual, so it could be a driver issue. To be sure, we need a log file.

Sounds like an HDMI-CEC problem. Check the CEC adapter settings on LE's input device settings. Maybe one of those settings was resetted during the LE update.

Thanks. Could be a DRM Prime issue:

2021-11-07 23:33:02.876 T:942     DEBUG <general>: SeekTime - seek ended up on time 1840339
2021-11-07 23:33:02.876 T:942     DEBUG <general>: CVideoPlayer::FlushBuffers - flushing buffers
2021-11-07 23:33:02.876 T:950     DEBUG <general>: CDVDAudio::Pause - pausing audio stream
2021-11-07 23:33:02.876 T:949     DEBUG <general>: CDVDVideoCodecDRMPRIME::Reset - flush buffers
2021-11-07 23:33:02.876 T:949     DEBUG <general>: CVideoPlayerVideo - CDVDMsg::GENERAL_SYNCHRONIZE
2021-11-07 23:33:02.876 T:950     DEBUG <general>: CVideoPlayerAudio - CDVDMsg::GENERAL_SYNCHRONIZE
2021-11-07 23:33:02.876 T:942     DEBUG <general>: CVideoPlayer::SetCaching - caching state 1
2021-11-07 23:33:02.876 T:950     DEBUG <general>: CDVDAudio::Pause - pausing audio stream
2021-11-07 23:33:02.876 T:942     DEBUG <general>: CDVDClock::SetSpeedAdjust - adjusted:0.000000
2021-11-07 23:33:02.876 T:942     DEBUG <general>: Prepare - starting demuxer from: 1841000
2021-11-07 23:33:02.878 T:822     DEBUG <general>: CWinSystemGbmGLESContext::PresentRender - Sending display reset to all clients
2021-11-07 23:33:02.878 T:822      INFO <general>: VideoPlayer: OnResetDisplay received
2021-11-07 23:33:02.878 T:950     DEBUG <general>: CVideoPlayerAudio - CDVDMsg::GENERAL_PAUSE: 0
2021-11-07 23:33:02.878 T:949     DEBUG <general>: CVideoPlayerVideo - CDVDMsg::GENERAL_PAUSE: 0
2021-11-07 23:33:02.926 T:942     DEBUG <general>: CVideoPlayer::HandleMessages - player 2 reported state: 0
2021-11-07 23:33:02.926 T:842     DEBUG <general>: OnAVChange: CApplication::OnAVChange
2021-11-07 23:33:02.926 T:942     DEBUG <general>: CVideoPlayer::HandleMessages - player 1 reported state: 0
2021-11-07 23:33:02.945 T:942     DEBUG <general>: CheckPlayerInit - dropping packet type:2 dts:1840339000.000000 to get to start point at 1841000000.000000
2021-11-07 23:33:02.945 T:949     DEBUG <general>: CVideoPlayerVideo - Stillframe left, switching to normal playback
2021-11-07 23:33:02.951 T:942     DEBUG <general>: CheckPlayerInit - dropping packet type:1 dts:1840338000.000000 to get to start point at 1841000000.000000
2021-11-07 23:33:02.988 T:942      INFO <general>: Skipped 74 duplicate messages..

I'll ping a dev...

Quote from chewitt

Start by writing the dw-hdmi kernel driver code to support S/PDIF output. Finish by connecting the cable. Add "lots of dev stuff" in the middle

What he is trying to say: Buy an HDMI audio extractor, or a USB sound card.

PS: The current log says that LE can't handle dtsHD correctly:

2021-11-07 18:09:40.470 T:949      INFO <general>: CAEStreamParser::SyncDTS - dtsHD MA stream detected (8 channels, 48000Hz, 16bit BE, period: 8192, syncword: 0x41a29547, target rate: 0x18, framesize 2100))
2021-11-07 18:09:40.470 T:949      INFO <general>: CVideoPlayerAudio: display reset occurred, checking for passthrough
2021-11-07 18:09:40.470 T:949      INFO <general>: Creating audio stream (codec id: 86020, channels: 8, sample rate: 48000, pass-through)
2021-11-07 18:09:40.472 T:830      INFO <general>: CActiveAESink::OpenSink - initialize sink
2021-11-07 18:09:40.472 T:830      INFO <general>: CAESinkALSA::Initialize - Attempting to open device "hdmi:CARD=vc4hdmi0,DEV=0"
2021-11-07 18:09:40.476 T:949     ERROR <general>: CAEStreamInfo::GetDuration - invalid stream type
2021-11-07 18:09:40.478 T:830      INFO <general>: Skipped 1 duplicate messages..

The "display reset" is weired. Maybe your HDMI cable doesn't support high data rate, which is definitely the case when playing 4K / dtsHD. Make sure your HDMI cable is conform to HDMI 2.0 / 2.1 standard.

You're still at log level 0. So...

Same issue when using the default skin?

Quote from Cris_

Whats is the difference between 1920x1080M@60 and with 60D? Deinterlacing?

Is somewhere more information about cmdline.txt?

Quote from cmdline.txt

‘D’ will force the display to be enabled and use digital output. This is useful for outputs that have both analog and digital
signals (e.g. HDMI and DVI-I).

Did you set LE's audio settings to expert mode? That will offer additional tweaks - search for sampling rate.

Proteuxs Please only use English language.

Compatibility reasons. Just do what we said.

gedakc Good point. Should be doable with GParted, too.

Better connect your drive to a PC, and use GParted to enlarge the second partition.

Thanks for testing. Then advancedsettings.xml is OK, because it's the system default variant. Maybe graphics driver issue:

2021-11-02 13:43:13.722 T:834     ERROR <general>: libva error: /usr/lib/dri/iHD_drv_video.so init failed

PS: Freezers seem to be a known issue on Intel N3700: Click!

Quote from menkalos

I have made NO changes to the Config.txt file, and this is an unmodified RPi4 that runs the old 9.2 image just fine.

That's a problem. Since LE 10 video settings have been moved from config.txt to cmdline.txt. New syntax here: Click!

Remove the <video><latency> content from advancedsettings.xml.