Posts by Zuma

In fact, I did not notice a big difference in colors when playing the video in terms of colors

The only difference in Kodi interface is that it looks like it's not as deep color as the build LE10.0.1

Is there hope in the future to support HDR for 4K 50/60Hz ?

Quote from smp

LibreELEC-Generic.x86_64-11.0-devel-20211020222733-d3745e7.img.gz

This is from Oct. 20 master branch (Kodi 20) with the Atmos patch included.

Hi

my hardware is:

Z390 Phantom Gaming-ITX/ac

CPU 8700K

intel UHD 630

LG OLD C7

Pioneer SC-LX704 | AV Receivers

...

my bord Supports HDMI 2.0 with max. resolution up to 4K x 2K (4096x2160) @ 60Hz & Supports HDR with HDMI 2.0

i use build "smp" for HDR , and HDR working via 4K & 23Hz & or 1080p & 60Hz and color: 36bit OK

but color set 24bit if i use 4K & 60/50Hz

and no HDR for PVR DVB Addon

my questions:

1- Is the limitation from hardware or software?

2- Is there a way to change RGB color to YCbCr?

3- Why is the Kodi-20 interface is 24 colors and not 36 colors as in Kodi-19?

my issue from battery motherboard

fixed

ok

after reboot

working fine

LibreELEC:~ # lspci
00:00.0 Host bridge: Intel Corporation 8th Gen Core Processor Host Bridge/DRAM Registers (rev 07)
00:01.0 PCI bridge: Intel Corporation 6th-9th Gen Core Processor PCIe Controller (x16) (rev 07)
00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 630 (Desktop)
00:12.0 Signal processing controller: Intel Corporation Cannon Lake PCH Thermal Controller (rev 10)
00:14.0 USB controller: Intel Corporation Cannon Lake PCH USB 3.1 xHCI Host Controller (rev 10)
00:14.2 RAM memory: Intel Corporation Cannon Lake PCH Shared SRAM (rev 10)
00:14.3 Network controller: Intel Corporation Wireless-AC 9560 [Jefferson Peak] (rev 10)
00:16.0 Communication controller: Intel Corporation Cannon Lake PCH HECI Controller (rev 10)
00:17.0 SATA controller: Intel Corporation Cannon Lake PCH SATA AHCI Controller (rev 10)
00:1b.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port (rev f0)
00:1f.0 ISA bridge: Intel Corporation Z390 Chipset LPC/eSPI Controller (rev 10)
00:1f.3 Audio device: Intel Corporation Cannon Lake PCH cAVS (rev 10)
00:1f.4 SMBus: Intel Corporation Cannon Lake PCH SMBus Controller (rev 10)
00:1f.5 Serial bus controller [0c80]: Intel Corporation Cannon Lake PCH SPI Controller (rev 10)
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (7) I219-V (rev 10)

LE10.0.1

Hi

How add support driver for Ethernet (Giga PHY Intel^® I219V ) in  Z390 Phantom Gaming-ITX/ac ?

Hi

what about for Intel Z390

ASRock > Z390 Phantom Gaming-ITX/ac

is HLG - HDR+ - Dolby Vision working?

Hi

i have some issue after try on KIII pro :

Sound 7.1 & No Network & No wifi & No BT

Pasteboard - Uploaded Image

what's wrong?

i set dtb in txt file:

meson-gxm-mecool-kiii-pro.dtb

Quote from win32x86

I just want to report that LibreELEC-ARMv7.arm-9.80-devel-20210117165740-d174eba-rk3188.img.gz is partially working on minix neo x7. There are problems with network connections (no wifi and no ethernet interface) and other little things to adjust ( eg. reboot is not working properly), but audio and video are working fine (I couldn't test everything properly because of the size of my sd card, but I plan to connect an hard disk this weekend and make more tests). Let me know if I can be of any help in this project.

Thank you

Hi

i have minix neo x7 & Wasser rom

Can you explain the steps to run the LibreELEC on the minix neo x7 ?

is there bootloader for libreelec to boot from sd ?

as here:

Linuxium's Bootloader software to dual boot Android and Linux - Linuxium

Quote from balbes150

It will not work with USB, only with an SD card (but there is no guarantee that your model is supported).

i try it via sd card , but not boot

i use on android "Lollipop - wasser firmware 3.0.6 for Minix Neo X7"

what can i do?

Quote from balbes150

Good news.

Working version of Libreelec for rk3188 (thanks to knaerzche for providing the source code). I tested it on my UT2 (rk3188). I wrote the image to the SD card, connected it to UT2, and the system automatically started. Works with HDMI audio and HW acceleration for video (not all formats are supported yet). My LAN hasn't worked yet. Important - now there is a working version of the kernel and u-boot for rk3188, I hope to build a version of Armbian with these sources in the near future.

Thank you to knaerzche for the work done to add support for rk3188 with a modern kernel and u-boot.

20201226-rk3188 — Yandex.Disk

Great!

i have Minix Neo X7

how install in usb ?

Hi balbes150

can you rebuild dtb.img for box : Dune HD Sky plus "S905D" ?

here info box : Dune HD Media Player - Dune HD Sky 4K Plus | Dune HD

here dtb android in firmware : Dune Firmware Zone / Dune HD Sky 4K Plus

hi all

i want help for Dune HD Sky 4K Plus : S905D

here "dtb.img" from Android Firmware

Quote from kostaman

Did you try gxl_p231_2g_dvb.dtb

Make sure you're renaming to dtb.img

Replacing the dtb.img after burning to sd card.

i try it all "dtb.img" after renamed & Replacing

Unfortunately black screen only

It seems that no luck with libreelec

Quote from kostaman

Try the K1 Pro device tree. https://kszaq.libreelec.tv/s905/8.2/device_trees/s905d/

Android Device Tree won't work.

... i have black screen

wait for 2m but not boot to libreelec

hi

I want ask for "dtb.img" for S905D : Dune HD Sky Plus (2GB RAM & DVB-S2) can i use dtb.img from Firmware Android ?

what about for HDR 4K in KIII Pro & this build ?

any test ?