Posts by JohnLocke
-
-
Hi Iridium,
i update LibreELEC to 8.90.005, still have the same problem, but now after 3 minutes of freezing the raspberry is restarting by itself.
I'm not using Samba, because of i didn't know how to configure the Teufel / Raumfeld, to add this as library source. Entering the IP or name didn't work. It didn't find any source.
I'm using wifi, nothing special so that i believe to use the standard RPi wifi. THe raspberr is nearby to the router, not more than 3 meters.
Here is the logfile of my last try.
-
Did I saw right, that till now there is no answer on my Trac ticket ?
-
I did answer twice on Tuesday. Above you'll find one post from 6:29 pm and another one from 6:43 pm.
-
Thanks.
Have you seen my second answer, too?
-
Please open a trac ticket on Kodi - TRAC and include the link to kodi.old.log - this will need the Kodi UPnP developer to investigate further.
Here is the ticket i have opened: #17970 (serious memory leak (or scale issue) in Kodi's UPnP implementation) – Kodi - TRAC
-
I did use Yatse and now removed it from my mobile smartphone. Indeed i used Kore for navigation.
I did a new try. With shown clock i started importing with Teufel app at 4:25 PM. At 4:26 PM the shown clock and the logging information didn't change anymore. Because of that I thought it freezes again. Looking into my Teufel app it shows that 600 songs have been imported. Looking about 10 minutes later in Teufel app it's shows the resource of Kodi UPnP offline. Because of that i restarted the raspberry after 30 minutes, but didn't removed this resource from the Teufel app. After restarting Teufel was scanning again and raspberry freezes after some seconds at 04:56 pm again. Imported songs remained at 600 in Teufel app. I waited till Teufel shows the raspberry as offline, removed the resource from Teufel app, restarted again and created the following new logfiles:
-
And now last try, I formatted my SD card, installed a new libreelec via the LibreELEC USB-SD Creator. I updated to Milhouse #0710.
I changed language and region, activated UPnP / DLNA and deactivated AirPlay and the screensaver.
As you described I cleaned the Kodi folder via PuTTY. I activated the logs. I imported my external HDD to the music library (within that it also hangs up, why i have to do update my library one time).
After that i started my Android Teufel App and scanned this music library as new source. After about 2 minutes 300 songs were scanned and the RP3 freezes again. It is shown "MEM 45592 / 767008 KB - FPS 33.7" "CPU: #0: 44% #1: 16% #2 7.7 % #3: 78% (CPU-KODI 68.92%).
This time i didn't wait 30 minutes for a automatically restart. Should I?
After manually restartig these are my logfiles (info: everytime restarting the RP3 i delete this source from the Android app, because otherwise it would freeze again very fast after restarting, so that it's not possible to get to the logfiles):
because kodi.old.log is too big i uploaded it into my dropbox
-
I recognized that in my last try i didn't activate the JSON-RPC.
So now i did a new try with new logs. For that I deactivated the screensaver. But after about 700 songs the RP3 freezes again and the shown log / mem / CPU and clock didn't change anymore. Also the remote tool on my Laptop an my Android couldn't connect anymore to the RP3.
After 105 minutes the RP3 didn't reboot by itself so that i reboot again by my own.
-
A clean test I will do tomorrow.
In debug mode and when starting the Android app, I can see that the CPU is going up to the 260 %, and the Memory going down to about 40.000 kb. Than it is freezes and the RP3 is not reacting anymore, not to any input, also not the shown Memory or CPU is changing anymore.
In the Android app I can see how many songs are indexed. At the same moment no more further songs are indexed. In this case it have been exactly 1.000 songs. But as described it is depends between about 400 and 1.000.
I opened the journalctl now and it works.
-
I don`t know if i understand right, but the RP3 didn't restart by itself. After 75 minutes restarted by myself.
Here the logfiles you wanted:
I hope i got every information ou needed. Otherwise give me an information what i have to do.
-
I updated to Milhouse 9 #0708.
Here the new log files.
But problem still exists: I start the Teufel Raumfeld Android App and add the RP3 music Library as a new source, about 500 - 1000 songs are going to be scanned, before RP3 is hanging up. Memory is getting more and more low up to 40140 kb and CPU ist getting high up to 120 %.
-
Hi there.
You'll find my log files here Http://ix.io/1gw3
I'm running my RP3 with an external HDD. This had all my mp3 music. The HDD is source for the music library of my RP3. Everything is running smoothly.
As speaker I have a Teufel Cinebar 52 THX. This is running with a Raumfeld Connector. Here the details on Teufel homepage.
My problem is, that when I start the Teufel Raumfeld Android App and add the RP3 music Library as a new source, about 500 - 1000 songs are going to be scanned, before RP3 is hanging up. Memory is getting more and more low up to 40140 kb and CPU ist getting high up to 99 %.
Anyone with an idea how RP3 and Teufel Raumfeld could work together?
-
I still worked with LibreELEC Milhouse #0610 / #0510 and at that moment with LibreELEC 8.2.5. I connected a external HDD via USB with own external power supply.
With both i have the same problem, perhaps allways in that moment, i try to browse the KODI UPnP Media Server with my Teufel Raumfeld Connector or with Windows Media Player.
After a few moments my Raspberry hangs up and freezes. After Reboot the same happens again and again.
Any ideas why that could happen and if it's really a problem with UPnP?
Last try, when reading the Media Server with Teufel Raumfeld Connector, the shown CPU-KODI in log on display freezes by 120 %.
Full Logiles attached and linked:
LibreELEC 8.2.5
https://paste.ubuntu.com/p/4qzdqh6zhx/
Milhouse
https://paste.ubuntu.com/p/3b465yvnkh/
https://paste.ubuntu.com/p/ppfmbmnbcp/
https://paste.ubuntu.com/p/wksgdv4syw/
https://paste.ubuntu.com/p/q6fstvkzdg/
https://paste.ubuntu.com/p/nbbvjsmywt/
https://paste.ubuntu.com/p/wdnxkgxsfj/