Posts by iwik

iwik · Dual TBS 5520SE Libreelec 9.0.0 Intel Generic iwik March 18, 2019 at 8:13 AM

Quote from crazycat

virtual machine is evil

No, that is not a cause of this problem. Thanks to tdanicek you have confirmed that it is problem on NUC too.

iwik · Dual TBS 5520SE Libreelec 9.0.0 Intel Generic iwik March 15, 2019 at 10:13 AM

Quote from crazycat

So some issues in xhci drivers in latest kernels.

Interesting. Maybe there will be more devices with cx231xx affected.

My test virtual machine have this USB controller: USB controller: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

It is pcie card passed to vm.

I dont have Lenovo X230 right here, but accrording to spec it is "Mobile Intel QM77 Express Chipset"

iwik · Dual TBS 5520SE Libreelec 9.0.0 Intel Generic iwik March 14, 2019 at 11:56 AM

TBS support requested remote access and check my setup, only reply from them was " please make sure the insert port is usb 2.0 ."

I currently have it in virtual machine with USB 3 only, but error "cx231xx_send_usb_command: failed with status --32" was same like in setup with lenovo x230 and libreelec. My second tuner "Hauppauge WinTV-dualHD DVB" is working well in this setup.

Maybe tdanicek can you provide your USB port version?

iwik

Hi everybody,

I have classic x86 setup and two dual T2 tuners. First is TBS 5281. I used it with Libreelec 8 and crazycat drivers. It worked fine.

I just bought WinTV-dualHD. This tuner need kernel 4.1.17 and newer. So I have finaly updated to libreelec 9 and I can see WinTV-dualHD, but TBS 5281 stopped working:

Code

  254.298792] input: TurboSight TBS 5281 (cx231xx) MCE IR (734c:5281) as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/rc/rc1/input18
[  254.298880] rc rc1: lirc_dev: driver mceusb registered at minor = 1, raw IR receiver, raw IR transmitter
[  254.482337] mceusb 3-1:1.0: long-range (0x1) receiver active
[  254.532152] mceusb 3-1:1.0: Registered Turbosight Technolog with mce emulator interface version 1
[  254.532158] mceusb 3-1:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x1 active)
[  254.532360] usbcore: registered new interface driver mceusb
[  254.536777] cx231xx 3-1:1.1: New device Turbosight Technolog  @ 480 Mbps (734c:5281) with 8 interfaces
[  254.537256] cx231xx 3-1:1.1: Identified as TurboSight TBS 5281 (card=26)
[  254.537854] i2c i2c-17: Added multiplexed i2c bus 19
[  254.537970] i2c i2c-17: Added multiplexed i2c bus 20
[  254.689154] cx25840 16-0044: cx23102 A/V decoder found @ 0x88 (cx231xx #0-0)
[  256.716892] cx25840 16-0044: loaded v4l-cx231xx-avcore-01.fw firmware (16382 bytes)
[  256.751090] cx231xx 3-1:1.1: v4l2 driver version 0.0.3
[  256.816923] cx231xx 3-1:1.1: Unknown tuner type configuring SIF
[  256.843867] cx231xx 3-1:1.1: Registered video device video0 [v4l2]
[  256.844087] cx231xx 3-1:1.1: Registered VBI device vbi0
[  256.844096] cx231xx 3-1:1.1: video EndPoint Addr 0x84, Alternate settings: 5
[  256.844102] cx231xx 3-1:1.1: VBI EndPoint Addr 0x85, Alternate settings: 2
[  256.844108] cx231xx 3-1:1.1: sliced CC EndPoint Addr 0x86, Alternate settings: 2
[  256.844113] cx231xx 3-1:1.1: TS EndPoint Addr 0x81, Alternate settings: 6
[  256.844119] cx231xx 3-1:1.1: TS EndPoint Addr 0x82, Alternate settings: 6
[  256.844550] usbcore: registered new interface driver cx231xx
[  256.901741] i2c i2c-20: Added multiplexed i2c bus 21
[  256.901744] si2168 20-0064: Silicon Labs Si2168-A20 successfully identified
[  256.901745] si2168 20-0064: firmware version: A 2.0.3
[  256.902827] cx231xx 3-1:1.1: cx231xx_send_usb_command: failed with status --32
[  256.902834] si2157: probe of 18-0060 failed with error -32
[  256.903010] cx231xx 3-1:1.1: Cx231xx dvb Extension initialized

Display More

EDIT: I have done some more tests in ubuntu 18.0.2 LTS with 4.20 kernel. Drivers from TBS page can not be build (TBS Linux Driver is upgrated to v170330) and latest TBS opensource drivers (GitHub - tbsdtv/linux_media: TBS linux open source drivers) have same issue. I have created https://github.com/tbsdtv/linux_media/issues/155

iwik

Hi,

I have found this post when searching solution for my issue. I'm running on Intel i7 (Intel GPU - notebook) and there are segfaults on dvb-t2 channels. But sometimes it works fine for loong time, sometime endless crash loop. I have found already H265 video crashes KODI which links to Driver crash during HEVC playback w/DXVA2 (resume) |Intel Communities with very bad solution - turn off acceleration.