and the remote ? how can I make it to work ?
install to internal twice in one start or install reboot and then install to internal again ?
oh, and how to calibrate screen ? i tried in kodi settings but with no success ,
Posts by Piterek79
-
-
when sd card is inside it works , when I remove SD card it throw error about super-block etc..
how can I use dtb.img to internal ?
another problem is with remote . it does not work even I copy remote.conf to /storage/.config and restart .
with SD card it does not see internal partition . Why ?
LibreELEC:~ # df -h
Filesystem Size Used Available Use% Mounted on
devtmpfs 785.8M 125.5M 660.3M 16% /dev
/dev/mmcblk1p1 511.7M 229.5M 282.3M 45% /flash
/dev/mmcblk1p2 27.4G 4.3M 27.4G 0% /storage
/dev/loop0 125.6M 125.6M 0 100% /
tmpfs 895.2M 0 895.2M 0% /dev/shm
tmpfs 895.2M 7.0M 888.2M 1% /run
tmpfs 895.2M 0 895.2M 0% /sys/fs/cgroup
tmpfs 895.2M 1.9M 893.3M 0% /var
tmpfs 895.2M 4.0K 895.2M 0% /tmp
regards,
-
Hello, I have mxq pro + with 2GB RAM and 16 GB Flash
When I do installtointernal every time I have only MXQ PRO + start screen and that's all.
Which dtb file should I use ? Proc name is s905x013 .Orginally there was Android 7.1
LibreELEC:~ # installtointernal
This script will erase BOOT, SYSTEM, DATA and DTB on your device
and install LE that you booted from SD card/USB drive.
It will create a backup of device tree and recovery partition on your boot media.
The script does not have any safeguards!
Type "yes" if you know what you are doing or anything else to exit: yes
Backing up device tree...done.
Backing up recovery partition...done.
Formatting SYSTEM partition.../dev/system contains a ext4 file system
last mounted on /tmp/system on Thu May 3 13:09:13 2018
e2fsck 1.43.4 (31-Jan-2017)
/dev/system: clean, 11/81920 files, 14304/327680 blocks
done.
Writing kernel image...done.
Copying SYSTEM files...done.
Copying remote.conf...done.
Writing device tree image...done.
Formatting DATA partition.../dev/data is mounted; will not make a filesystem here!
done.
Regards,
