Posts by fasigno

Ahhh I see. Infact my Arch image is a bit old.

Why crazycat the ir is not supported? isn't the os driver official? Is there any possibility to make it functional?

Thank you both for you support!

The zip from tbs website. Is it possible to use it in libreelec?

Here they are attached.

This is the output from ir-keytable and

Found /sys/class/rc/rc0/ (/dev/input/event18) with:

Driver saa716x, table rc-tbs-nec

Supported protocols: NEC RC-5 RC-6 JVC SONY LIRC other

Enabled protocols: NEC

Name: saa716x IR (TurboSight TBS 6280)

bus: 1, vendor/product: 6280:0011, version: 0x0001

Repeat delay = 100 ms, repeat period = 100 ms

I'm not an expert but It seems that it's the dvb module saa716x_tbs_dvb itself that makes it working.

Here it is.

http://ix.io/19f3

Thank you!

Yes, but with no luck in both modes. if I enable lirc with cat /proc/bus/input/devices I can see the eventlircd and lircd-uinput but I presume that they're virtual as I cannot use them with ir-keytable.

Hello everybody,

I have a libreelec 8.2.5 installation with tbs 6280 dvb t card.

The card works perfectly but the remote control bundled with it not.

Previously I had an ArchLinux installation with official tbs drivers and the remote control was working well.

It seems that with libreelec the device isn't event recognised as before; infact I had it as /dev/input/event* device

An old post says that the remote control cannot work, can you give me any hint?

I've tryed CvH build with no success, and I cannot understand if the drivers of those builds are now in the official release of le.

Thank you in advance

fasigno