I run Libreelec on a chromebox. I have recently bought an Amazon Firestick that I have also installed Kodi on.
Can I use my Libreelec as a server that the Firestick reads its library from? I have managed to access the files via upnp, but not been able to scan the media to library.
How do I do this?
Ryan
Has anyone got Netflix working on libreelec at the moment?
It used to work fine for me but I haven’t been able to find a working configuration for ages.
I’m running libreelec 9.0.2 on an asus chromebox and am trying all manner of different Netflix builds but nothing is working.
Anyone know?
Turns out I bought the wrong wifi dongle for my pi.
Is there a list of supported wifi dongle chipsets- particularly ones that support tethered APs. I want to tether mine to my iphone
Turns out I was barking up the wrong tree. My dongle uses the MT7610U chip.
Back to the drawing board for me, think I'll just have to buy a new one that is actually supported
No luck.
Got a fully working version of 7.90.005 but still no connection via the edifax dongle for some reason.
I was imagining it to just work straight away, my other cheaper one does.
Not really sure what to do from here
[hr]
I'll submit something to the alpha forum
I don't think my manual update worked, it's hung at startup.
I'll try a fresh install tomorrow after work. Seems like it should all work fine
Running an original pi model B
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.13 (chewitt@buildbox) (gcc version 5.3.0 (GCC) ) #1 Sat Jun 25 04:53:15 BST 2016
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine model: Raspberry Pi Model B Rev 2
[ 0.000000] cma: Reserved 8 MiB at 0x15400000
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] On node 0 totalpages: 90112
[ 0.000000] free_area_init_node: node 0, pgdat 808d3590, node_mem_map 95cd4800
[ 0.000000] Normal zone: 792 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 90112 pages, LIFO batch:15
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 89320
[ 0.000000] Kernel command line: root=/dev/ram0 rdinit=/init BOOT_IMAGE=/kernel.img usbcore.autosuspend=-1 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708.boardrev=0xf bcm2708.serial=0x31bf147d smsc95xx.macaddr=B8:27:EB:BF:14:7D bcm2708_fb.fbswap=1 bcm2708.uart_clock=3000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 quiet
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 339156K/360448K available (5235K kernel code, 201K rwdata, 1400K rodata, 2172K init, 367K bss, 13100K reserved, 8192K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0x96800000 - 0xff800000 (1680 MB)
[ 0.000000] lowmem : 0x80000000 - 0x96000000 ( 352 MB)
[ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ 0.000000] .text : 0x80008000 - 0x80682fbc (6636 kB)
[ 0.000000] .init : 0x80683000 - 0x808a2000 (2172 kB)
[ 0.000000] .data : 0x808a2000 - 0x808d45a8 ( 202 kB)
[ 0.000000] .bss : 0x808d45a8 - 0x809304e0 ( 368 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000028] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[ 0.000068] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[ 0.000152] bcm2835: system timer (irq = 27)
[ 0.000389] Console: colour dummy device 80x30
[ 0.000595] console [tty0] enabled
[ 0.000625] Calibrating delay loop... 697.76 BogoMIPS (lpj=1161216)
[ 0.026922] pid_max: default: 32768 minimum: 301
[ 0.027075] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.027095] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.027960] Disabling cpuset control group subsystem
[ 0.027998] Initializing cgroup subsys io
[ 0.028027] Initializing cgroup subsys memory
[ 0.028073] Initializing cgroup subsys devices
[ 0.028096] Initializing cgroup subsys freezer
[ 0.028139] CPU: Testing write buffer coherency: ok
[ 0.028571] Setting up static identity map for 0x81c0 - 0x81f8
[ 0.030135] devtmpfs: initialized
[ 0.037432] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 0.037743] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.039092] pinctrl core: initialized pinctrl subsystem
[ 0.039940] NET: Registered protocol family 16
[ 0.045810] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[ 0.046716] cpuidle: using governor ladder
[ 0.046748] cpuidle: using governor menu
[ 0.052090] Serial: AMBA PL011 UART driver
[ 0.052427] 20201000.uart: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2
[ 0.053030] bcm2835-mbox 2000b880.mailbox: mailbox enabled
[ 0.091975] bcm2835-dma 20007000.dma: DMA legacy API manager at f2007000, dmachans=0x1
[ 0.092636] SCSI subsystem initialized
[ 0.093132] usbcore: registered new interface driver usbfs
[ 0.093247] usbcore: registered new interface driver hub
[ 0.093391] usbcore: registered new device driver usb
[ 0.094358] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-06-20 18:18
[ 0.121785] clocksource: Switched to clocksource timer
[ 0.135815] NET: Registered protocol family 2
[ 0.136851] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.136947] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.137044] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.137151] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.137184] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.137463] NET: Registered protocol family 1
[ 0.137960] RPC: Registered named UNIX socket transport module.
[ 0.137982] RPC: Registered udp transport module.
[ 0.137992] RPC: Registered tcp transport module.
[ 0.138001] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.346224] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.361506] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.364523] NFS: Registering the id_resolver key type
[ 0.364612] Key type id_resolver registered
[ 0.364627] Key type id_legacy registered
[ 0.364676] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.370881] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.370931] io scheduler noop registered (default)
[ 0.370958] io scheduler deadline registered
[ 0.371027] io scheduler cfq registered
[ 0.373819] BCM2708FB: allocated DMA memory 55800000
[ 0.373889] BCM2708FB: allocated DMA channel 0 @ f2007000
[ 0.379210] Console: switching to colour frame buffer device 82x26
[ 1.201177] bcm2835-rng 20104000.rng: hwrng registered
[ 1.201431] vc-cma: Videocore CMA driver
[ 1.201450] vc-cma: vc_cma_base = 0x00000000
[ 1.201462] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
[ 1.201472] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
[ 1.201835] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[ 1.221053] brd: module loaded
[ 1.221333] loop: module loaded
[ 1.224617] nbd: registered device at major 43
[ 1.235411] vchiq: vchiq_init_state: slot_zero = 0x95880000, is_master = 0
[ 1.237603] usbcore: registered new interface driver rtsx_usb
[ 1.237649] Loading iSCSI transport class v2.0-870.
[ 1.238359] iscsi: registered transport (tcp)
[ 1.238878] tun: Universal TUN/TAP device driver, 1.6
[ 1.238898] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 1.239434] usbcore: registered new interface driver smsc95xx
[ 1.239624] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.440268] Core Release: 2.80a
[ 1.440298] Setting default values for core params
[ 1.440336] Finished setting default values for core params
[ 1.640725] Using Buffer DMA mode
[ 1.640748] Periodic Transfer Interrupt Enhancement - disabled
[ 1.640759] Multiprocessor Interrupt Enhancement - disabled
[ 1.640771] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 1.640844] Dedicated Tx FIFOs mode
[ 1.641311] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0x95814000 dma = 0x55814000 len=9024
[ 1.641348] FIQ FSM acceleration enabled for :
[ 1.641348] Non-periodic Split Transactions
[ 1.641348] Periodic Split Transactions
[ 1.641348] High-Speed Isochronous Endpoints
[ 1.641348] Interrupt/Control Split Transaction hack enabled
[ 1.641380] dwc_otg: Microframe scheduler enabled
[ 1.641454] WARN::hcd_init_fiq:413: FIQ on core 0 at 0x803a0eac
[ 1.641473] WARN::hcd_init_fiq:414: FIQ ASM at 0x803a1184 length 36
[ 1.641503] WARN::hcd_init_fiq:439: MPHI regs_base at 0x968a2000
[ 1.641567] dwc_otg 20980000.usb: DWC OTG Controller
[ 1.641625] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1
[ 1.641684] dwc_otg 20980000.usb: irq 56, io mem 0x00000000
[ 1.641741] Init: Port Power? op_state=1
[ 1.641750] Init: Power Port (0)
[ 1.642063] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.642087] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.642103] usb usb1: Product: DWC OTG Controller
[ 1.642118] usb usb1: Manufacturer: Linux 4.4.13 dwc_otg_hcd
[ 1.642132] usb usb1: SerialNumber: 20980000.usb
[ 1.643096] hub 1-0:1.0: USB hub found
[ 1.643174] hub 1-0:1.0: 1 port detected
[ 1.643728] dwc_otg: FIQ enabled
[ 1.643745] dwc_otg: NAK holdoff enabled
[ 1.643754] dwc_otg: FIQ split-transaction FSM enabled
[ 1.643807] Module dwc_common_port init
[ 1.644156] usbcore: registered new interface driver uas
[ 1.644379] usbcore: registered new interface driver usb-storage
[ 1.644746] mousedev: PS/2 mouse device common for all mice
[ 1.644982] i2c /dev entries driver
[ 1.646577] bcm2835-cpufreq: min=700000 max=700000
[ 1.647059] sdhci: Secure Digital Host Controller Interface driver
[ 1.647078] sdhci: Copyright(c) Pierre Ossman
[ 1.647517] sdhost: log_buf @ 95813000 (55813000)
[ 1.711847] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 1.712318] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.712818] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.713040] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.716310] usbcore: registered new interface driver usbhid
[ 1.716330] usbhid: USB HID core driver
[ 1.738356] NET: Registered protocol family 10
[ 1.740368] NET: Registered protocol family 17
[ 1.740565] Key type dns_resolver registered
[ 1.742477] vc-sm: Videocore shared memory driver
[ 1.742507] [vc_sm_connected_init]: start
[ 1.743318] [vc_sm_connected_init]: end - returning 0
[ 1.743772] console [netcon0] enabled
[ 1.743827] netconsole: network logging started
[ 1.743861] of_cfs_init
[ 1.743996] of_cfs_init: OK
[ 1.751538] Freeing unused kernel memory: 2172K (80683000 - 808a2000)
[ 1.796547] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.798790] mmc0: new high speed SD card at address 59b4
[ 1.805299] mmcblk0: mmc0:59b4 USD 1.87 GiB
[ 1.806919] mmcblk0: p1 p2
[ 1.842129] Indeed it is in host mode hprt0 = 00021501
[ 2.078589] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 2.078808] Indeed it is in host mode hprt0 = 00001101
[ 2.258970] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[ 2.259022] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.260075] hub 1-1:1.0: USB hub found
[ 2.260272] hub 1-1:1.0: 3 ports detected
[ 2.538537] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 2.632259] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 2.632291] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.635373] smsc95xx v1.0.4
[ 2.689918] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:bf:14:7d
[ 2.768569] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
[ 2.832119] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[ 2.833058] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[ 2.850556] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.878177] usb 1-1.2: New USB device found, idVendor=7392, idProduct=a711
[ 2.878211] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.878226] usb 1-1.2: Product: WiFi
[ 2.878239] usb 1-1.2: Manufacturer: MediaTek
[ 2.878253] usb 1-1.2: SerialNumber: 1.0
[ 2.958581] usb 1-1.3: new full-speed USB device number 5 using dwc_otg
[ 3.066087] usb 1-1.3: New USB device found, idVendor=045e, idProduct=0800
[ 3.066121] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.066139] usb 1-1.3: Product: Microsoft® Nano Transceiver v2.0
[ 3.066153] usb 1-1.3: Manufacturer: Microsoft
[ 3.077876] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/platform/soc/http://20980000.usb/usb1/1-1/1-1.3…01/input/input0
[ 3.130011] hid-generic 0003:045E:0800.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® Nano Transceiver v2.0] on usb-20980000.usb-1.3/input0
[ 3.169916] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/platform/soc/http://20980000.usb/usb1/1-1/1-1.3…02/input/input1
[ 3.171710] hid-generic 0003:045E:0800.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® Nano Transceiver v2.0] on usb-20980000.usb-1.3/input1
[ 3.243201] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/platform/soc/http://20980000.usb/usb1/1-1/1-1.3…03/input/input2
[ 3.296584] hid-generic 0003:045E:0800.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® Nano Transceiver v2.0] on usb-20980000.usb-1.3/input2
[ 3.540939] systemd[1]: System time before build time, advancing clock.
[ 3.550537] random: systemd urandom read with 105 bits of entropy available
[ 3.570270] systemd[1]: systemd 229 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 3.571371] systemd[1]: Detected architecture arm.
[ 3.572669] systemd[1]: Set hostname to <LibreELEC>.
[ 3.958661] systemd[1]: Listening on udev Control Socket.
[ 3.959775] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.960311] systemd[1]: Listening on udev Kernel Socket.
[ 3.961108] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.962059] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.965290] systemd[1]: Created slice User and Session Slice.
[ 3.966155] systemd[1]: Listening on Journal Socket.
[ 3.967216] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.967570] systemd[1]: Reached target Paths.
[ 3.968989] systemd[1]: Created slice System Slice.
[ 3.975577] systemd[1]: Starting Show Version...
[ 3.992293] systemd[1]: Mounting Debug File System...
[ 4.019050] systemd[1]: Starting Mounting swapfile...
[ 4.064221] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 4.122022] systemd[1]: Mounting Variable Directory...
[ 4.151283] systemd[1]: Mounting Temporary Directory...
[ 4.173612] random: nonblocking pool is initialized
[ 4.229904] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 4.310060] systemd[1]: Starting Load Kernel Modules...
[ 4.366724] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.368320] systemd[1]: Reached target Slices.
[ 4.422206] systemd[1]: Starting Setup machine-id...
[ 4.547308] systemd[1]: Mounted Debug File System.
[ 4.547886] systemd[1]: Mounted POSIX Message Queue File System.
[ 4.548263] systemd[1]: Mounted Variable Directory.
[ 4.559382] systemd[1]: Mounted Temporary Directory.
[ 4.572327] systemd[1]: Started Show Version.
[ 4.607866] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 4.636185] systemd[1]: Started Remount Root and Kernel File Systems.
[ 4.640531] systemd[1]: Started Load Kernel Modules.
[ 4.647548] systemd[1]: Started Setup machine-id.
[ 4.736560] systemd[1]: Started Mounting swapfile.
[ 5.280845] systemd[1]: Reached target Swap.
[ 5.287192] systemd[1]: Starting Journal Service...
[ 5.300445] systemd[1]: Starting Apply Kernel Variables...
[ 5.320622] systemd[1]: Mounting Configuration File System...
[ 5.367521] systemd[1]: Starting udev Coldplug all Devices...
[ 5.407488] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 5.454895] systemd[1]: Starting Setup Timezone data...
[ 5.615093] systemd[1]: Mounted Configuration File System.
[ 5.627921] systemd[1]: Started Apply Kernel Variables.
[ 5.843169] systemd[1]: Started Create Static Device Nodes in /dev.
[ 5.852593] systemd[1]: Started Setup Timezone data.
[ 6.143668] systemd[1]: Started Journal Service.
[ 6.805077] systemd-journald[176]: Received request to flush runtime journal from PID 1
[ 12.293518] Console: switching to colour dummy device 80x30
[ 12.773522] bcm2835-wdt 20100000.watchdog: Broadcom BCM2835 watchdog timer
[ 12.845568] gpiomem-bcm2835 20200000.gpiomem: Initialised: Registers at 0x20200000
[ 17.985378] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 17.986124] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.494179] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
[ 19.504418] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.574046] 8021q: 802.1Q VLAN Support v1.8
[hr]
I am running 7.0.2.
I just read the latest alpha fixes support for 5ghz 8812au chips.
I'm going to try it
Just wondering if anyone uses the EW-7711ULC wifi dongle on the raspberry pi and if so how did they install the drivers?
Linux drivers exist on the website but I've no idea how to get them into libreelec
Hi,
I am trying to set up a pi with LibreElec, mainly just as an AirPlay receiver.
Is there any way of changing libreelecs settings via ssh or some other means, as I won't have it hooked up to a monitor
Ryan
